1976 Chevrolet C20 Intake Manifold Parts
More 1976 Chevrolet C20 Intake Manifold Parts
Find your specific 1976 Chevrolet C20 original or aftermarket Intake Manifold Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1976 Chevrolet C20 Intake Manifold Parts
Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy (Part No.2601)
from
$376.99Product Features:
- Based on Performer Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg .Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Fits Both Spread and Square Bore Carburetors
- Also in Polished/PermaStar/EnduraShine Finish
Edelbrock – RPM Air-Gap Big Block Chevy 2-O Black Intake Manifold (Part No.75613)
from
$588.99
Edelbrock part #75613 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8’s with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. The RPM Air-Gap incorporates the same race-winning te
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.45 in. Front Height, 5.22 in. Center Height, 6 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Weiand – Pro-Street; Supercharger Intake Manifold (Part No.6150WIN)
Edelbrock – RPM Air-Gap Big Block Chevy 2-R Intake Manifold (Part No.7562)
from
$468.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM street-driven power. Dual-plane high-rise intake with 180 degree firing order. Produces incredible top-end horsepower. Retains good throttle response and acceleration. Larger plenum and runners maximize other upgrades. Edelbrock total power package maximizes gains. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)
from
$484.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.
Product Features:
See More
Product Features:
- Based on C26 Low Profile with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- 1.625 in. Taller Than Low-Profile PN[5425]
- Also Available In EnduraShine Finish PN[75254]
- Also Available As Complete Kit PN[2025/20254]
- Best When Matched with Edelbrock 500cfm Carburetor
- Use Fuel Line Kit PN[8088/8091]
- Use Progressive Throttle Linkage Kit PN[7094]
Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)
from
$473.99
Product Features:
See More
- Designed for Idle to 5500 RPM
- Manifold has a Balanced 180+ Firing Order
- Contains Exhaust Gas Heat Riser
- Offers Excellent Performance Potential
- Front Oil Filler Tube Boss Included
- Carburetor Center-to-Center Dimensions = 5-1/2 in
- Also Available Polished PN[5419] But Not Fit HEI
- Use Rochester 2GC (small 1-7/16 in bore)
Edelbrock – C-357-B Triple-Deuce Intake Manifold for 1955-86 262-400 c.i.d. SB Chevys (Part No.5418)
from
$514.99
Edelbrock part #5418 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers excelle
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type 6-Pack Style Flange
- 3.77 in. Front Height, 4.35 in. Center Height, 4.88 in. Rear Height
- Satin Finish
- Non-EGR
Dorman – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.02604)
from
$6.99
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for a long service life
- Torque values listed on parts (where applicable)
- Easy to install
- Constructed to strict engineering quality standards
Dorman – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (sold by each) (Part No.570-010)
from
$4.49
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)
from
$4.29
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for a long service life
- Torque values listed on parts (where applicable)
- Easy to install
- Constructed to strict engineering quality standards
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90314-2)
from
$29.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Ultra Seal; Intake Gasket (Part No.5820)
from
$34.99
Nitrile rubber and fiber. Will not crack or split and resists wicking. Withstands 600 plus degree temperatures. Silicone bead around the port creates a tight leak proof seal.
Product Features:
See More
Product Features:
- Manufactured from high temperature gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- No gasket sealer required
Mr. Gasket – Intake Gasket (Part No.101B)
from
$28.99
Mr. Gasket standard intake gasket sets are manufactured from a blend of nitrile rubber and fiber, for excellent sealing and durability. They’re precision die-cut for each specific application to ensure a great fit, and can be custom-trimmed for modified ports where needed. The sets come complete with all necessary seals and block-off plates.
Product Features:
See More
Product Features:
- Made from cellulose/nitrile composition
- Provides excellent sealing and durability
- Can be trimmed if necessary
- For OE replacement and high performance apps
Mr. Gasket – Ultra Seal; Intake Gasket (Part No.5821)
from
$30.99
Nitrile rubber and fiber. Will not crack or split and resists wicking. Withstands 600 plus degree temperatures. Silicone bead around the port creates a tight leak proof seal.
Product Features:
See More
Product Features:
- Made from cellulose/nitrile composition material
- Provides excellent sealing and durability
- This gasket has silicone beading on both sides
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90240-2)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 93040)
from
$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 91585)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Gasket (Part No.143)
from
$35.99
Mr. Gasket standard intake gasket sets are manufactured from a blend of nitrile rubber and fiber, for excellent sealing and durability. They’re precision die-cut for each specific application to ensure a great fit, and can be custom-trimmed for modified ports where needed. The sets come complete with all necessary seals and block-off plates.
Product Features:
See More
Product Features:
- Forms an airtight leak proof seal
- Precision die cut for excellent seal and fit
- Can be trimmed to meet your specifications
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90323)
from
$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Bolt Kit (Part No.5004)
from
$61.99
Finish your custom engine job with these show quality grade 5 chromed bolts, includes AN washers which have no exposed shoulder for a professional appearance.
Product Features:
See More
Product Features:
- Intake bolt kit
- Chrome plated
- Includes an type washers
- Ideal for street rods/machines
ARP Auto Racing – For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers (Part No.435-2101)
from
$59.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Wont Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
ARP Auto Racing – For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers (Part No.435-2001)
from
$59.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 Psi Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
Spectre – Bolt Kit Intake Hex Head (Part No.4652)
from
$9.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.
Product Features:
See More
Product Features:
- Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
- 3/8 inch-16 by 1 inch bolts
- Kit includes 12 bolts and washers
- Manufactured from high quality steel
- Bolts feature hex heads
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)
from
$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
- 1″ Long
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$14.99
Choose from grade 5 hex or socket head intake bolts or grade 8 bolts with twelve point smaller-than-standard head and flange, ideal for where space is minimal. Bolts and washers are bright zinc plated for protection and appearance.
Product Features:
See More
Product Features:
- Zinc plated
- Grade 5 quality steel
- Washers included
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)
from
$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
Popular 1976 Chevrolet C20 Intake Manifold Parts Categories
1976 Chevrolet C20 Intake Manifold Parts
Maybe you’re in the middle of a full rebuild of that 1976 Chevrolet C20. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 53 different Intake Manifold Parts in our inventory ranging from $4.29 to $1,776.99. That means you can find the exact parts or products you need to keep that 1976 Chevrolet C20 running smoothly.
Intake Manifold Parts are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1976 Chevrolet C20. Mr. Gasket, Dorman, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Intake Manifold Parts for your 1976 Chevrolet C20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 291 reviews in this category, some of the top rated parts include Ultra Seal; Intake Gasket with 5.0 stars and Keith Dorton Series; Intake Manifold with 5.0 stars.
So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1976 Chevrolet C20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Intake Manifold Parts Brands To Make Your 1976 Chevrolet C20 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 Chevrolet C20 demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your C20 the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.
Popular Edelbrock Intake Manifold Parts
We carry Edelbrock parts in our stock across Intake Manifolds categories, plus more. For a 1976 Chevrolet C20, our most popular Edelbrock Intake Manifold Parts include:
Top 1976 Chevrolet C20 Intake Manifold Parts from Felpro
Felpro products are another trusted brand when it comes to Intake Manifold Parts for your 1976 Chevrolet C20. Popular Felpro parts include:
FAQs for 1976 Chevrolet C20 Intake Manifold Parts
What are the most purchased Intake Manifold Parts for the 1976 Chevrolet C20?
Out of 53 Intake Manifold Parts for the 1976 Chevrolet C20, the most popular in our inventory are:
from
$6.99
(4)
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In.
Intake Manifold Expansion Plugs
What are the top-rated 1976 Chevrolet C20 Intake Manifold Parts?
Top-rated Intake Manifold Parts for your 1976 Chevrolet C20 based on customer reviews/ratings are:
from
$458.99
(1)
Keith Dorton Series; Intake Manifold
“This is a excellent choice for dirt circle track racing for sbc in the 350-377 range.”
from
$4.29
(1)
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In.
“You will still have to take the engine apart”
