1976 Bricklin SV-1 Engine Parts
Find Your Specific 1976 Bricklin SV-1 Engine Parts
Below you will find various in-demand Bricklin Engine Parts, components and accessories for your 1976 SV-1. Advance Auto Parts has popular SV-1 parts like Engine Gaskets and Seals, Engine Internals, Engine Timing Parts and more. You’ll also find aftermarket and OEM Engine Parts for other SV-1 model years including
1974
1975 and more. Select a category of 1976 Bricklin SV-1 Engine Parts below and start saving instantly.
Popular 1976 Bricklin SV-1 Engine Parts Categories
Essential Engine Parts for 1976 Bricklin SV-1s
Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)
from
$117.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Sure Seat Valve Springs (Part No.5825)
from
$155.99
The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.
Product Features:
See More
Product Features:
- Non-Rotator Type
- 1.460 in. Outer Diameter
- Made In The USA
- Single Coil Spring Type
- Set of 16
Edelbrock – Performer-Plus camshaft for Small-Block Ford 351W V-8 applications (Part No.2182)
from
$356.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer RPM Camshaft And Lifter Kit #7182 For Small-Block Ford 351 W V8 (Part No.7182)
from
$448.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for AMC 343-401 V8 (Part No.7132)
from
$449.99
Product Features:
See More
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
National – Engine Crankshaft Seal (Part No.710447)
from
$12.29
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi-Purpose Seal (Part No.2942)
from
$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Engine Crankshaft Seal (Part No.5117)
from
$44.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: split-lip; 2-piece
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 289-302 V8 (Part No.2221)
from
$517.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.
Product Features:
See More
Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
- Use Only Stock Ratio Rocker Arms
Edelbrock – Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft (Part No.5027)
from
$1838.99
The Edelbrock #5027 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex
Product Features:
See More
Product Features:
- Complete Pair For Mechanical and Hydraulic Flat Tappet
- 60cc Combustion Chamber Volume
- 205cc Intake/62cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – Small-Block Ford E-205 Cylinder Head w/ Flat Tappet Camshaft (Part No.5028)
from
$1687.99
The Edelbrock #5028 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex
Product Features:
See More
Product Features:
- Complete Pair For Hydraulic Flat Tappet
- 60cc Combustion Chamber Volume
- 205cc Intake/62cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)
from
$2.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
National – Engine Harmonic Balancer Repair Sleeve (Part No.88187)
from
$12.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
Competition Cams – Set of 16 – 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess (Part No.611-16)
from
$479.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
Product Features:
See More
Product Features:
- For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
- Super Locks are recommended in all race applications
Mr. Gasket – Chrome Plated Steel Crankshaft Pulley (Part No.8827)
from
$87.99
Replace your stock black engine pulleys with chrome plated steel pulleys from Mr. Gasket.
Product Features:
See More
Product Features:
- Single Groove
- Chrome Plated
Upgrade your 1976 Bricklin SV-1 with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 1976 Bricklin SV-1, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Bricklin or enhancing its overall performance, Engine Parts are key to keeping your SV-1 functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Engine Parts for the 1976 Bricklin SV-1, designed to meet your needs without breaking the bank.
From
Engine Gaskets and Seal
replacements to
Engine Internals
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1976 Bricklin SV-1 at great prices.
Our Engine Parts inventory for this model
ranges from just $2.99 to $1,838.99, with
an average price of $406.02.
Our 15 Engine Parts in stock come from 6 trusted brands, so you’re sure to find the right part for your 1976 Bricklin SV-1 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1976 Bricklin SV-1, we stock popular OEM and aftermarket Engine Parts from top names
like National, and more.
National Engine Parts
start at just $12.49 and boast an impressive 4.3 stars average rating from customers.
With 3 customer reviews and counting, our 1976 Bricklin SV-1 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products
and more to make sure your 1976 Bricklin SV-1 is always ready to roll. We’re committed to providing you with everything you need to keep your SV-1 in top shape, all in one place.
Start shopping confidently below for your 1976 Bricklin SV-1!
Best-Selling Engine Gaskets and Seals for 1976 Bricklin SV-1s
Enhance the driving experience in your Bricklin with 1 quality Engine Gaskets and Seal components, starting at $2.99.
Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)
from
$2.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Most Popular 1976 Bricklin SV-1 Engine Internals
Customize your Bricklin with 3 Engine Internals products
like Crankshaft Seals, all
priced under $44.49.
Felpro – REAR MAIN BEARING SEAL SET (Part No.BS 40042)
from
$16.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
National – Multi-Purpose Seal (Part No.2942)
from
$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Engine Crankshaft Seal (Part No.5117)
from
$44.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: split-lip; 2-piece
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Top Picks for 1976 Bricklin SV-1 Engine Timing Parts
Upgrade Bricklin SV-1s with top-quality Engine Timing Parts parts, including 1 OEM and aftermarket selections for your 1976 model.
National – Engine Harmonic Balancer Repair Sleeve (Part No.88187)
from
$12.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
In-Demand Valve Cover and Cylinder Heads for 1976 Bricklin SV-1s
Select from 5 premium Valve Cover and Cylinder Heads parts for your 1976 Bricklin SV-1, with prices ranging from $117.99 to $1,838.99.
Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)
from
$117.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Competition Cams – Set of 16 – 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess (Part No.611-16)
from
$479.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
Product Features:
See More
Product Features:
- For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
- Super Locks are recommended in all race applications
Edelbrock – Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft (Part No.5027)
from
$1838.99
The Edelbrock #5027 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex
Product Features:
See More
Product Features:
- Complete Pair For Mechanical and Hydraulic Flat Tappet
- 60cc Combustion Chamber Volume
- 205cc Intake/62cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – Small-Block Ford E-205 Cylinder Head w/ Flat Tappet Camshaft (Part No.5028)
from
$1687.99
The Edelbrock #5028 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex
Product Features:
See More
Product Features:
- Complete Pair For Hydraulic Flat Tappet
- 60cc Combustion Chamber Volume
- 205cc Intake/62cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – Sure Seat Valve Springs (Part No.5825)
from
$155.99
The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.
Product Features:
See More
Product Features:
- Non-Rotator Type
- 1.460 in. Outer Diameter
- Made In The USA
- Single Coil Spring Type
- Set of 16
Most Sold 1976 Bricklin SV-1 Camshafts
Explore our best-selling Bricklin parts for the 1976 SV-1 among 4 OEM and aftermarket options starting from $306.99.
Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 289-302 V8 (Part No.2221)
from
$517.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.
Product Features:
See More
Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
- Use Only Stock Ratio Rocker Arms
Edelbrock – Performer RPM Camshaft And Lifter Kit #7182 For Small-Block Ford 351 W V8 (Part No.7182)
from
$448.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus camshaft for Small-Block Ford 351W V-8 applications (Part No.2182)
from
$356.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – CAMSHAFTS (Part No.2117)
from
$306.99
CAMSHAFTS
Top-Rated Engine Parts Brands For Your 1976 Bricklin SV-1
Shop for the best-rated brands offering Engine Parts and other products for your 1976 Bricklin SV-1s. Below you’ll find some of our best rated Engine Parts from National, and more. Engine Parts from these brands that fit a 1976 SV-1 start at just $12.49 and are rated as high as 4.3 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular National 1976 Bricklin SV-1 Engine Parts
When it comes to maintaining or upgrading your 1976 Bricklin SV-1, using quality Engine Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Engine Parts, specifically designed for the 1976 Bricklin SV-1. With over 1 National brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.49. Plus, with over 2 customer reviews and an average rating of 4.3 stars, you can trust that our National Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$12.49
(2)
Engine Harmonic Balancer Repair Sleeve
“This was needed for an off-label application, and has done the job perfectly. Service was outstanding, as always!”
FAQs for 1976 Bricklin SV-1 Engine Parts
Which Engine Parts are best-sellers for 1976 Bricklin SV-1s?
Out of 15 Engine Parts that fit 1976 Bricklin SV-1s, the following parts are the top sellers:
- REAR MAIN BEARING SEAL SET (5183073) – $16.99
- Multi-Purpose Seal (3267776) – $13.49
- Set of 16 – 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess (10203683) – $479.99
What’s the price range for 1976 Bricklin SV-1 Engine Parts?
Engine Part prices for the 1976 Bricklin SV-1 start at $2.99 and go up to $1,838.99 for the most premium parts.
What’s the average price of a Engine Part for a 1976 Bricklin SV-1?
The average price for Engine Parts for the 1976 Bricklin SV-1 is $406.02. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Bricklin SV-1 model years?
What are the cheapest Engine Parts for my 1976 Bricklin SV-1?
The cheapest 1976 Bricklin SV-1 Engine Parts we carry in stock are:
- Fuel Pump Mounting Gasket (12548153) – $2.99
- Engine Harmonic Balancer Repair Sleeve (18445042) – $12.49
- Multi-Purpose Seal (3267776) – $13.49
- REAR MAIN BEARING SEAL SET (5183073) – $16.99
- Engine Crankshaft Seal (18444547) – $44.49
What are the top-rated Engine Parts that fit the 1976 Bricklin SV-1?
Out of 3 reviews by customers, our 1976 Bricklin SV-1 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1976 Bricklin SV-1 and their top-rated products:
- Valve Cover and Cylinder Heads
- Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (17140457) – $117.99
What types of Engine Parts do you sell for my 1976 Bricklin SV-1?
As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1976 Bricklin SV-1:
Can I get help with 1976 Bricklin SV-1 Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Bricklin Engine Parts and more.
What is your return policy for Bricklin SV-1 Engine Parts?
Advance Auto Parts keeps returns simple. For new Bricklin SV-1 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
