1976 BMW 530i Tie Rods

Essential 1976 BMW 530i Tie Rods

Rare Parts – Tie Rod End (Part No.RP26537)

Tie Rod End

from

$33.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Rare Parts – Tie Rod End (Part No.RP28646)

Tie Rod End

from

$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300066560LEM)

Lemfoerder Tie Rod Assembly

from

$89.67
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:
  • Original Equipment Manufacturer
  • High grade synthetic socket materials
  • Outstanding slide properties
  • High ball stud articulation angles.
See More

TRW – TRW Tie Rod (Part No.M3001454330TRW)

TRW Tie Rod

from

$56.83
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
See More

MOOG – Tie Rod End (Part No.ES800478)

Tie Rod End

from

$75.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Tie Rod End (Part No.EV800292)

Tie Rod End

from

$63.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Steering Tie Rod End (Part No.ES80954)

Steering Tie Rod End

from

$93.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Loose or worn chassis parts can lead to premature tire wear
  • Exclusive cover plate protects against contaminants leaking into the bearing surface
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

MOOG – Tie Rod End (Part No.EV800266)

Tie Rod End

from

$90.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Rare Parts – Tie Rod End (Part No.RP28756)

Tie Rod End

from

$86.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010281030LEM)

ZF/Lemfoerder Tie Rod End

from

$102.03
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Rare Parts – Tie Rod End (Part No.RP28942)

Tie Rod End

from

$111.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Rare Parts – Tie Rod End (Part No.RP28647)

Tie Rod End

from

$58.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

MOOG – Steering Tie Rod End (Part No.ES80953)

Steering Tie Rod End

from

$93.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Loose or worn chassis parts can lead to premature tire wear
  • Exclusive cover plate protects against contaminants leaking into the bearing surface
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

Rare Parts – Tie Rod End (Part No.RP26538)

Tie Rod End

from

$86.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010669497LEM)

ZF/Lemfoerder Tie Rod End

from

$32.78
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Rare Parts – Tie Rod End (Part No.RP27760)

Tie Rod End

from

$103.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

1976 BMW 530i Tie Rods

Maybe you’re in the middle of a full rebuild of that 1976 BMW 530i. Maybe you just need a couple of Tie Rods. Either way, Advance Auto Parts has 2 different Tie Rods in our inventory ranging from $33.99 to $86.99. That means you can find the exact parts or products you need to keep that 1976 BMW 530i running smoothly.

Tie Rods are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 1976 BMW 530i. Rare are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Tie Rods for your 1976 BMW 530i, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Tie Rods to keep your 1976 BMW 530i rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Tie Rods Brands To Make Your 1976 BMW 530i Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 BMW 530i demands trusted brand parts and products to keep it running. Many trusted brands of Tie Rods make up Advance Auto Parts’ inventory, and all are ready to help make your 530i the best it can be. Be sure to browse some of our top Tie Rods brands and parts.

FAQs for 1976 BMW 530i Tie Rods

What are the most purchased Tie Rods for the 1976 BMW 530i?

Out of 2 Tie Rods for the 1976 BMW 530i, the most popular in our inventory are:
Tie Rod End
from $33.99
This product is not rated
Tie Rod End
Tie Rod Ends
Tie Rod End
from $86.99
This product is not rated
Tie Rod End
Tie Rod Ends