1976 BMW 3.0Si Fuel and Emissions Systems
Find Your Specific 1976 BMW 3.0Si Fuel and Emissions Systems
Below you will find various in-demand BMW Fuel and Emissions Systems, components and accessories for your 1976 3.0Si. Advance Auto Parts has popular 3.0Si parts like Air Flow Sensors, Gas Caps, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other 3.0Si model years including
1971
1975 and more. Select a category of 1976 BMW 3.0Si Fuel and Emissions Systems below and start saving instantly.
Popular 1976 BMW 3.0Si Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 1976 BMW 3.0Sis
Delphi – Electric Fuel Pump: With Bracket, Hose Clamps, Nut/Bolt, Rubber Hoses, Splices, Terminal Hardware (Part No.FD0037)
from
$72.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
VDO – Fuel Pump Tank Seal (Part No.E300462593VDO)
from
$5.00
Fuel Pump Tank Seal
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1125)
from
$43.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Fuel Injector Seal Kit (Part No.AS010)
from
$11.49
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Carquest Premium – Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10810)
from
$9.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Cap: 10582, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10582)
from
$19.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Upgrade your 1976 BMW 3.0Si with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1976 BMW 3.0Si, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your 3.0Si functioning at its best. At Advance Auto Parts, we offer a wide selection of 9 Fuel and Emissions Systems for the 1976 BMW 3.0Si, designed to meet your needs without breaking the bank.
From
Air Flow Sensor
replacements to
Gas Caps
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1976 BMW 3.0Si at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $5.00 to $72.99, with
an average price of $26.84.
Our 9 Fuel and Emissions Systems in stock come from 5 trusted brands, so you’re sure to find the right part for your 1976 BMW 3.0Si without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1976 BMW 3.0Si, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like Carquest Premium, and more.
Carquest Premium Fuel and Emissions Systems
start at just $9.49 and boast an impressive 4 stars average rating from customers.
With 4 customer reviews and counting, our 1976 BMW 3.0Si Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1976 BMW 3.0Si is always ready to roll. We’re committed to providing you with everything you need to keep your 3.0Si in top shape, all in one place.
Start shopping confidently below for your 1976 BMW 3.0Si!
Best-Selling Air Flow Sensors for 1976 BMW 3.0Sis
Enhance the driving experience in your BMW with 1 quality Air Flow Sensor components, starting at $16.79.
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Most Popular 1976 BMW 3.0Si Gas Caps
Customize your BMW with 2 Gas Caps products
like Gas Caps, all
priced under $19.79.
Carquest Premium – Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10810)
from
$9.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Cap: 10582, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10582)
from
$19.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Top Picks for 1976 BMW 3.0Si Fuel Pumps
Upgrade BMW 3.0Sis with top-quality Fuel Pumps parts, including 1 OEM and aftermarket selections for your 1976 model.
Delphi – Electric Fuel Pump: With Bracket, Hose Clamps, Nut/Bolt, Rubber Hoses, Splices, Terminal Hardware (Part No.FD0037)
from
$72.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
In-Demand Fuel Injectors for 1976 BMW 3.0Sis
Select from 2 premium Fuel Injectors parts for your 1976 BMW 3.0Si, with prices ranging from $11.49 to $43.99.
Carquest Premium – Fuel Injector Seal Kit (Part No.AS010)
from
$11.49
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1125)
from
$43.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Most Sold 1976 BMW 3.0Si Fuel Tanks
Explore our best-selling BMW parts for the 1976 3.0Si among 2 OEM and aftermarket options starting from $5.00.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
VDO – Fuel Pump Tank Seal (Part No.E300462593VDO)
from
$5.00
Fuel Pump Tank Seal
Top-Rated Fuel and Emissions Systems Brands For Your 1976 BMW 3.0Si
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1976 BMW 3.0Sis. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 1976 3.0Si start at just $9.49 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 1976 BMW 3.0Si Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1976 BMW 3.0Si, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 1976 BMW 3.0Si. With over 4 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.49, with an average price of just $21.19. Plus, with over 4 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$9.49
$9.49
(3)
Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“But it works perfect and at a ⅓ of the price. Sweet”
FAQs for 1976 BMW 3.0Si Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 1976 BMW 3.0Sis?
Out of 9 Fuel and Emissions Systems that fit 1976 BMW 3.0Sis, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Fuel Injector Seal Kit (11450355) – $11.49
- Electric Fuel Pump: With Bracket, Hose Clamps, Nut/Bolt, Rubber Hoses, Splices, Terminal Hardware (11187698) – $72.99
What’s the price range for 1976 BMW 3.0Si Fuel and Emissions Systems?
Fuel and Emissions System prices for the 1976 BMW 3.0Si start at $5.00 and go up to $72.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 1976 BMW 3.0Si?
The average price for Fuel and Emissions Systems for the 1976 BMW 3.0Si is $26.84. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other BMW 3.0Si model years?
What are the cheapest Fuel and Emissions Systems for my 1976 BMW 3.0Si?
The cheapest 1976 BMW 3.0Si Fuel and Emissions Systems we carry in stock are:
- Fuel Pump Tank Seal (10809581) – $5.00
- Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (18481507) – $9.49
- Fuel Injector Seal Kit (11450355) – $11.49
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Multi-Purpose Wire Connector with Leads (11935200) – $16.79
What are the top-rated Fuel and Emissions Systems that fit the 1976 BMW 3.0Si?
Out of 4 reviews by customers, our 1976 BMW 3.0Si Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1976 BMW 3.0Si and their top-rated products:
- Gas Caps
- Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (18481507) – $9.49
- Locking Fuel Cap: 10582, Push In, Direct Fit, Provides Tight Seal, 1 Pack (18481468) – $19.79
What types of Fuel and Emissions Systems do you sell for my 1976 BMW 3.0Si?
As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1976 BMW 3.0Si:
Can I get help with 1976 BMW 3.0Si Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Fuel and Emissions Systems and more.
What is your return policy for BMW 3.0Si Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new BMW 3.0Si Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
