from

$8.30

Brake M/C Reservoir

from

$127.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$265.75

ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.

Product Features:

Original equipment (OE) quality
Wide range of single and tandem Brake Boosters
Unique tie-rod design meaning lighter and thinner parts for more efficient performance
Most units are made of steel, but lightweight aluminium versions are also available.

from

$15.99

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

Each unit is 100% new, providing consistent performance when servicing your brake system
Easy to transfer for on-the-spot master cylinder bleeding
Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
Easy to clean to ensure no cross contamination
Durability for long lasting performance

from

$31.49

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.
Plastic reservoirs are 100% vacuum-tested to ensure proper function

from

$55.99

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.
Plastic reservoirs are 100% vacuum-tested to ensure proper function

from

$41.49

This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:

Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
Strict specifications – made to meet rigorous SAE International standards

from

$51.05

The quality of ATE drums is characterized by the fact that we let the system competence from series production flow into their development. You can rely on a proven high quality standard applied worldwide. Close dimensional tolerances ensure a high degree of accuracy, for example. The cylindricity (deviation of friction surface diameter from the theoretical cylindrical ideal) is max. 5/100mm.

Product Features:

Manufactured to OE specifications Integrity to original design
The ATE drums are made exclusively of high-grade cast iron with a homogeneous microstructure.
Important functional dimensions are completely verified in production.
Optimum surface roughness and good thermal conductivity makes for stable friction coefficients.
The ATE drum permits problem-free fitting during installation.
Part number, coded batch number, and manufacturing date are stamped into the brake drum.
Fitting instructions are included.

from

$35.24

Parking Brake Cable

from

$16.99

This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
Quality design – inner cables are sheathed and lubricated to provide improved durability
Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
Tough materials – zinc-plated fittings prevent corrosion

from

$22.07

Parking Brake Cable

from

$2.99

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
New Brake Hardware prevents premature wear and maximizes performance
Helps deliver a quieter, more efficient braking system
Manufactured with quality materials to suppress high stress levels

from

$81.99

Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time

from

$96.99

Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.

Product Features:

Engineered to withstand 120 hours of salt spray testing
Zinc and aluminum anti-corrosion coating maintains a like-new appearance
Manufactured to exacting quality and dimensional specifications for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise
Brand may vary by location

from

$93.78

The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

Coat-Z protective anti-corrosion coating
Better wet braking performance by permanent expulsion of brake dust and water
Sporty look
Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
Noticeable improvement in the braking power of your car
Prevention of brake fade
Countersinking of holes doubles up as wear indicator
1:1 exchange of original disc possible
No additional adaption necessary
Not subject to registration: general ABE certification supplied with disc

from

$86.99

Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

Engineered to withstand 120 hours of salt spray testing
Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time

from

$32.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation

from

$21.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$46.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$11.99

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$17.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Wheel cylinders match what was originally installed on the vehicle.
Each cylinder matches OE for form, fit and function and material
Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
All bleeder screws are coated providing extra protection
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$36.99

Carquest Platinum Professional brake pads are a premium alternative to original equipment brake pads that provide superior stopping performance, quieter braking and cleaner wheels. All CQ Platinum Professional brake pads are manufactured by a vertically

Product Features:

Industry leading number of application specific formulations for maximum performance, extended pad life, and clean wheels
On-vehicle testing similar to original equipment tests
Patented 4-layer HEX shim Technology provides silent braking
Burnishing compound allows for a proper break-in of pads and rotors
Hardware and caliper pin grease included where required to complete the job

from

$43.99

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

Application-specific friction formulations provide shorter stopping distances and extended pad life
Hardware included for most applications, provides better value and
OE-designed slots and chamfers to reduce noise and vibration
Multi-layer shim provides near silent braking
Powder-coated backing plate prevents corrosion

from

$55.99

Specially developed for each application. Sourced from OE approved suppliers based on the specific application. For the enthusiast who wants to maintain the OE braking performance.

from

$47.99

The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium stainless-steel hardware for easy installation

from

$97.99

For over 25 years Hawk Performance has been producing premium friction products that stop you faster and last longer. Whether you are looking to cut seconds off of your track time, need additional stopping power for your large vehicle, want a product that is cleaner and quieter or, just don’t want to have to think about brakes and rotors, Hawk Performance has the products to keep you safer. We leverage our experience on the track and the technology used in aerospace and the military to make the best brake pads and rotors for all of your vehicle’s needs. Our extensive Research & Development department, including a PhD in friction and 23 dynamometers, allows us to produce first class products in the USA.

Product Features:

Smooth braking feel
Excellent for spirited driving
Gentle on rotors and extended pad life
Consistent brake release characteristics
Increased stopping power
All Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron/Metal rotors.

from

$23.79

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$70.99

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

Industry leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Wear sensors included on most European applications that require replacement
Powder-coated backing plate prevents corrosion