1975 Pontiac Catalina Ignition Coils and Boots
More 1975 Pontiac Catalina Ignition Coils and Boots
Find your specific 1975 Pontiac Catalina original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1975 Pontiac Catalina Ignition Coils and Boots
Carquest Premium – Ignition Coil Ground Strap (Part No.DLA1034)
from
$4.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed to meet or exceed OE specifications in form, fit and function
- Attaching hardware provided (where applicable)
E3 – High Output DiamondFIRE HEI Racing Coil (Part No.E3.623)
from
$65.99
The E3 HEI Coil in Cap features a superior design that works with aftermarket performance 4-pin modules and high performance electronic controls. The coil’s resistance and inductance values have been optimized to match the high amperage dwell circuits of performance ignition modules for faster charging and full coil saturation at higher RPM levels, translating into better performance. High temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring long service life. Specially designed to work with E3.1414 HEI Distributor.
Product Features:
See More
Product Features:
- Designed to with aftermarket 4-pin modules and high performance electronic controls
- High temperature epoxy provides excellent thermal conductivity and long life
- Maximum voltage of 48,000 volts
- Crosses to MSD 8225
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1521)
from
$16.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)
from
$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Driveworks – Ignition Coil (Part No.26189)
from
$35.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Carquest – Ignition Coil (Part No.E5)
from
$23.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured using high-quality materials to provide superior durability and long service life
- Designed and engineered to ensure precise performance
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)
from
$35.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)
from
$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$113.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8101)
from
$36.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – NGK Wire Set (Part No.51371)
from
$36.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Accel – 8Mm Super Stock Copper Uni (Part No.4038)
from
$72.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
Accel – GM Sb Hei 86-75 Under Vlv Cvr-Black (Part No.9018CK)
from
$175.99
Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions, ACCEL has the wire set for you. ACCEL Extreme 9000 Ceramic Boot Wires feature ultra high-temperature, double silicone, 8mm, 500 ohms/ft Ferro-Spiral core wire developed for performance use. The wire is rated at 600 degrees Fahrenheit peak and the black Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room or an application with high under-hood temps. ACCEL Extreme 9000 wires offer excellent energy delivery to the spark plugs through stainless steel spark plug terminals, while providing the highest level of RFI/EMI suppression.
Product Features:
See More
Product Features:
- Black Ceramic boots withstand up to 2,000░ Fahrenheit
- Black Ceramic boots withstand up to 2,000° Fahrenheit
- 8mm double silicone construction black wire rated at 600░ F rated
- 8mm double silicone construction black wire rated at 600° F rated
- 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
- Universal and custom fit applications
- Stainless Steel Plug Terminals
NGK – Spark Plug Wire Set: Ultra-low Resistance Magnetic Core, Lifetime Warranty (Part No.51379)
from
$22.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding over premium ferrite magnetic core delivers ultra-low resistance, a more powerful spark and excellent EMI/RFI noise suppression. OE or better specified spark plug and distributor boots ensure the highest quality fit, performance and durability in every application. Spark plug boots are glued to NGK cable with a silicone sealer for a watertight seal. Stainless steel terminals utilizing up to 3 serrated crimps bite into cable jacket and inner insulation for the highest terminal retention strength (wherever possible). Locking C-shaped spring clip with corrosion-resistant plating ensures a secure and positive spark plug terminal connection.
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)
from
$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
NGK – NGK Wire Set (Part No.51387)
from
$28.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8029)
from
$74.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Accel – GM Sb Hei 86-75 Under Vlv Cvr (Part No.9018C)
from
$181.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerance, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.
Product Features:
See More
Product Features:
- Ceramic boots withstand up to 2,000░ Fahrenheit
- Ceramic boots withstand up to 2,000° Fahrenheit
- 8mm double silicone construction black wire rated at 600░ F rated
- 8mm double silicone construction black wire rated at 600° F rated
- 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
- Universal and custom fit applications
- Universal And Custom Fit Applications
Carquest Premium – Distributor Connector (Part No.FAA1133)
from
$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Popular 1975 Pontiac Catalina Ignition Coils and Boots Categories
1975 Pontiac Catalina Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 1975 Pontiac Catalina. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 10 different Ignition Coils and Boots in our inventory ranging from $4.49 to $181.99. That means you can find the exact parts or products you need to keep that 1975 Pontiac Catalina running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1975 Pontiac Catalina. Carquest Premium, Carquest, and MSD Ignition are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 1975 Pontiac Catalina, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1975 Pontiac Catalina rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 1975 Pontiac Catalina Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 Pontiac Catalina demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Catalina the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular Carquest Ignition Coils and Boots
We carry Carquest parts in our stock across Ignition Coils categories, plus more. For a 1975 Pontiac Catalina, our most popular Carquest Ignition Coils and Boots include:
Top 1975 Pontiac Catalina Ignition Coils and Boots from Accel
Accel products are another trusted brand when it comes to Ignition Coils and Boots for your 1975 Pontiac Catalina. Popular Accel parts include:
FAQs for 1975 Pontiac Catalina Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 1975 Pontiac Catalina?
Out of 10 Ignition Coils and Boots for the 1975 Pontiac Catalina, the most popular in our inventory are:
from
$28.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
from
$48.99
(1)
Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit
Ignition Coil Boots
