1975 Oldsmobile Toronado Performance Engines
More 1975 Oldsmobile Toronado Performance Engines
Find your specific 1975 Oldsmobile Toronado original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1975 Oldsmobile Toronado Performance Engines
Edelbrock – Water Pump for Pontiac, Standard Rotation in Black Finish (Part No.88563)
from
$385.99
Edelbrock #88563 Water Pump Pontiac 389-455 standard rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooli
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 4.50 in. Block To Hub Height
- Black Finish
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
B & M – Tork Master 2400 (Part No.20404)
from
$339.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Tork Master 3000 (Part No.20402)
from
$499.99
Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
B & M – Holeshot 2400 (Part No.20412)
from
$499.99
HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
Mr. Gasket – Water Neck (Part No.2557)
from
$27.49
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with o-rings and mounting bolts
- Features an o-ring style seal to prevent water leaks
- Chrome plated
- 1/2″ NPT port can be used for various coolant temp related sensors or switches
Mr. Gasket – Water Neck (Part No.9714)
from
$35.49
Precision die-cast for a great fit, these water necks are first polished to a high luster, then beautifully chrome plated for lasting beauty. Comes with gasket and mounting bolts.
Product Features:
See More
Product Features:
- Prevents Water Leaks
- Precision Die Cast
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Edelbrock – Intake Manifold Gasket for 1965-76 400-425-455 Oldsmobile engines (Part No.7284)
from
$28.99
Product Features:
See More
- 1.44″x2.44″
- Features Embossed Silicone Bead Around The Intake Ports & Water Openings
- .060″ Thick
- Two Piece Configuration
- End Seals Not Included
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 4 Piece Set (Part No.1356)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Ultra Seal: Head Gasket (Part No.5788G)
from
$75.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.
Product Features:
See More
Product Features:
- Five layer (graphite core/perforated steel outer layers) composite construction
- Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
- Provides excellent stability, compressibility and high temperature endurance
- Coated with high temperature silicone to ensure sealing of engine fluids
- Will not brinell (indent) aluminum cylinder heads
- For high performance street, drag race and oval track use
- Compatible w/High Octane Fuel
- Compatible With Exotic Fuel
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1000)
from
$59.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Edelbrock – Cylinder Head Gasket Set for Oldsmobile (Part No.7340)
from
$58.99
Product Features:
See More
- 4.25 in. Cylinder Bore Diameter
- 0.042 in. Thickness
- 9.8cc Volume
- Gray Color
- Two Piece Configuration
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Oldsmobile (Part No.7373)
from
$123.99
Product Features:
See More
- Head: 4.250″ Bore/0.042″ Thick/9.8cc Vol.
- Intake: 1.44″x2.44″ Port/.060″ Thick
- Exhaust: 1.95″x1.56″ Port
- 3/16″ Valve Cover
- Multi Piece Configuration
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1155)
from
$76.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)
from
$64.19
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.
Product Features:
See More
Product Features:
- They Are Zinc Dichromate Plated Steel
- They Have Black Oxide Coated Set Screws
- Keeps Rocker Arms Positively Locked
- (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
- Includes Locks and Hex Wrench
- Shank O.D. .603″
Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5875)
from
$42.99
Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair, these gaskets are .187 inch thick.
Product Features:
See More
Product Features:
- Manufactured from high-density cork /rubber blend gasket material
- A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
- Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
- For OE replacement, high performance street, drag race and oval track
- .187″ thick
- Handles Ex Flange Pressure
- Forms Leak Proof Seal
- Black Latex Coating
Popular 1975 Oldsmobile Toronado Performance Engines Categories
1975 Oldsmobile Toronado Performance Engines
Maybe you’re in the middle of a full rebuild of that 1975 Oldsmobile Toronado. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 16 different Performance Engines in our inventory ranging from $26.99 to $825.99. That means you can find the exact parts or products you need to keep that 1975 Oldsmobile Toronado running smoothly.
Performance Engines are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1975 Oldsmobile Toronado. Mr. Gasket, Edelbrock, and FEL-PRO Performance are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1975 Oldsmobile Toronado, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 46 reviews in this category, some of the top rated parts include Water Pump for Pontiac, Standard Rotation in Black Finish with 5.0 stars.
So if you’re in the market for aftermarket Performance Engines to keep your 1975 Oldsmobile Toronado rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1975 Oldsmobile Toronado Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 Oldsmobile Toronado demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Toronado the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
Popular B & M Performance Engines
We carry B & M parts in our stock across Performance Torque Converters categories, plus more. For a 1975 Oldsmobile Toronado, our most popular B & M Performance Engines include:
Top 1975 Oldsmobile Toronado Performance Engines from Mr. Gasket
Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1975 Oldsmobile Toronado. Popular Mr. Gasket parts include:
from
$26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
FAQs for 1975 Oldsmobile Toronado Performance Engines
What are the most purchased Performance Engines for the 1975 Oldsmobile Toronado?
Out of 16 Performance Engines for the 1975 Oldsmobile Toronado, the most popular in our inventory are:
from
$28.99
This product is not rated
Intake Manifold Gasket for 1965-76 400-425-455 Oldsmobile engines
Performance Engine Intake Manifold Gaskets
What are the top-rated 1975 Oldsmobile Toronado Performance Engines?
Top-rated Performance Engines for your 1975 Oldsmobile Toronado based on customer reviews/ratings are:
