1975 Oldsmobile Cutlass Salon Engine Mounts
Keep Your 1975 Oldsmobile Cutlass Salon in Top Shape with a Quality Engine Mount
When it comes to maintaining or upgrading your 1975 Oldsmobile Cutlass Salon, choosing high-quality parts is crucial for ensuring your vehicle stays in top shape, whether you’re tackling a repair or enhancing performance. At Advance Auto Parts, we know how important it is to find the right Engine Mount for your Cutlass Salon. We currently carry a top Engine Mount in stock that is built to last. Whether you’re replacing a damaged Engine Mount or looking to upgrade, our selection for the 1975 Oldsmobile Cutlass Salon ensures you’ll find exactly what you need to keep your vehicle looking and performing its best.
Explore Related Parts
And while you’re here, don’t forget to check out related part categories like Engine Gaskets and Seals and Engine Timing Parts to complete your upgrade or repair project. At Advance Auto Parts, we’re proud to offer the parts and expertise to keep your 1975 Oldsmobile Cutlass Salon running smoothly and looking great.
Find Your Specific 1975 Oldsmobile Cutlass Salon Engine Mounts
Looking for the perfect Engine Mount for your 1975 Oldsmobile Cutlass Salon? You’re in the right place. Below, you’ll find a Engine Mount from a trusted manufacturer that is a perfect fit for your vehicle. At Advance Auto Parts, we offer only the highest quality OEM and aftermarket Engine Mounts, ensuring durability and a precise fit for your Oldsmobile Cutlass Salon. Whether you’re driving a 1975 model or another popular model year like
1976,
1977,
1978,
1979,
1980,
1985,
1986, and
1987, we’ve got you covered. Purchasing Engine Mounts from Advance Auto Parts is a smart choice, giving you access to trusted brands and parts built to perform. Below, you’ll find links to various types of Engine Mounts that fit your vehicle.
Essential 1975 Oldsmobile Cutlass Salon Engine Mounts
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2328)
from
$9.29
Anchor 2328 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1965-1990
- Weight approx: 2 Lbs
- Part Group: 2328, 2328
- Product: Made In The Usa
Hooker BlackHeart – Hooker BlackHeart Heavy Duty Clamshell Engine Mounts (Part No.71221004HKR)
from
$29.99
Product Features:
See More
- Can be used for a variety of GM vehicle applications and LS/LT swaps that utilize the common 2292 aftermarket mounts
- Heavy duty 11-gauge steel construction is over 50% thicker than common aftermarket mounts
- Dowels allow halves to be easily aligned
- No need to drill rivets from existing shell
- Durable powder coated finish
- For use with Hooker BlackHeart Polyurethane Inserts – P/N’s 71221014HKR (Black) or 71221015HKR (Red) – Sold Separately
- Sold individually (Consisting of one upper and one lower plate, Two required per vehicle)
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2292)
from
$13.49
Anchor 2292 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1968-2005
- Weight approx: 3 Lbs
- Product: Made In The Usa
- Design: Clamshell
- Part Group: 2292, 2292
Anchor – Engine Mount: Front Right, Front Left, 1 Piece (Part No.2384)
from
$11.99
Anchor 2384, This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1975-1987
- Weight approx: 3 Lbs
Energy Suspension – Motor and Transmission Mount (Part No.3.1130G)
from
$116.99
Product Features:
See More
- Re-Engineered to Handle High Horsepower
- Outlasts Rubber
- Virtually Indestructible
Energy Suspension – Motor Mount (Part No.3.1116R)
from
$43.49
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Hooker BlackHeart – Hooker BlackHeart Engine Mount Brackets (Part No.12643HKR)
from
$242.99
Product Features:
See More
- Specifically designed for bolt-in compatibility with the Hooker BlackHeart transmission swap components
- Fully compatible with Holley LS swap oil pan 302-2 and accessory drive brackets.
- Provides an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining usable U-joint working angles (especially in lowered vehicles)
- Mounting hardware included
Hooker BlackHeart – Hooker BlackHeart Engine Mount Thru Bolt Hardware Kit (Part No.71223015HKR)
from
$22.99
Product Features:
See More
- Can be used for aftermarket poly mounts or OEM rubber (Rubber Mounts are for GM 4th Gen F-Body)
- Class 10.9 for strength
- Zinc plated for corrosion resistance
- Includes 2 flange head bolts and 2 flange nuts
Energy Suspension – Motor Mount (Part No.3.1116G)
from
$43.49
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2382)
from
$15.99
Anchor 2382 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1977-1987
- Weight approx: 3 Lbs
Popular 1975 Oldsmobile Cutlass Salon Engine Mounts Categories
Most Popular Engine Mount for 1975 Oldsmobile Cutlass Salons
Enhance your 1975 Oldsmobile Cutlass Salon with this popular Engine Mount we have in stock, for $9.29.
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2328)
from
$9.29
Anchor 2328 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1965-1990
- Weight approx: 2 Lbs
- Part Group: 2328, 2328
- Product: Made In The Usa
FAQs for 1975 Oldsmobile Cutlass Salon Engine Mounts
What’s the price range for 1975 Oldsmobile Cutlass Salon Engine Mounts?
We currently have just one Engine Mounts for the 1975 Oldsmobile Cutlass Salon in stock: Engine Mount: Front Left, Front Right, 1 Piece and it costs $9.29.
Does Advance Auto Parts sell Engine Mounts for other Oldsmobile Cutlass Salon model years?
Does Advance Auto Parts sell Engine Mounts for any other 1975 Oldsmobile models?
Yes. We stock Engine Mounts for 8 other popular 1975 Oldsmobile models. Some of the most popular are 1975 Cutlass Engine Mounts, 1975 Cutlass Supreme Engine Mounts, 1975 98 Engine Mounts, 1975 Delta 88 Engine Mounts, and 1975 Toronado Engine Mounts.
What types of Engine Mounts do you sell for my 1975 Oldsmobile Cutlass Salon?
We currently have just 1 Engine Mount in stock for a 1975 Oldsmobile Cutlass Salon, and as of 3/1/26, it is an Engine Mount.
Can I get help with 1975 Oldsmobile Cutlass Salon Engine Mount orders?
Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Engine Mounts and more.
What is your return policy for Oldsmobile Cutlass Salon Engine Mounts?
Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Salon Engine Mounts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.