1975 Nissan 610 Ignition and Tune-Up Products
More 1975 Nissan 610 Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1975 Nissan 610, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1975 Nissan 610 Ignition and Tune-Up Products
Carquest Premium – Distributor Cap (Part No.CAC1331)
from
$29.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Bosch – Bosch Distributor Cap (Part No.F201013140BOS)
from
$15.26
Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.
Product Features:
See More
Product Features:
- Superior Surface Finish
- RFI Resistors (Asian) / RFI Suppression (European)
- Installation Screws
- Precision-machined Contacts
- Finely -tooled Metal Mounting Sleeve (Asian)
Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1944)
from
$22.99
Distributor Cap and Rotor Kit
NGK – Ignition Wire Set (Part No.F1020115986NGK)
from
$31.52
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$76.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
Accel – Super Stock Elect Coil Chrome (Part No.8145C)
from
$72.99
Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.
Product Features:
See More
Product Features:
- Engineered for higher energy output
- Improved throttle responce
- More high RPM power
- Chrome Plated
Driveworks – Ignition Coil (Part No.26189)
from
$35.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RN9YC (Part No.415)
from
$4.49
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
- Built to ISO and SAE standards for proven performance
NGK – OE Series Standard Nickel Spark Plug: Conventional Tip Design, BPR6ES-11 (Part No.7133)
from
$4.79
NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reli
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Champion – Iridium Spark Plug: Maximum Performance, OE Replacement, RN10WYPB5 (Part No.9007)
from
$8.29
Champion Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.
Product Features:
See More
Product Features:
- Champion Iridium – Maximum Performance. Premium Spark Plug
- Iridium center electrode delivers maximum life
- Fine-wire center electrode and V-trimmed for greater ignitability
- V-trimmed ground electrode promotes sharper spark focus
- Maintains stable operating temperature under all engine loads
- Heat-Active alloy allows electrodes to reach optimal temperature quickly
PerTronix – 1741 Ignitor Datsun 4 cyl (Part No.1741)
from
$132.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign
Product Features:
See More
Product Features:
- PerTronix 1741 Ignitor Datsun 4 cyl
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
Carquest Premium – Ignition Conversion Kit (Part No.CBA1235)
from
$215.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)
from
$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Intermotor Red Wire – Spark Plug Wire Set (Part No.53573)
from
$33.99
Premium Intermotor brand wire sets are designed to exactly replace the original equipment set. They feature conductors that match original equipment in material and resistance characteristics. Intermotor uses only the best in high temp jacketing and OE bo
Product Features:
See More
Product Features:
- Patented Hi-Gloss Clear Coat Formulation with Hi-temp Silicone Jacket. Enhances abrasion resistance while providing greater protection against severe temperatures
- Enhanced Wire Core Design matched to OE type – Low ohm, Ferrite mag, Wire wound, Silicone, or Metallic. Channels maximum voltage to spark plug and enhanced RFI protection for better overall performance
Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4237)
from
$31.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – Spark Plug Wire Set (Part No.8106)
from
$44.49
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Distributor Rotor (Part No.DAA1149)
from
$4.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Beck/Arnley – Ignition Rotor (Part No.173-1546)
from
$14.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Radio Frequency Interference (RFI) coating where applicable to minimize radio interference
- Premium material used to maximize rotor durability and helps restore ignition to original condition
- Constructed to withstand an engine environment
- Application specific for this vehicle
YEC – YEC Distributor Rotor (Part No.F202018361YEC)
from
$5.24
YEC Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.
Product Features:
See More
Product Features:
- Superior Surface Finish
- RFI Suppression
- Precision-machined Contacts
- Finely -tooled Metal Mounting Sleeve
Carquest Premium – Distributor Rotor (Part No.DAA1159)
from
$6.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
YEC – YEC Distributor Rotor (Part No.F202019074YEC)
from
$5.24
YEC Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.
Product Features:
See More
Product Features:
- Superior Surface Finish
- RFI Suppression
- Precision-machined Contacts
- Finely -tooled Metal Mounting Sleeve
Carquest – DISTRIBUTOR ROTOR (Part No.D559)
from
$5.05
Intermotor is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor is the import leader by design.
Product Features:
See More
Product Features:
- High dielectric-strength engineering polymer prevents breakdown or arcing and ensures long life
- Solid brass segment resists pitting and erosion for extended life
- Utilizes shaft retention clips for proper fit of distributor shaft
- As a global manufacturer of ignition products, we maintain complete quality control throughout the manufacturing process, from componentry to finished product
Forecast – Relay (Part No.P202089192FOR)
from
$42.98
Relay
Popular 1975 Nissan 610 Ignition and Tune-Up Products Categories
1975 Nissan 610 Ignition and Tune-Up Products
You count on your 1975 Nissan 610 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 41 Ignition and Tune-Up Products ranging in price from $2.49 to $215.99, you’re sure to find everything you need for your 1975 Nissan 610.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 17 different brands like NGK, E3, and ACDelco. 1975 Nissan 610 Ignition and Tune-Up Products start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 133 extensive product reviews on 1975 Nissan 610 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Ignition Coil with 4.5 stars and Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 4.9 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1975 Nissan 610 below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1975 Nissan 610
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Nissan 610 running right for years to come. In our inventory you’ll find brands like NGK, E3, ACDelco, and even more.
Popular ACDelco Ignition and Tune-Up Products
You’ll find popular ACDelco brand products across Spark Plugs. All are waiting to get your 1975 Nissan 610 back on the road. Some of the top-rated ACDelco products in these categories are:
Top-Rated NGK Ignition and Tune-Up Products
If NGK are what you’re looking for, our inventory holds plenty. We stock NGK brand Ignition and Tune-Up Products for your 1975 Nissan 610, and some of our most reviewed NGK parts include:
FAQs for 1975 Nissan 610 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1975 Nissan 610?
Out of 41 Ignition and Tune-Up Products for the 1975 Nissan 610, the most popular in our inventory are:
from
$6.79
This product is not rated
RAPIDFIRE Premium Platinum Tip Copper Core Spark Plug: Reduces Misfires & Enhances Durability
Spark Plugs
What are the top-rated 1975 Nissan 610 Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1975 Nissan 610 based on customer reviews/ratings are:
from
$3.49
(12)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“Replaced my old plug and generator fired right up. Excellent recommendation by the service desk. Thanks.”
from
$4.79
(5)
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, BPR6EY-11
“Purchased these plugs from Hinson’s Car Quest. They worked perfect. The staff was so much more friendly than other stores I go to. Will definitely be ”
