1975 GMC C35 Differentials

Essential 1975 GMC C35 Differentials

Yukon Gear – Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck (Part No.33405)

Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck

from

$89.99
Standard Open cross pin shaft for four pinion design for GM 14T.

Product Features:
  • Cross pin shaft
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – Bearing Race Driver (Part No.56009)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits 382A race
  • All steel construction
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)

Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles

from

$832.99
Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
  • Smooth design
  • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
See More

Powertrax – No-Slip Traction System (Part No.9207053000)

No-Slip Traction System

from

$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size (Part No.41029)

    Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size

    from

    $266.99
    Yukon forged replacement yoke for Dana 60, stronger than billet, with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Dana Spicer 60, 70, 70U and 70HD
    • 29 spline
    • 1350 u-joint size
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • Outside snap ring design
    • U-bolt style
    See More

    Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33050)

    10.5" GM 14 Bolt Truck Ring Gear Bolt

    from

    $11.99
    10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.

    Product Features:
    • Ring gear bolt for GM 10.5″ 14 bolt truck
    • 4.56 and up ratio
    • 1/2″ x 18 thread
    • 2.522″ overall length
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55063)

    Differential Cover Gasket

    from

    $6.79
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

    Dana 60 & Dana 70 Power Lok Case Bolt

    from

    $7.99
    Dana 60 & Dana 70 Power Lok case bolt.

    Product Features:
    • Power Lok case bolt for Dana Spicer 60 and 70
    • 7/16 x 14 thread
    • 3.5″ long
    • 9/16″ hex head
    See More

    Yukon Gear – Dana 70 & Dana 80 Pinion Gear Thrust Washer (Part No.33288)

    Dana 70 & Dana 80 Pinion Gear Thrust Washer

    from

    $7.99
    Dana 70 & Dana 80 pinion gear Thrust washer.

    Product Features:
    • Pinion gear thrust washer for Dana Spicer 70 and 80
    See More

    Yukon Gear – Crush Sleeve Eliminator Kit For GM 10.5" 14 Bolt Truck (Part No.55067)

    Crush Sleeve Eliminator Kit For GM 10.5" 14 Bolt Truck

    from

    $121.99
    Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck. This kit contains a solid spacer & shim kit to eliminate the crush sleeve and set pinion bearing preload.

    Product Features:
    • Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck
    See More

    Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

    Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5"

    from

    $304.99
    Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

    Product Features:
    • Clutch kit
    • Fits GM 10.5″ 14 bolt truck with Eaton positraction
    • Carbon fiber clutches
    See More

    Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

    Dana 60, Dana 70 & Dana 80 Cover Bolt

    from

    $5.99
    3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

    Product Features:
    • Cover bolt for Dana Spicer 60, 70 and 80
    • 3/8″
    See More

    Yukon Gear – Chrome Cover For 10.5" GM 14 Bolt Truck (Part No.32013)

    Chrome Cover For 10.5" GM 14 Bolt Truck

    from

    $59.99
    Chrome cover for GM 14T.

    Product Features:
    • Fits GM 10.5″ 14 bolt truck
    • Chrome
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1111)

    Differential Pinion Shim Kit

    from

    $13.99


    Product Features:
    • PINION SHIM – DANA 70 ALL
    See More

    Yukon Gear – Mini Spool For GM 10.5" 14 Bolt Truck (Part No.32301)

    Mini Spool For GM 10.5" 14 Bolt Truck

    from

    $287.99
    Yukon mini spool for GM 10.5″ 14 bolt truck.

    Product Features:
    • Fits 10.5″ GM 14 bolt truck
    • Provides 100% traction to both wheels at all times
    • Installs into standard open carrier case
    See More

    Yukon Gear – Pinion Install Kit For ’88 And Older 10.5" GM 14 Bolt Truck Differential (Part No.13058)

    Pinion Install Kit For '88 And Older 10.5" GM 14 Bolt Truck Differential

    from

    $349.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits 1988 and down GM 10.5″ 14 bolt truck
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R14RMKH)

    Differential Master Bearing Kit - Koyo

    from

    $163.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • GM 10.5 MASTER BRG & SEAL KIT 14BLT ’72-88, 410 & DOWN
    See More

    Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

    Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

    from

    $7.99
    Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

    Product Features:
    • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
    • 0.225″ diameter
    • 1.870″ long
    See More

    Motive Gear – Axle Shaft (Part No.MG1774)

    Axle Shaft

    from

    $168.99
    The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

    Product Features:
    • AXLE SHAFT 10.5″ 30 SPL. 37 9/16″ R.H.
    See More

    Pro-King – Differential Internal Nest Kit (Part No.744A717)

    Differential Internal Nest Kit

    from

    $323.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)

    Differential Cover Gasket

    from

    $8.79
    With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

    Product Features:
    • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
    See More

    Yukon Gear – Minor Install Kit For Dana 70-HD & Super-70 Differential (Part No.12028)

    Minor Install Kit For Dana 70-HD & Super-70 Differential

    from

    $169.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

    Product Features:
    • Fits Dana Spicer 70HD
    • Included are a pinion seal, complete shim kit, marking compound and brush.
    See More

    Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)

    Replacement Baffle For Dana 70 & 70HD

    from

    $7.99
    Product Features:
    • Oil baffle
    • Fits Dana Spicer 70 and 70HD
    See More

    FAG US – CUP (Part No.M802011)

    CUP

    from

    $15.29
    CUP

    Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    from

    $35.99
    Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

    Product Features:
    • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM10.5IK-2)

    Differential Gear Install Kit

    from

    $44.49
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Motive Gear – Differential Carrier Gear Kit (Part No.706058XR)

    Differential Carrier Gear Kit

    from

    $138.99


    Product Features:
    • KIT – INT. DANA 70 OPEN 35 SPL.
    See More

    Yukon Gear – Replacement Carrier Shim Kit For Dana 70 & 70HD (Part No.55019)

    Replacement Carrier Shim Kit For Dana 70 & 70HD

    from

    $126.99
    Product Features:
    • Carrier shim kit
    • Fits Dana Spicer 70 and 70HD
    See More

    1975 GMC C35 Differentials

    Maybe you’re in the middle of a full rebuild of that 1975 GMC C35. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 175 different Differentials in our inventory ranging from $1.89 to $1,566.99. That means you can find the exact parts or products you need to keep that 1975 GMC C35 running smoothly.

    Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1975 GMC C35. Valvoline, FELPRO, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1975 GMC C35, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 235 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 3.0 stars and Tapered Cone Wheel Bearing Assembly with 4.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1975 GMC C35 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1975 GMC C35 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 GMC C35 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C35 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    FAQs for 1975 GMC C35 Differentials

    What are the most purchased Differentials for the 1975 GMC C35?

    Out of 175 Differentials for the 1975 GMC C35, the most popular in our inventory are:
    Differential Cover Gasket
    from $6.79
    (13)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $23.99
    (7)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1975 GMC C35 Differentials?

    Top-rated Differentials for your 1975 GMC C35 based on customer reviews/ratings are:
    DIFFERENTIAL GASKET
    from $8.29
    (4)
    DIFFERENTIAL GASKET
    “Great Product”
    Tapered Cone Wheel Bearing Assembly
    from $16.99
    (2)
    Tapered Cone Wheel Bearing Assembly
    “Worked sell”
    Differential Cover Gasket
    from $15.99
    (1)
    Differential Cover Gasket
    “OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”