1975 GMC C25 Differentials

Essential 1975 GMC C25 Differentials

USA Standard Gear – Master Overhaul Kit for the ’88 and Older GM 10.5" 14T Differential (Part No.37044)

Master Overhaul Kit for the '88 and Older GM 10.5" 14T Differential

from

$349.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1988 and down GM 10.5″ 14 bolt truck
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Tapered Roller Bearing

from

$6.79
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down (Part No.20100)

Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down

from

$729.99
Product Features:
  • Standard open carrier case
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 and down ratio only
  • Does not include spider gears
See More

Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5"

from

$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:
  • Clutch kit
  • Fits GM 10.5″ 14 bolt truck with Eaton positraction
  • Carbon fiber clutches
See More

Motive Gear – Differential Pinion Nut (Part No.15994582)

Differential Pinion Nut

from

$17.99


Product Features:
  • NUT PINION – 14 BOLT
See More

Yukon Gear – Pinion Seal For GM 14T (Part No.30023)

Pinion Seal For GM 14T

from

$19.99
Pinion seal for GM 14T.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits 1998 and down GM 10.5″ 14 bolt truck
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For 10.5" GM 14 Bolt Truck In A 4.56 Ratio (Part No.24136)

High Performance Ring & Pinion Gear Set For 10.5" GM 14 Bolt Truck In A 4.56 Ratio

from

$449.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits GM 10.5″ GM 14 bolt truck
  • 10.50″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 4.56 ratio
See More

Yukon Gear – Mini Spool For GM 10.5" 14 Bolt Truck (Part No.32301)

Mini Spool For GM 10.5" 14 Bolt Truck

from

$287.99
Yukon mini spool for GM 10.5″ 14 bolt truck.

Product Features:
  • Fits 10.5″ GM 14 bolt truck
  • Provides 100% traction to both wheels at all times
  • Installs into standard open carrier case
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Pinion Depth Shims For 10.5" GM 14 Bolt Truck (Part No.55058)

Pinion Depth Shims For 10.5" GM 14 Bolt Truck

from

$37.99
14T GM pinion shim kit.

Product Features:
  • Pinion depth shims for GM 10.5″ 14 bolt truck
See More

Mr. Gasket – Differential Gasket (Part No.84B)

Differential Gasket

from

$18.09
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1964-1970 Chevrolet 8.2 inch 10 bolt & 1970-1981 GM 8.5 inch ring gear

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

14T Side Gear Thrust Washer

from

$7.99
14T side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Powertrax – Grip LS Traction System (Part No.LS231230)

Grip LS Traction System

from

$480.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – 14T Pinion Gear Thrust Washer (Part No.33384)

14T Pinion Gear Thrust Washer

from

$8.99
14T pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – Crush Sleeve Eliminator Kit For GM 10.5" 14 Bolt Truck (Part No.55067)

Crush Sleeve Eliminator Kit For GM 10.5" 14 Bolt Truck

from

$121.99
Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck. This kit contains a solid spacer & shim kit to eliminate the crush sleeve and set pinion bearing preload.

Product Features:
  • Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1018-1)

RngPnnInstlKt

from

$182.99
RngPnnInstlKt

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down

from

$1110.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 ratio and down only
  • Clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Motive Gear – Axle Shaft (Part No.MG1774)

Axle Shaft

from

$168.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:
  • AXLE SHAFT 10.5″ 30 SPL. 37 9/16″ R.H.
See More

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

DiffrlPinSupportBolt

from

$5.99
DiffrlPinSupportBolt

USA Standard Gear – Standard Spider Gear Set For GM 10.5" 14 Bolt Truck (Part No.39022)

Standard Spider Gear Set For GM 10.5" 14 Bolt Truck

from

$318.99
Product Features:
  • Spider gear kit
  • Fits GM 10.5″ 14 bolt truck open differential
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Yoke For GM 10.5" 14 Bolt Truck, 1410, Strap Style (Part No.41180)

Yoke For GM 10.5" 14 Bolt Truck, 1410, Strap Style

from

$299.99
Yukon yoke for GM 10.5″ 14 bolt truck, 1410, strap style. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 30 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Powertrax – No-Slip Traction System (Part No.9207883005)

No-Slip Traction System

from

$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33050)

    10.5" GM 14 Bolt Truck Ring Gear Bolt

    from

    $11.99
    10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.

    Product Features:
    • Ring gear bolt for GM 10.5″ 14 bolt truck
    • 4.56 and up ratio
    • 1/2″ x 18 thread
    • 2.522″ overall length
    See More

    National – Bearings (Part No.R-1581-TV)

    Bearings

    from

    $44.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • High radial load capacity makes them suitable for high speed applications
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck (Part No.33405)

    Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck

    from

    $89.99
    Standard Open cross pin shaft for four pinion design for GM 14T.

    Product Features:
    • Cross pin shaft
    • Fits GM 10.5″ 14 bolt truck
    See More

    Pro-King – Differential Internal Nest Kit (Part No.742J717)

    Differential Internal Nest Kit

    from

    $219.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Pro-King – Differential Pinion Bearing Retainer (Part No.744A965)

    Differential Pinion Bearing Retainer

    from

    $73.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Pinion Install Kit For ’88 And Older 10.5" GM 14 Bolt Truck Differential (Part No.13058)

    Pinion Install Kit For '88 And Older 10.5" GM 14 Bolt Truck Differential

    from

    $349.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits 1988 and down GM 10.5″ 14 bolt truck
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    1975 GMC C25 Differentials

    Maybe you’re in the middle of a full rebuild of that 1975 GMC C25. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 138 different Differentials in our inventory ranging from $0.91 to $1,566.99. That means you can find the exact parts or products you need to keep that 1975 GMC C25 running smoothly.

    Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1975 GMC C25. Valvoline, FELPRO, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1975 GMC C25, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 275 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 5.0 stars and Differential Carrier Shim Kit with 2.7 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1975 GMC C25 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1975 GMC C25 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 GMC C25 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C25 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Mr. Gasket Differentials

    We carry Mr. Gasket parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 1975 GMC C25, our most popular Mr. Gasket Differentials include:
    Differential Gasket
    from $18.09
    (1)
    Differential Gasket
    Rear Differential Cover Gaskets

    FAQs for 1975 GMC C25 Differentials

    What are the most purchased Differentials for the 1975 GMC C25?

    Out of 138 Differentials for the 1975 GMC C25, the most popular in our inventory are:
    Differential Cover Gasket
    from $6.79
    (13)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $23.99
    (7)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1975 GMC C25 Differentials?

    Top-rated Differentials for your 1975 GMC C25 based on customer reviews/ratings are:
    Differential Ring And Pinion
    from $350.99
    (7)
    Differential Ring And Pinion
    “Great spark plugs.”
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    “worked great”
    Differential Ring And Pinion
    from $350.99
    (2)
    Differential Ring And Pinion
    “I have a Chevy Impala 07 that runs on 3 cylinders when not needing the power of 6, and the new plugs have significantly provided an inexpensive tuneup”