1975 Dodge B100 Differentials

Essential 1975 Dodge B100 Differentials

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Replacement Crush Sleeve For Dana 60 (Part No.33089)

Replacement Crush Sleeve For Dana 60

from

$8.99
Replacement crush sleeve for Dana 60, APROX 0.660″ long.

Product Features:
  • Crush sleeve for Dana Spicer 60
  • 0.660″ tall
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Replacement Trail Repair Kit For Dana 60 With 1350 Size U/Joint And U-Bolts (Part No.32284)

Replacement Trail Repair Kit For Dana 60 With 1350 Size U/Joint And U-Bolts

from

$239.99
Yukon replacement trail repair kit for Dana 60 with 1350 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:
  • Fits Dana Spicer 60 and 70
  • 1350 u-joint size
  • Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker
See More

Yukon Gear – Steel Cover For Chrysler 9.25" Rear (Part No.32314)

Steel Cover For Chrysler 9.25" Rear

from

$93.99
Product Features:
  • Fits Chrysler 9.25″ rear
  • Steel
See More

Yukon Gear – Pinion Install Kit For ’70-’75 Chrysler 8.25" Differential (Part No.13003)

Pinion Install Kit For '70-'75 Chrysler 8.25" Differential

from

$175.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1975 and down Chrysler 8.25″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

O-Ring For Dana 60 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 60
See More

Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

Differential Side Bearing Screw Adjuster For 9.25" Chrysler

from

$64.99
Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:
  • Side adjuster for Chrysler 9.25″ rear
See More

Driveworks – Differential Pinion Seal (Part No.S-5126)

Differential Pinion Seal

from

$9.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)

9.25" Pinion Gear Thrust Washer

from

$12.99
9.25″ pinion gear thrust washer.

Product Features:
  • Pinion gear thrust washer for Chrysler 9.25″ rear
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Dorman – Help – Differential Plug, Rubber (Part No.65293)

Differential Plug, Rubber

from

$5.99
This differential cover plug is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

USA Standard Gear – Spartan Locker For Dana Spicer 60 With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17003)

Spartan Locker For Dana Spicer 60 With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18

from

$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
  • 1/2″ x 18 thread
See More

Yukon Gear – Set Up Bearing (Part No.56039)

Set Up Bearing

from

$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 60
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Powertrax – Lock Right Locker (Part No.1230-LR)

Lock Right Locker

from

$450.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    USA Standard Gear – Master Overhaul Kit for ’00 & Down Chrysler 9.25" Rear Differential. (Part No.37002)

    Master Overhaul Kit for '00 & Down Chrysler 9.25" Rear Differential.

    from

    $267.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits 2000 and down Chrysler 9.25″ rear
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    Pro-King – Differential Axle Bearing (Part No.742G280)

    Differential Axle Bearing

    from

    $16.79
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)

    Dana 60 & Dana 61 Tracloc Clutch Set

    from

    $269.99
    Dana 60 & Dana 61 TracLoc clutch set.

    Product Features:
    • Clutch kit
    • Fit Dana Spicer 60 Trac Loc positraction
    See More

    Yukon Gear – Bearing Race Driver (Part No.56011)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.

    Product Features:
    • Bearing race driver
    • Fits HM803110 race
    • All steel construction
    See More

    Yukon Gear – Standard Open Spider Gear Kit For ’96 And Older 8.25" Chrysler With 27 Spline Axles (Part No.16002)

    Standard Open Spider Gear Kit For '96 And Older 8.25" Chrysler With 27 Spline Axles

    from

    $301.99
    Yukon standard open spider gear kit for ’96 and older 8.25″ Chrysler with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Spider gear kit
    • Fit Chrysler 8.25″ open differntial with 27 spline axles
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

    Replacement Baffle For Dana 60 & Dana 70-U

    from

    $6.99
    Product Features:
    • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
    See More

    Yukon Gear – Model 35 (Standard Open & Tracloc) 8.25" Chrysler Tracloc Cross Pin Bolt (Part No.33230)

    Model 35 (Standard Open & Tracloc) 8.25" Chrysler Tracloc Cross Pin Bolt

    from

    $13.99
    Model 35 (standard Open & TracLoc) 8.25″ Chrysler TracLoc cross pin bolt.

    Product Features:
    • Cross pin bolt for AMC Model 35 with c-clip axles
    See More

    1975 Dodge B100 Differentials

    Maybe you’re in the middle of a full rebuild of that 1975 Dodge B100. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 295 different Differentials in our inventory ranging from $2.29 to $1,566.99. That means you can find the exact parts or products you need to keep that 1975 Dodge B100 running smoothly.

    Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1975 Dodge B100. FELPRO, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1975 Dodge B100, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 320 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 3.7 stars and Differential Pinion Shim Kit with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1975 Dodge B100 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1975 Dodge B100 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 Dodge B100 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your B100 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Dorman Differentials

    We carry Dorman parts in our stock across Differential Ring and Pinions categories, plus more. For a 1975 Dodge B100, our most popular Dorman Differentials include:
    Differential Ring And Pinion Set
    from $384.99
    (2)
    Differential Ring And Pinion Set
    Differential Ring and Pinions

    Top 1975 Dodge B100 Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1975 Dodge B100. Popular Felpro parts include:
    Differential Cover Gasket
    from $9.49
    (34)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    DIFFERENTIAL GASKET
    from $6.79
    (21)
    DIFFERENTIAL GASKET
    Rear Housing Cover Gaskets
    Differential Carrier Gasket
    from $6.49
    (1)
    Differential Carrier Gasket
    Automatic Transmission Differential Carrier Gaskets

    FAQs for 1975 Dodge B100 Differentials

    What are the most purchased Differentials for the 1975 Dodge B100?

    Out of 295 Differentials for the 1975 Dodge B100, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $23.99
    (7)
    Bearings
    Front Differential Pinion Bearings
    Ring Gear Bolt
    from $2.49
    This product is not rated
    Ring Gear Bolt
    Differential Ring Gear Bolts

    What are the top-rated 1975 Dodge B100 Differentials?

    Top-rated Differentials for your 1975 Dodge B100 based on customer reviews/ratings are:
    Differential Carrier Gear Kit
    from $219.99
    (6)
    Differential Carrier Gear Kit
    “Great customer service”
    Differential Pinion Shim Kit
    from $7.49
    (1)
    Differential Pinion Shim Kit
    “good product”
    Differential Crush Sleeve
    from $2.49
    (1)
    Differential Crush Sleeve
    “High quality, would buy again”