1975 Chevrolet Malibu Ignition and Tune-Up Products

Below you will find various in-demand Chevrolet Ignition and Tune-Up Products, components and accessories for your 1975 Malibu. Advance Auto Parts has popular Malibu parts like Distributors, Ignition Wires, Ignition Coils and Boots and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Malibu model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1975 Chevrolet Malibu Ignition and Tune-Up Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1975 Chevrolet Malibu Ignition and Tune-Up Products Categories

Standard Spark Plug Wires

Optional Spark Plug Wires

Ignition Conversion Kits

Distributor Cap Kits

Ignition Module and Controls

Distributor Rotor Buttons

Ignition Starter Switches

Distributor Small Parts

Spark Plug Non-Foulers

Distributor Vacuum Advances

Distributor Retainer

Ignition Triggers

Essential Ignition and Tune-Up Products for 1975 Chevrolet Malibus

from

$185.99

The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
Synchronized peak current and spark timing reduces heat build-up.
Senses startup and develops more energy for quicker, easier starting.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$30.49

GM Genuine Parts Ignition Starter are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Work with vehicle electronics to help optimize vehicle capabilities
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$8.99

When dressing up your engine, be sure not to miss a single detail. After installing a high-performance TSP distributor, hold it down with a color-matched billet aluminum clamp.

Product Features:

Material: Aluminum
Fastener Style: Stud
Hardware: Included

from

$10.99

ACDelco GM Original Equipment Double Platinum Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. ACDelco GM Original Equipment parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$614.99

The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:

Improved Combustion And Economy
Increased Spark Plug Life
Improved Cold Weather Starting
Maintenance Free Operation
Accurate Spark Timing
Self-Lubricating Bushings
Years Of Trouble-Free Service

from

$33.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$78.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$88.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$8.99

Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:

Product Features:

OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the spark plug boot
Design for direct compatibility
Multipack provides one time replace all COP for better deal

from

$32.49

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

from

$499.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

7 in. Diameter
Absolutely the most accurate way to trigger the ignition.
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.

from

$511.99

6.25 in. Diameter
Absolutely the most accurate way to trigger the ignition.
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.

from

$127.99

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

from

$64.99

An ACDelco Professional, premium aftermarket Ignition Control Module is a high quality replacement for many vehicles on the road today. It increases voltage in order for the spark plugs to ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Control Module features electronically welded lead connections to help reduce heat stress, failure, or cold joints. This ignition control module has been laser trimmed to provide precise values and reduce deterioration and damage. It includes a copper slug heat sink to help dissipate heat and create a more stable environment and also features a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. This premium aftermarket replacement ignition control module is manufactured to meet your expectations for fit, form, and function.

Product Features:

Feature electronically welded lead connections to reduce heat stress failure or cold joints
Laser trimmed to provide precise values and reduce deterioration and damage
Increase voltage in order for the spark plugs to ignite the air/fuel mixture
Include a copper slug heat sink to help dissipate heat and create a more stable environment
Equipped with a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs
Professional, premium aftermarket replacement
Manufactured to meet expectations for fit, form, and function to provide the performance and dependability you expect from ACDelco

from

$158.99

Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.

Product Features:

Custom fit for make and model listed.
Bolt-on performance
Wires are precut to exact specifications
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$47.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

from

$15.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$18.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$169.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$121.99

An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$4.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$3.29

Fel-Pro Oil Pan SnapUps 8mm bolts
Designed to hold up the pan and gasket, for one person installation
Engine$aver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$9.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$7.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$42.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

from

$19.49

ACDelco Professional Direct Ignition Coil Boots serve as the electrical connection between the coil and the spark plug. They act as insulators, helping keep moisture and contaminants out of the connection, and are a high quality replacement for many vehicles on the road today. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:

Weather tight boot seal helps protect from moisture intrusion
High temperature resistant silicone helps protect against thermal overload
Stainless steel internal spring with resistor suppresses RFI and helps deliver maximum voltage to the spark plug
Provides the performance and dependability you expect from ACDelco

from

$9.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.99

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 1975 Chevrolet Malibu with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1975 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 105 Ignition and Tune-Up Products for the 1975 Chevrolet Malibu, designed to meet your needs without breaking the bank. From Distributor replacements to Ignition Wires upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1975 Chevrolet Malibu at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $3.19 to $511.99, with an average price of $129.10. Our 105 Ignition and Tune-Up Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1975 Chevrolet Malibu without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 Chevrolet Malibu, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Autolite, MSD Ignition, Accel, and more. Autolite Ignition and Tune-Up Products start at just $4.29 and boast an impressive 4.6 stars average rating from customers. MSD Ignition and Accel also bring quality to the table, with Ignition and Tune-Up Products available starting at $47.49, and at an average 4.2 stars rating. With 2,060 customer reviews and counting, our 1975 Chevrolet Malibu Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals and more to make sure your 1975 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place. Start shopping confidently below for your 1975 Chevrolet Malibu!

Best-Selling Distributors for 1975 Chevrolet Malibus

Enhance the driving experience in your Chevrolet with 57 quality Distributor components, starting at $3.29.

show more show less

from

$3.29

Fel-Pro Oil Pan SnapUps 8mm bolts
Designed to hold up the pan and gasket, for one person installation
Engine$aver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$409.99

This is our most popular performance distributor! The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high RPM stability, a .500 In. steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSD’s adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application.

Product Features:

CNC machined billet aluminum housing and billet aluminum base
Will not accept a vacuum advance canister
Must Be Used w/An MSD Ignition Control
Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Mech. advance assem. can be locked out for crank trigger systems
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction
QPQ coated polished steel shaft; guided by sealed ball bearings

from

$50.99

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

Designed w/Performance In Mind
High Quality Material
Stainless Terminals
Performance replacement part

from

$47.49

ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Product Features:

Features Protection From Arc Thru And Crossfire
Features 60k V Rated Alkyd Compound
Brass Terminals Inserts And Steel Rotor Springs
High Spark Energy Flow

from

$129.99

Includes PN[84111/84101/84022]

from

$16.99

One of the best, and sometimes missed tuning tricks is not to just optimize your initial timing, but to bring in timing advance more quickly than the stock distributor can allow. Bringing timing more quickly than stock can provide substantial increases in both torque and horsepower depending on your combination.This is done by changing the springs under the cap. This kit includes three sets of springs which can be used in different combinations to provide full advance sooner than stock. Use lighter springs to bring the advance more quickly, and heavier springs to bring it in more slowly. Two new weights with nylon bushings are also included as are instructions to help with installation. Springs are color code as follows: Light Springs – Black Medium Springs – Silver Heavy Springs – Gold

Product Features:

Brings in timing more quickly than stock for more torque and horsepower
Includes three sets of springs to allow for a wider range of custom tuning
Instructions included to help with installation

from

$46.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$45.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$11.79

Add sparkle to your engine with this chromed hold-down clamp. With bolt and gasket. Serrations on the bottom prevent distributor and magneto rotation for accurate timing.

Product Features:

Rolled Edges For Strength
Ideal For Magnetos
Ideal For Ignition Distributor

from

$46.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$45.99

Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:

PerTronix D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors

from

$14.79

Replacement rotor for Chevrolet HEI style distributors.

Product Features:

For HEI distributors
Resist carbon tracking
Low resistance brass
Max voltage transfer
Molded from insulated material

from

$33.99

Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:

PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.

from

$55.99

PerTronix D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors

from

$40.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$56.99

Parts and accessories for Flame-Thrower Billet Distributors offer unmatched quality and accommodate the performance levels your distributor was engineered for.

Product Features:

Replacement distributor cap for Flame-Thrower distributors.
High dielectric strength cap
Caps for Flame-Thrower “Billet” distributors available with male or female brass terminals.

from

$40.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$40.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$53.99

All MSD extra duty distributor caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.

Product Features:

Update The GM Points Cap w/MSD Performance
High Quality; Voltage Insulating Material
Low Resistance
Performance replacement part

from

$48.99

Parts and accessories for Flame-Thrower Billet Distributors offer unmatched quality and accommodate the performance levels your distributor was engineered for.

Product Features:

Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
Replacement distributor cap for Flame-Thrower billet and cast distributors.
High dielectric strength cap
Replacement premium rotor with brass contact.

from

$33.99

With the introduction of our 20 Amp extreme HEI module, we needed an HEI cap and rotor that could withstand the high output. The answer was to mold our own HEI cap, rotor and coil cover. The cap and rotor will fit our HEI Pro-Billet distributor, PN 8365, plus will work on stock applications.

Product Features:

Extreme output rotor

from

$11.99

PerTronix D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit
These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.

from

$449.99

The street Pro-Billet is a popular route for people looking for proven race performance for their street cars. A vacuum advance canister provides economy and the proven MSD mechanical advance gives you the opportunity to dial-in a timing curve to fit your needs. Inside, an oversized steel shaft is QPQ coated for low friction and rides in a sealed ball bearing at the top of the distributor with an extra-long sintered bushing at the bottom. This combination keeps the shaft steady creating accurate spark delivery at any RPM. The street Pro-Billet relies on a magnetic pick-up to trigger the MSD Ignition control which delivers the powerful sparks to the coil. This pick-up is extremely accurate and never needs adjusting.

Product Features:

Designed for street/performance use w/mechanical or vacuum adv.
Must Be Used w/An MSD Ignition Control
Supplied w/An HEI Style Distributor Cap And Rotor
Accepts Cap-A-Dapts
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate

from

$56.99

Parts and accessories for Flame-Thrower Billet Distributors offer unmatched quality and accommodate the performance levels your distributor was engineered for.

Product Features:

Replacement distributor cap for Flame-Thrower distributors.
High dielectric strength cap
Caps for Flame-Thrower “Billet” distributors available with male or female brass terminals.

Most Popular 1975 Chevrolet Malibu Ignition Wires

Customize your Chevrolet with 13 Ignition Wires products like Standard Spark Plug Wires and Optional Spark Plug Wires, all priced under $180.99.

show more show less

from

$170.99

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$143.99

Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Distributor Cap – Boots and Terminals Included
Incl. Mini-Stripper-Crimper

from

$112.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$143.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$149.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$101.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$88.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$90.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$176.99

These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:

500 Ohms Per Foot Of Resistance
550░ F Rated Silicone Jacket
550° F Rated Silicone Jacket
Stainless Steel Plug Terminals
Custom-fit Universal And Import Coverage
Pre And Post HEI Vehicles
Silicone Spark Plug Boots

from

$180.99

The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:

150 Ohms/ft Of Resistance
600 F Rated Silicone Jacket
Stainless Steel Plug Terminals
Custom-fit Universal And Import Coverage
Pre And Post HEI Vehicles
Spiral-Wound Copper/Nickel Alloy

from

$78.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$78.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$89.99

For mounting on non-stock applications, for remote location. Choice of 4 core types. Female and male distributor towers. Terminal crimper and anvil tools. Includes silicone lube, boots and terminals. 20 piece kit.

Product Features:

300+Race- 8.8mm Black
For Race Engine Configurations
Stainless Steel Spark Plug Terminals
Suppression of EMI/RFI
600 Degree Double Silicone Construction
Spiral Wound Copper/Nickel Alloy
Fully Reactive Ferrite Material
150 Ohms Resistance

Top Picks for 1975 Chevrolet Malibu Ignition Coils and Boots

Upgrade Chevrolet Malibus with top-quality Ignition Coils and Boots parts, including 5 OEM and aftermarket selections for your 1975 model.

show more show less

from

$143.99

For engines with late-model type (HEI spark plug top) distributor caps. Multi-angle boots and terminals installed on one end. 90 degree distributor boots and terminals included.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Distributor Cap – Boots and Terminals Included
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes [8] 90 Degree Boots/Terminal Ends
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$125.99

HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

Product Features:

Direct performance replacement for GM HEI coil-in-cap dist.
70:1 Turns Ratio
Lower Primary Resistance Produces High Voltage Output
Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module

from

$77.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$158.99

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance

from

$41.49

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

In-Demand Spark Plugs for 1975 Chevrolet Malibus

Select from 14 premium Spark Plugs parts for your 1975 Chevrolet Malibu, with prices ranging from $3.19 to $12.99.

show more show less

from

$6.99

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
V-Groove Tip Design: The unique V-groove tip design enhances ignitability and overall engine performance.

from

$3.19

The Copper Plus spark plug is engineered for dependable performance and durability, making it a reliable choice for maintaining optimal engine function. Featuring a copper core center electrode, it delivers enhanced conductivity and precise heat control, ensuring good overall wear and extending the plug’s lifespan. Its nickel center electrode tip and tapered seat type further enhance reliability and engine performance. Built to ISO and SAE Standards, this spark plug guarantees proven performance and superior corrosion resistance, making it a durable option for long-term use. Designed as a standard replacement, it offers consistent functionality and compatibility with a wide range of vehicles. Whether you’re seeking improved heat management or reliable ignition, this spark plug is crafted to meet your needs with exceptional value.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the plug’s life.
Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and a tapered seat type, this spark plug ensures enhanced reliability and optimal engine performance.

from

$7.59

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.29

Autolite Copper spark plugs are designed to provide reliable performance and durability, making them an excellent choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are engineered for extended life, while the mid-projection design optimizes spark delivery. A high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, contributing to superior strength and reliability. The nickel-plated shell offers exceptional corrosion resistance, ensuring long-lasting durability even in demanding conditions. With a tapered seat type and integrated resistor, these spark plugs are built to meet performance expectations, delivering quick starts and the power your vehicle needs.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
The integrated resistor minimizes electrical interference, ensuring smoother engine performance and reliable ignition.

from

$4.99

Autolite Platinum spark plugs are crafted for superior performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, enhanced acceleration, and improved fuel efficiency. The platinum firing tip prevents gap erosion, extending the service life, while the high alumina ceramic insulator offers excellent thermal conductivity and insulation for added strength. A multi-rib insulator design prevents flash-over, ensuring reliable operation, and the nickel-plated shell resists corrosion for long-lasting durability. With a mid-projection standard center electrode and a tapered seat type, these performance-grade spark plugs deliver consistent results. The combination of platinum and nickel materials in the electrode tips further enhances reliability, making them a trusted choice for maintaining engine efficiency and longevity.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Incorporates a mid-projection standard center electrode design to ensure consistent performance and reliable engine operation.

from

$6.99

The Double Platinum Spark Plug is engineered for exceptional durability and performance, making it a top choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring a longer service life compared to copper and standard platinum plugs. Its yttrium-enhanced ground electrode delivers superior heat transfer, allowing it to withstand high temperatures and pressure for extended durability. The high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. With a mid-projection center electrode and tapered seat type, this performance-grade spark plug is designed to deliver consistent ignition and efficiency. Both the center and ground electrode tips are crafted from platinum, ensuring robust functionality and lasting value for your engine.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with a mid-projection center electrode and tapered seat type to ensure consistent ignition and improved engine efficiency.

from

$8.49

DiamondFire Automotive Spark Plug delivers exceptional performance and efficiency with its innovative Diamond Fire edge-to-edge ground electrode design. Engineered for smoother acceleration and idle, it ensures a faster, more complete burn of the fuel charge, maximizing pressure against the piston and putting more fuel to work. With power output improved by up to 6% on average, this spark plug enhances energy efficiency while reducing engine carbon deposits thanks to its patented Diamond Fire Technology. The unique diamond-shaped side wire electrode ignites the air/fuel mixture quickly, creating a larger flame kernel for optimal combustion. Crafted with durable nickel center and ground electrode tips, it offers long-lasting reliability. Pre-gapped at the factory for hassle-free installation, this tapered seat spark plug is a smart choice for drivers seeking improved fuel savings, cleaner engine performance, and enhanced power output.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

from

$8.49

The Premium DiamondFire Automotive Spark Plug is engineered for peak performance and efficiency, making it a standout choice for drivers seeking enhanced engine output. Featuring E3’s patented Diamond Fire edge-to-edge ground electrode, it delivers a faster, more complete burn for smoother acceleration and idle. The innovative “diamond-shaped” side wire electrode ensures quicker ignition of the air/fuel mixture, creating a larger flame kernel and improving power output by up to 6% on average. Its nickel center and ground electrode tips provide durability and reliable performance, while the tapered seat type ensures a secure fit. Pre-gapped at the factory for convenience, this spark plug also promotes cleaner combustion, reducing engine carbon deposits and contributing to fuel savings. Designed to maximize efficiency and power, its a smart upgrade for any vehicle.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

from

$6.99

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
Trapezoidal Cut Ground Electrode: Improves fuel efficiency, lowers emissions, and provides faster starts and quicker acceleration.
Economical Upgrade: Ideal for vehicles originally equipped with nickel alloy spark plugs, offering a cost-effective performance boost.
Enhanced Durability: Designed to last longer than traditional nickel spark plugs, reducing the need for frequent replacements.

from

$12.99

The Iridium Power Spark Plug (ITF16) is engineered for unmatched performance and efficiency, featuring the world’s smallest 0.4mm Iridium Center Electrode for enhanced spark and maximum combustion. Its patented 360-degree laser welding ensures durability, while the U-groove and taper-cut ground electrode optimize flame propagation for superior ignition. Built to withstand extreme temperatures exceeding 4000 Deg F, this spark plug is burnished with nickel plating for exceptional corrosion resistance and high-temperature endurance. Designed for a wide range of applications, including classic and collector cars, it delivers superior performance with more horsepower, quicker starts, and fewer misfires under heavy loads. The advanced iridium technology enhances fuel efficiency, making it a cost-effective choice, while its low voltage requirement ensures reliable ignition with reduced energy consumption. Whether you’re seeking maximum power or improved fuel economy, this spark plug is built to perform under the most demanding conditions.

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000 degree Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power
Superior Performance: Designed for maximum performance under extreme conditions, this spark plug delivers more horsepower, faster and easier starts, and fewer misfires under heavy loads.
Enhanced Fuel Efficiency: The advanced iridium technology of the DENSO Iridium Power spark plug contributes to better fuel efficiency, making it an economical choice for your vehicle.
Low Voltage Requirement: This spark plug requires 5,000 volts less to fire compared to conventional spark plugs, ensuring reliable ignition with lower energy consumption.

from

$9.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-enhanced alloy technology center electrode ensures superior wear resistance for extended performance life.

from

$12.99

The Iridium TT Spark Plug combines the durability of an OE-style plug with the power and torque of high-performance engineering. Featuring the world’s smallest 0.4mm Iridium Center Electrode, it maximizes firing potential while the 0.7mm Needle Tip Ground Electrode promotes higher spark energy and minimizes heat quenching. Built with DENSO’s patented Iridium-Rhodium alloy formula, it offers unmatched durability and withstands extreme temperatures exceeding 4000 Deg F. The advanced 360-degree laser welding process ensures a robust bond and structural integrity, while the Twin-Tip Technology, derived from OE Super Ignition Plug design, blends a fine wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for ultimate endurance. This spark plug delivers over 100,000 miles of reliable performance, enhanced fuel economy, and reduced emissions, making it an eco-friendly and cost-effective choice. With premium materials and a tapered seat type, the Iridium TT Spark Plug is engineered for optimal performance and long-lasting reliability.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT
Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
Premium Materials: Features an Iridium Center Electrode Tip and a Tapered Seat Type for optimal performance and durability.

from

$9.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

from

$7.49

Champion Double Platinum Power spark plugs are engineered to deliver exceptional performance and durability for your vehicle. Featuring a platinum fine-wire center electrode and a platinum pad ground electrode, these spark plugs ensure greater wear resistance and sharper spark focus, promoting reliable ignition under all conditions. The innovative Heat-Active alloy allows the electrodes to maintain optimal operating temperatures, even under varying engine loads, ensuring consistent performance. With a V-trimmed ground electrode design, these plugs enhance ignitability and provide a more powerful spark for improved engine efficiency. Designed as a standard replacement, they are built to meet or exceed OEM specifications, making them a dependable choice for maintaining your vehicle’s performance. Whether you’re looking for enhanced durability or stable operation, these spark plugs are a premium solution for long-lasting, high-quality ignition.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature

Most Sold 1975 Chevrolet Malibu Ignition Boots

Explore our best-selling Chevrolet parts for the 1975 Malibu among 7 OEM and aftermarket options starting from $80.99.

show more show less

from

$158.99

Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Incl. both socket-style and spark plug-style boots and terminals
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes [6] 90 Deg. Boots/Terminals
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$80.99

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$143.99

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$99.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$80.99

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$143.99

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Distributor Cap – Boots and Terminals Included
Incl. Mini-Stripper-Crimper

from

$119.99

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

Top-Rated Ignition and Tune-Up Products Brands For Your 1975 Chevrolet Malibu

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1975 Chevrolet Malibus. Below you’ll find some of our best rated Ignition and Tune-Up Products from Autolite, MSD Ignition, and Accel, and more. Ignition and Tune-Up Products from these brands that fit a 1975 Malibu start at just $4.29 and are rated as high as 4.6 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Autolite 1975 Chevrolet Malibu Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1975 Chevrolet Malibu, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Autolite ticks all of those boxes. We offer a wide selection of Autolite Ignition and Tune-Up Products, specifically designed for the 1975 Chevrolet Malibu. With over 3 Autolite brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.29, with an average price of just $5.42. Plus, with over 31 customer reviews and an average rating of 4.6 stars, you can trust that our Autolite Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $4.29

(16)

Copper Resistor Spark Plug: Quick Starts & Enhanced Durability

“Good product. Will buy again.”

from $6.99

(5)

Double Platinum Spark Plug: Enhanced Durability & Performance

“Way better than coppers”

from $4.99

(10)

Platinum Spark Plug: Improved Performance & Durability

“Perfect fit”

Popular MSD Ignition 1975 Chevrolet Malibu Ignition and Tune-Up Products

MSD Ignition auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1975 Chevrolet Malibu owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1975 Malibu, Advance Auto Parts carries a full inventory of 3 MSD Ignition Ignition and Tune-Up Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these MSD Ignition Ignition and Tune-Up Products range from $125.99 to $158.99, plus, with more than 6 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $125.99

(1)

High Energy Ignition Coil for GM HEI Distributors

“MSD ‘gets it’.”

from $158.99

(4)

Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI

“Use silicone spray to slide the boots over the wires ! The instructions say to use dielectric grease, I found this to be impossible.”

from $143.99

(1)

Wire Set; Super Conductor; Multi-Angle Plug; HEI Cap

“Excellent product,but set aside time to do the job correctly and neatly.”

FAQs for 1975 Chevrolet Malibu Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1975 Chevrolet Malibus?

Out of 105 Ignition and Tune-Up Products that fit 1975 Chevrolet Malibus, the following parts are the top sellers:

V-Power Nickel Spark Plug (UR4): Enhanced Ignitability & Performance (19650226) – $6.99
Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390079) – $4.29
Platinum Spark Plug: Improved Performance & Durability (5393817) – $4.99

What’s the price range for 1975 Chevrolet Malibu Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1975 Chevrolet Malibu start at $3.19 and go up to $511.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1975 Chevrolet Malibu?

The average price for Ignition and Tune-Up Products for the 1975 Chevrolet Malibu is $129.10. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Chevrolet Malibu model years?

Yes, we currently carry Ignition and Tune-Up Products for 42 model years of Chevrolet Malibus between 1964 and 2025. Ignition and Tune-Up Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Ignition and Tune-Up Products for my 1975 Chevrolet Malibu?

The cheapest 1975 Chevrolet Malibu Ignition and Tune-Up Products we carry in stock are:

Copper Plus Spark Plug (RV15YC4): Dependable Performance & Durability (5470004) – $3.19
Distributor Mounting Gasket (5785529) – $3.29
Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390079) – $4.29
Platinum Spark Plug: Improved Performance & Durability (5393817) – $4.99
V-Power Nickel Spark Plug (UR4): Enhanced Ignitability & Performance (19650226) – $6.99

What are the top-rated Ignition and Tune-Up Products that fit the 1975 Chevrolet Malibu?

Out of 2,060 reviews by customers, our 1975 Chevrolet Malibu Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1975 Chevrolet Malibu and their top-rated products:

Spark Plugs
- Copper Plus Spark Plug (RV15YC4): Dependable Performance & Durability (5470004) – $3.19
- Spark Plug Non-Foulers – 14mm Tapered Seat (5014980) – $7.59
- V-Power Nickel Spark Plug (UR4): Enhanced Ignitability & Performance (19650226) – $6.99
Ignition Switches
- Copper Plus Spark Plug (RV15YC4): Dependable Performance & Durability (5470004) – $3.19
- Spark Plug Non-Foulers – 14mm Tapered Seat (5014980) – $7.59
- V-Power Nickel Spark Plug (UR4): Enhanced Ignitability & Performance (19650226) – $6.99
Ignition Coils and Boots
- Copper Plus Spark Plug (RV15YC4): Dependable Performance & Durability (5470004) – $3.19
- Spark Plug Non-Foulers – 14mm Tapered Seat (5014980) – $7.59
- V-Power Nickel Spark Plug (UR4): Enhanced Ignitability & Performance (19650226) – $6.99

What types of Ignition and Tune-Up Products do you sell for my 1975 Chevrolet Malibu?

As of 3/1/26, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1975 Chevrolet Malibu:

Can I get help with 1975 Chevrolet Malibu Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Ignition and Tune-Up Products and more.

What is your return policy for Chevrolet Malibu Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1975 Chevrolet Malibu Ignition and Tune-Up Products

PerTronix – 91181 Ignitor II Adaptive Dwell Control Delco 8 cyl (Part No.91181)

GM Genuine Parts – Ignition Switch (Part No.23276089)

Top Street Performance – Silver Billet Aluminum Chevy V8 Distributor Hold Down Clamp (Part No.JM6926SL)

ACDelco – Double Platinum Spark Plug (Part No.41-902)

Mallory – Unilite Dist. Oldsmobile 330-455 (Part No.3763401)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1018)

PerTronix – 808412 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red (Part No.808412)

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7002)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 8 Leads (Part No.51355)

MSD Ignition – Crank Trigger Kit; Small Block Chevy (Part No.8610)

MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

Carquest Premium – New Ignition Modules (Part No.CBG1005)

ACDelco – Ignition Control Module (Part No.D1906)

MSD Ignition – Wire Set; Black Super Conductor; Big Block Chevy; HEI; 74-76 (Part No.31363)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 8 Leads (Part No.51373)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1786)

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1803)

NGK – Premium COP Rail Assy. Ignition Coil: Meets or Exceeds OE Specifications (Part No.48707)

GM Genuine Parts – Ignition Coil (Part No.D505A)

Felpro – Distributor Mounting Gasket (Part No.72343)

Felpro – Distributor Mounting Gasket (Part No.70194)

Carquest – Distributor Rotor (Part No.23A1006)

Carquest Premium – Distributor Rotor (Part No.DAA1004)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 6 Leads (Part No.51369)

ACDelco – Coil on Spark Plug Boot (Part No.16082)

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat (Part No.42000)

Felpro – Distributor Mounting Gasket (Part No.70194)

MSD Ignition – Distributor; Chevy V8; Pro-Billet; with Cap; Rotor (Part No.85551)

MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)

Accel – HEI Distributor Cap & Rotor Kit with Arc-Thru Protection (Part No.8122)

MSD Ignition – Cap and Rotor Kit; HEI; Extreme; includes PN 84111; 84101; 84022 (Part No.84023)

Mr. Gasket – Hei Advance Curve Kit (Part No.929G)

PerTronix – D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue (Part No.D4002)

PerTronix – D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black (Part No.D4000)

Mr. Gasket – Distributor Hold-Down Clamp (Part No.1009)

PerTronix – D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red (Part No.D4001)

PerTronix – D600700 Cap Black And Rotor 8 Cylinder Flame-Thrower Billet Distributor (Part No.D600700)

MSD Ignition – Rotor; GM HEI (Part No.8410)

PerTronix – D9006 Flame-Thrower Hei Distributor Adjustable Vacuum Advance Canister (Part No.D9006)

PerTronix – D600710 Cap Male Black And Rotor 8 Cylinder Flame-Thrower Billet Distributor (Part No.D600710)

PerTronix – D4051 Flame-Thrower HEI Distributor Cap Red (Part No.D4051)

PerTronix – D650710 Cap Male Black 8 Cylinder Flame-Thrower Billet Distributor (Part No.D650710)

PerTronix – D4050 Flame-Thrower HEI Distributor Cap Black (Part No.D4050)

PerTronix – D4052 Flame-Thrower HEI Distributor Cap Blue (Part No.D4052)

MSD Ignition – Distributor Cap; Alkyd; MSD Chevy V8 Distributor (Part No.8437)

PerTronix – D600701 Cap Red And Rotor 8 Cylinder Flame-Thrower Billet Distributor (Part No.D600701)

MSD Ignition – Rotor; Extreme Output; GM HEI (Part No.84101)

PerTronix – D9010 Flame-Thrower Hei Distributor Clockwise Vacuum Lockout Kit (Part No.D9010)

MSD Ignition – Distributor; Chevy V8; Billet with Vacuum Advance (Part No.8361)

PerTronix – D650711 Cap Male Red 8 Cylinder Flame-Thrower Billet Distributor (Part No.D650711)

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

MSD Ignition – Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug (Part No.31229)

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy 350; HEI (Part No.31359)

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

Accel – Universal Fit Spiral 8.8Mm Core Spark Plug Wire Set (Part No.8031)

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)

PerTronix – 808412 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red (Part No.808412)

PerTronix – 808311 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue (Part No.808311)

Accel – Universal Fit 300+ Race; Spark Plug Wire Set (Part No.7041)

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; HEI Cap (Part No.31189)

MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

MSD Ignition – Wire Set; Street Fire; 8-cyl.; HEI/90f; Universal (Part No.5552)

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; HEI (Part No.31353)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 8 Leads (Part No.51374)

NGK – V-Power Nickel Spark Plug (UR4): Enhanced Ignitability & Performance (Part No.6630)

Champion – Copper Plus Spark Plug (RV15YC4): Dependable Performance & Durability (Part No.18)

Dorman – Help – Spark Plug Non-Foulers – 14mm Tapered Seat (Part No.42006)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.26)

Autolite – Platinum Spark Plug: Improved Performance & Durability (Part No.AP26)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP26)

E3 – DiamondFIRE Automotive Spark Plug: More Power & Fuel Efficiency (Part No.E3.42)

E3 – DiamondFIRE Automotive Spark Plug: More Power & Fuel Efficiency (Part No.E3.40)

NGK – G-Power Platinum Spark Plug (UR4GP): Enhanced Durability & Efficiency (Part No.2869)