1975 Chevrolet Laguna Engine Parts

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 1975 Laguna. Advance Auto Parts has popular Laguna parts like Camshafts, Engine Mounts, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other Laguna model years including 1973, 1974, 1976 and more. Select a category of 1975 Chevrolet Laguna Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1975 Chevrolet Laguna Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Cylinder Head Gaskets

Engine Camshaft Bolts

Engine Oil Pump Pickup Tube and Screens

Rubber Freeze Plugs

Engine Dress Up Kits

Crankshaft Pulleys

Timing Cover Repair Sleeves

Valve Cover Load Spreaders

Main Bearing Repair Sleeves

Engine Valve Stem Seals

Camshafts

Camshaft Bearings

Push Rods

Camshaft and Lifter Kits

Camshaft Thrust Plate and Bearings

Rocker Arm Bolts

Fuel Pump Gaskets

Cylinder Head Alignment Dowel Pins

Engine Oil Pump Bushing

Camshaft Thrust Buttons

Cylinder Heads

Engine Valve Spring Seat

Engine Cylinder Head Nuts

Engine Timing Cover Bolt Sets

Engine Oil Deep Sump Kits

Engine Camshaft Bushings

Engine Bolt Kits

Essential Engine Parts for 1975 Chevrolet Lagunas

from

$226.99

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.

Product Features:

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.
262/270 Advertised Duration, 218/224 Duration @ .050″, .462″/.469″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$109.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$185.99

New Standard Replacement Engine Oil Pan, [Gasket Not Included]

Product Features:

Gasket Not Included
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$162.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$11.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Retro-fit performance
High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
Eliminates frequent lash adjustments
Significant friction reduction substantially increases horsepower and fuel economy
Delivers quieter engine operation
Application-specific design for perfect fit and correct operation

from

$10.99

Our Engine Oil Galley Plugs are available in multiple styles, including Cup Type, Pilot Seal, Reverse Taper, Concave, Quick-Seal® Rubber and Quick-Seal ® Copper.

Product Features:

Direct replacement – this engine oil galley plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$115.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$24.99

Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Product Features:

Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing
100% USA Made
Meets or exceeds OEM performance requirements
Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

from

$56.99

The Edelbrock #4449 Signature Series Valve Covers are designed for Chevrolet 262-400 ’59-86 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Small Block Chevy 262-400 1959-86
Short
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$15.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$219.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter “Z” Chain for Reduced Friction. “Z” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “Z” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$34.99

Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for

Product Features:

Stamped Steel Material
Comes W/ Front Crankshaft Seal Installed
W/ Welded Reinforcement Plate
Chrome Finish
Ideal For Preventing Camshaft Walk When Used W/ Thrust Button

from

$2.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$13.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$534.99

With a .625″ maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Product Features:

Seat pressure: 125 lbs. @ 1.800″, Open Pressure: 367 lbs. @ 1.150″
O.D.: 1.075″ (Top) 1.310″ (Bottom), I.D.: .650″ (Top) .885″ (Bottom)
Designed for hydraulic roller cams
.625″ maximum lift, 1.310″ O.D.
Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others

from

$100.99

Edelbrock Valve Spring Retainers are made of superior quality steel and are machined and heat treated for maximum strength. They feature a black oxide finish to prevent rust and corrosion

from

$24.99

Captured Needle Thrust Bearing. 0.150″ Thick.

Product Features:

0.150″ Thick
Captured Needle Thrust Bearing.

from

$215.99

This Mr. Gasket Deluxe Engine Bolt Kit includes chrome plated grade 5 hex head fasteners with AN type washers for the following: Intake Manifold, Timing Cover, Oil Pan, Fuel Pump, Water Neck, Long Water Pump and Headers. The AN washers have no exposed shoulder which offers a professional appearance.

Product Features:

Chrome plated
Grade 5
AN washers with no exposed shoulder for a professional appearance

from

$1296.00

Product Features:

Out-of-the-Box Bolt-On Performance
Designed For Street/High Performance Big Blocks
Specially Designed Oval Ports
Highly Efficient Semi-Open Style Chamber
High Velocity Short Intake Ports
Fit GM Mark IV; Gen V; and Gen VI Blocks
Complete Head with 2.19 (i) ; 1.88 (e) Valves
Also Available in Polished Finish; See PN[604519]

from

$20.99

Big Block Chevrolet tubular head dowel, .638/.639 inch o.d. (outer diameter) by 1/2 inch. Packaged two per set. These hard to find dowel pins are precision machined then case hardened for accurate alignment in engine assembly.

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$23.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$9.99

Spectre’s Valve Cover Spreader Bar Kits are designed to improve the seal between your valve cover and cylinder head. Constructed from high quality heavy gauge steel, the spreader bars help to evenly distribute clamping pressure, preventing leaks. Featuring a triple chrome-plated finish, this kit is designed to fit Chevrolet 265-400 Small Block engines.

Product Features:

Designed for Chevrolet 265-400 Small Block engines
Features a triple chrome-plated finish
Constructed from heavy gauge steel
Engineered to improve valve cover seal

from

$37.99

All Components are Heat-Treated Steel. Needle Roller Bearing for a Fully Rollerized Operation. 0.640″ Long, Used with Later Sheet Metal Covers.

Product Features:

All Components are Heat-Treated Steel
Needle Roller Bearing for a Fully Rollerized Operation
Used with Later Sheet Metal Covers.

from

$1.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$149.99

Includes: 2 short flat black valve covers 2 valve cover gaskets 1 flat black push-on breather 1 flat black dipstick & tube 1 flat black timing chain cover 1 flat black timing tab 1 rubber grommet for valve cover PCV hole 1 breather grommet

Product Features:

Ideal Starter Kit
Enhances Appearance

from

$3.29

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Upgrade your 1975 Chevrolet Laguna with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1975 Chevrolet Laguna, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Laguna functioning at its best. At Advance Auto Parts, we offer a wide selection of 346 Engine Parts for the 1975 Chevrolet Laguna, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1975 Chevrolet Laguna at great prices. Our Engine Parts inventory for this model ranges from just $1.99 to $1,745.99, with an average price of $212.80. Our 346 Engine Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 1975 Chevrolet Laguna without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 Chevrolet Laguna, we stock popular OEM and aftermarket Engine Parts from top names like Felpro, Edelbrock, National, and more. Felpro Engine Parts start at just $20.99 and boast an impressive 4.6 stars average rating from customers. Edelbrock and National also bring quality to the table, with Engine Parts available starting at $15.99, and at an average 4.4 stars rating. With 401 customer reviews and counting, our 1975 Chevrolet Laguna Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Alternators and Starters, Wipers and Related Products and more to make sure your 1975 Chevrolet Laguna is always ready to roll. We’re committed to providing you with everything you need to keep your Laguna in top shape, all in one place. Start shopping confidently below for your 1975 Chevrolet Laguna!

Best-Selling Camshafts for 1975 Chevrolet Lagunas

Enhance the driving experience in your Chevrolet with 70 quality Camshaft components, starting at $6.99.

show more show less

from

$21.49

Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.

Product Features:

Black oxide finished steel
Includes (3) grade 5 bolts & locking plate
Fits Chevrolet Small and Big Block without OE roller cam
Tabs bend up around bolt head to secure

from

$351.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$291.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$226.99

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.

Product Features:

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.
262/270 Advertised Duration, 218/224 Duration @ .050″, .462″/.469″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$254.99

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.

Product Features:

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
270/270 Advertised Duration, 224/224 Duration @ .050″, .470″/.470″ Lift, 110 Lobe Separation
Valve spring upgrade required
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$259.99

HYDRAULIC – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.

Product Features:

HYDRAULIC – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.
262/270 Advertised Duration, 218/224 Duration @ .050″, .504″/.510″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$14.99

Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.

Product Features:

Heat Treated Steel Bearing Race Material
Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
Prevents Wear On Engine Block
Can be Used to Repair a Damaged Engine Block Thrust Surface.

from

$1745.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$1270.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$1166.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$1166.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$1152.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$875.99

BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.

Product Features:

Cam and lifter kit for Big Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
279/296 Advertised Duration, 227/241 Duration @ .050″, .498″/.483″ Lift, 107 Lobe Separation
Valve spring upgrade required

XE Computer Controlled 224/230 Hydraulic Flat Cam SK-Kit Chevrolet Small Block

from

$652.99

XE Computer Controlled 224/230 Hydraulic Flat Cam SK-Kit Chevrolet Small Block

Magnum/Drag Race 253/253 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$652.99

Magnum/Drag Race 253/253 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$635.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$614.99

BIG BLOCK CHEVY HYDRAULIC COMPLETE KIT – Magnum: Great for street machines. Use headers and 9:1+ compression. In 396-402 use 2500+ stall and lower gears. Rough idle.

Product Features:

K-Kit includes cam, lifters, valve springs, valve locks, retainers, valve stem seals, timing set, assembly lube, instructions and decals
HYDRAULIC – Magnum: Great for street machines. Use headers and 9:1+ compression. In 396-402 use 2500+ stall and lower gears. Rough idle.
280/280 Advertised Duration, 230/230 Duration @ .050″, .520″/.520″ Lift, 110 Lobe Separation
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$596.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

Xtreme Energy 240/246 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$589.99

Xtreme Energy 240/246 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

Nostalgia Plus 229/236 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block

from

$579.99

Nostalgia Plus 229/236 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block

Xtreme Energy 244/252 Solid Flat Cam and Lifter Kit for Chevrolet Small Block

from

$578.99

Xtreme Energy 244/252 Solid Flat Cam and Lifter Kit for Chevrolet Small Block

Magnum/Mag-Marine 260/260 Solid Flat Cam/Lifter Kit Chevrolet Big Block 396-454

from

$578.99

Magnum/Mag-Marine 260/260 Solid Flat Cam/Lifter Kit Chevrolet Big Block 396-454

Magnum 236/236 Solid Flat Cam and Lifter Kit for Chevrolet Small Block

from

$578.99

Magnum 236/236 Solid Flat Cam and Lifter Kit for Chevrolet Small Block

Magnum 236/236 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block

from

$575.99

Magnum 236/236 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block

Most Popular 1975 Chevrolet Laguna Engine Mounts

Customize your Chevrolet with 1 Engine Mounts products like Engine Mounts, all priced under $13.49.

show more show less

from

$13.49

Anchor 2292 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1968-2005
Weight approx: 3 Lbs
Product: Made In The Usa
Design: Clamshell
Part Group: 2292, 2292

Top Picks for 1975 Chevrolet Laguna Valve Cover and Cylinder Heads

Upgrade Chevrolet Lagunas with top-quality Valve Cover and Cylinder Heads parts, including 98 OEM and aftermarket selections for your 1975 model.

show more show less

from

$64.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$217.99

These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed

Product Features:

Roller tip reduces friction while stiff design and superior ratio accuracy yield more effective valve lift
For applications with less than 350 lbs. of open spring pressure
Constructed from 8620 chromemoly steel, a superior material that will not flex and ensures maximum lift
Ultimate street roller rocker arm designed for serious performance enthusiasts

from

$433.99

The original Ultra-Gold Aluminum Rockers changed the way racing and high performance street engine builders approached valve train design. Now, COMP Cams is revolutionizing valve train performance again with the next generation of Ultra-Gold ARC Series Al

Product Features:

Precision-sorted trunnion bearings withstand valve spring pressure up to 700 lbs.
CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
Increase engine power, enhance valve train stability and improve oiling
Designed for high performance street and race engines
Arced channel & contoured top give the rockers the best strength to weight ratio possible

from

$18.99

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:

Fits Chevy V8
Standard Y Top 1/4 In-20 X 5/8 in L
Chrome Plated Steel
Overall Length: 4.64″
Installed Length: 4.00″
Pack of 4

from

$56.99

Small Block Chevy 262-400 1959-86
Short
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$9.99

Designed for Chevrolet 265-400 Small Block engines
Features a triple chrome-plated finish
Constructed from heavy gauge steel
Engineered to improve valve cover seal

from

$60.99

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.

Product Features:

3/8″ Diameter, 8.280″ intake length (qt. 8), 9.252″ exhaust length (qt.8) for Big Block Chevy 396-454, ’65-’86
Best choice when building street rods, RVs or daily drivers
Meet or exceed all OE pushrod specifications
Mate perfectly with High Energy and Magnum Rockers
Durable one-piece construction

from

$69.99

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$136.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 PSI Tensile Strength
High Performance Head Bolts Are Stronger

from

$98.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 PSI
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
.800″ Adjuster Thread Length
3/8-24 Shank Diameter and Thread
3/8″ Typical Small Block Application

from

$71.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket bore 4.100 inch, Compressed thickness 0.028 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use

from

$270.99

These High Energy Die Cast Aluminum Roller Rocker Arms for Chevy V8 396-454 applications are perfect for street and moderate race use. With a 7/16″ stud diameter and 1.7 ratio, the die cast, larger-than-stock body of the rocker arms is made of aluminum for superior strength with light overall weight. High Energy Die Cast Aluminum Roller Rocker Arms from COMP Cams are an affordable option that feature a die cast, aluminum body with a needle bearing fulcrum and roller tip. Designed to be stiffer and more durable, these cost effective rocker arms are capable of providing added valve lift while withstanding the rigors of a performance application. Their specially engineered fulcrum and roller tip create far less friction than sliding factory models to lower oil temperatures, thus improving both response and horsepower. Snap rings are used to hold the trunion and bearings locked in place.

Product Features:

Cost effective aluminum construction provides superior strength to weight ratio
Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
Durable design increases valve lift while withstanding the rigors of moderate race use
Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.

from

$197.99

Product Features:

Case-Hardened Tubing
Surface Hardening
Welded Ends
0.3125 in. Diameter
Use with or without Hardened Steel Guideplates

from

$136.99

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 PSI Tensile Strength
High Performance Head Bolts Are Stronger

from

$109.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$209.99

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 Psi Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$101.99

Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:

(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Shank O.D. .540″
Includes Locks and Hex Wrench
High-Quality Grade Steel
Heat-Treated For Ex Strength
Plated With Durable Gold Tone Finish

from

$1251.99

Product Features:

Complete Single For Flat Tappet
100cc Combustion Chamber Volume
290cc Intake/110cc Exhaust Runner Volume
2.19 in. Intake/1.88 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$1065.99

Product Features:

50-State Street Legal Aluminum Cylinder Head
Out-of-the-Box Bolt-On Performance
70cc Combustion Chambers Improve Performance
Retain Stock Compression Ratio

from

$704.99

ENGINE ROCKER ARM

from

$649.99

ROCKERS, CB 1.75 7/1

from

$649.99

ENGINE ROCKER ARM

7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring

from

$636.99

7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring

10 Degree Steel Retainer Set of 100 for 983 Spring

from

$634.99

10 Degree Steel Retainer Set of 100 for 983 Spring

In-Demand Engine Gaskets and Seals for 1975 Chevrolet Lagunas

Select from 11 premium Engine Gaskets and Seals parts for your 1975 Chevrolet Laguna, with prices ranging from $1.99 to $445.99.

show more show less

from

$30.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .187 inch thick. Fits Chevrolet 262,265,267,283,307,327,350,400 Gen I Small Block with Perimeter Bolt Valve Covers.

Product Features:

Provides Excellent Flange Sealing And Durability
For High-perf. Street Drag Race Oval Track

from

$44.99

Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are an extra thick .312 inch which can help with valvetrain clearance.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
An extra thick .312″ which can help with valvetrain clearance

from

$32.49

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track use

from

$37.99

Product Features:

Valve Cover Gasket

from

$43.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .312 inch thick. That’s substantially thicker than stock which can allow for additional valve train clearance. brbrFits Chevrolet 262,265,267,283,307,327,350,400 Gen I Small Block with Perimeter Bolt Valve Covers.

Product Features:

Provides Excellent Flange Sealing And Durability
For High-Performance Street, Drag Race & Oval Track Use

from

$32.49

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
.187″ thick

from

$49.99

This Mr. Gasket Rear Main Seal is made from Viton&reg: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. Its durability and it’s double, offset lip seal design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.

Product Features:

Repairs That Leaky Rear Main Sail
Viton« Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
Viton® Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals

Lifter Bore Grooving Kit with .842" and .875" Tools

from

$445.99

Lifter Bore Grooving Kit with .842" and .875" Tools

from

$168.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$114.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$1.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Most Sold 1975 Chevrolet Laguna Engine Timing Parts

Explore our best-selling Chevrolet parts for the 1975 Laguna among 126 OEM and aftermarket options starting from $5.99.

show more show less

from

$18.79

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$15.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$39.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
50 State Street Legal
Not for OEM Hydraulic Roller-Lifter Camshaft Eng.

from

$45.49

Mr. Gasket Timing Cover Kit is the finishing touch to dressing up your engine. This kit is for use with original equipment style timing chains only. Double roller type chains or gear drives require checking for adequate clearance. This kit includes everything you need, including the timing cover, bolts, front oil pan seal, front seal and water pump gaskets.

Product Features:

Fits Chevy Small Block 1955-1995
For Use With OEM Style Timing Chain Only
Chrome Plated Steel

from

$66.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
Not for OEM Hydraulic Roller-Lifter Camshaft Eng.

from

$5.99

Spectre’s Timing Tab Adjustable Small Block Chevy is a universal timing tab that has an adjustable pointer for accurate readings and works with any size harmonic balancer. Featuring triple chrome plated steel construction, the timing tab fits small block Chevrolet 265-400.

Product Features:

Chrome plated
Steel construction
For any size harmonic balancer
Designed to fit Chevy small block engines

from

$31.49

Timing Set includes all components for a quick and efficient replacement.

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$22.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$27.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S390T Engine Timing Camshaft Sprocket (1 EA), S391 Engine Timing Crankshaft Sprocket (1 EA), C499 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$44.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: C163 Engine Timing Chain (1 EA), S289 Engine Timing Crankshaft Sprocket (1 EA), S288 Engine Timing Camshaft Sprocket (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$36.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: C163 Engine Timing Chain (1 EA), S289 Engine Timing Crankshaft Sprocket (1 EA), S288 Engine Timing Camshaft Sprocket (1 EA).

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$49.99

Steel Cam Sprocket. Heat-Treated Crank Sprocket With Three Keyways. True Roller Chain With .250 Diameter. 100% USA.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$78.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets

from

$25.99

Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:

6 3¿4″ diameter
6 3┐4″ diameter
305, 350 cu. in. 1969-93
Increased Performance
Set Valve Lash At Proper Time

from

$24.99

Street Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life. USA Made.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$19.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$8.49

Installs using stock timing cover bolts. Chrome plated steel is a much better compliment to a chromed timing cover. Has markings from 14 degrees before top dead center (BTDC) to 8 degrees after top dead center (ATDC).

Product Features:

Bolts on with existing timing cover bolts
Chrome plated steel is a much better compliment for chrome timing covers
Markings for 14 degrees BTDC to 8 degrees ATDC

from

$15.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$12.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$11.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$138.99

Billet Crank Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Sprockets Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$99.99

Billet Camshaft Sprocket for Superior Street Performance. Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 100% USA Made

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$102.99

Billet Camshaft Sprocket for Superior Street Performance. Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Bronze Thrust Washer to Minimize Block Thrust Surface Friction. 100% USA Made

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

Top-Rated Engine Parts Brands For Your 1975 Chevrolet Laguna

Shop for the best-rated brands offering Engine Parts and other products for your 1975 Chevrolet Lagunas. Below you’ll find some of our best rated Engine Parts from Felpro, Edelbrock, and National, and more. Engine Parts from these brands that fit a 1975 Laguna start at just $15.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 1975 Chevrolet Laguna Engine Parts

When it comes to maintaining or upgrading your 1975 Chevrolet Laguna, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 1975 Chevrolet Laguna. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $20.99, with an average price of just $34.99. Plus, with over 9 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $56.99

(5)

Engine Gasket Set

“quality parts ,great price”

from $20.99

(3)

Engine Crankshaft Seal Kit

“Fit perfect, no leaks.”

from $26.99

(1)

Engine Crankshaft Seal Kit

“Easy to replace and fit perfectly on the 454, I highly recommend.”

Popular Edelbrock 1975 Chevrolet Laguna Engine Parts

Edelbrock auto parts is one of the highest quality Engine Part brands in the market. Any 1975 Chevrolet Laguna owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1975 Laguna, Advance Auto Parts carries a full inventory of 3 Edelbrock Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Edelbrock Engine Parts range from $39.99 to $351.99, plus, with more than 4 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $64.99

(2)

Sure Seat Valve Springs for Chevy 262-400 V8 1957-95

“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”

from $39.99

(1)

Performer-Link Adjustable True-Roller Timing Chain Set

“When you search for ls timing chain advance pays to be top ad that pops up. Says in the headline true-roller. Yet the first question is why isn’t it s”

from $351.99

(1)

Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet

“put this cam and lifter kit in my 412 inch small block chevy. works well with patriot alum. heads and edelbrock duel quad intake. all this is running ”

FAQs for 1975 Chevrolet Laguna Engine Parts

Which Engine Parts are best-sellers for 1975 Chevrolet Lagunas?

Out of 346 Engine Parts that fit 1975 Chevrolet Lagunas, the following parts are the top sellers:

Multi-Purpose Seal (3271684) – $17.99
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (5701295) – $9.49
Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (18481405) – $6.99

What’s the price range for 1975 Chevrolet Laguna Engine Parts?

Engine Part prices for the 1975 Chevrolet Laguna start at $1.99 and go up to $1,745.99 for the most premium parts.

What’s the average price of a Engine Part for a 1975 Chevrolet Laguna?

The average price for Engine Parts for the 1975 Chevrolet Laguna is $212.80. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Laguna model years?

Yes, we currently carry Engine Parts for 2 model years of Chevrolet Lagunas between 1973 and 1976. Engine Parts are bought most frequently for the following model years: 1976, 1974, and 1973.

What are the cheapest Engine Parts for my 1975 Chevrolet Laguna?

The cheapest 1975 Chevrolet Laguna Engine Parts we carry in stock are:

Fuel Pump Gasket (10509522) – $1.99
Engine Oil Pump Shaft Retainer (5991552) – $3.29
Timing Tab Adjustable Bb Chevy (22905697) – $5.99
Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (22140133) – $5.99
Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (18481405) – $6.99

What are the top-rated Engine Parts that fit the 1975 Chevrolet Laguna?

Out of 401 reviews by customers, our 1975 Chevrolet Laguna Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1975 Chevrolet Laguna and their top-rated products:

Engine Gaskets and Seals
- High Performance Valve Cover Gasket Set for Street, Drag, and Oval Track (5021847) – $30.99
- Valve Cover Gasket Set (17360226) – $32.49
- Ultra Seal: Valve Cover Gasket Set (17360336) – $44.99
Valve Cover and Cylinder Heads
- High Performance Valve Cover Gasket Set for Street, Drag, and Oval Track (5021847) – $30.99
- Valve Cover Gasket Set (17360226) – $32.49
- Ultra Seal: Valve Cover Gasket Set (17360336) – $44.99
Engine Kits
- High Performance Valve Cover Gasket Set for Street, Drag, and Oval Track (5021847) – $30.99
- Valve Cover Gasket Set (17360226) – $32.49
- Ultra Seal: Valve Cover Gasket Set (17360336) – $44.99

What types of Engine Parts do you sell for my 1975 Chevrolet Laguna?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1975 Chevrolet Laguna:

Can I get help with 1975 Chevrolet Laguna Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Laguna Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Laguna Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1975 Chevrolet Laguna Engine Parts

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.12-238-2)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

KAI – Engine Oil Pan (Part No.SPIGMP08A)

Felpro – Engine Gasket Set (Part No.260-1000AT)

Sealed Power – Engine Valve Lifter (Part No.HT-817R)

Dorman – Rubber Expansion Plug 1-3/4 In. – Size Range 1-3/4 In. – 1-7/8 In. (Part No.02605)

Sealed Power – Engine Gasket Set (Part No.260-1081)

Cloyes Performance – Engine Camshaft Bushing (Part No.P9005)

Edelbrock – Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel (Part No.4449)

National – Multi-Purpose Seal (Part No.3945)

Cloyes Performance – High Performance Timing Set (Part No.9-3646BTX3Z)

Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)

Sealed Power – Engine Push Rod (Part No.RP-3254)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S395)

Competition Cams – VALVE SPRINGS, 1.310" BEEHIVE 1 ST (Part No.26918-16)

Edelbrock – Performer Series Retainer (Qty: 16) (Part No.9602)

Cloyes Performance – Engine Camshaft Sprocket Thrust Bearing (Part No.9-220)

Mr. Gasket – Complete Engine Bolt Kit (Part No.5001)

Edelbrock – RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Flat Tappet Cam (Part No.60459)

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4377)

Victor Reinz – Engine Crankshaft Seal Kit (Part No.19-10111-01)

Spectre – Valve Cover Clamps SB (Part No.5321)

Cloyes Performance – Engine Camshaft Thrust Button (Part No.9-202)

MAHLE Original – Fuel Pump Gasket (Part No.D27094)

Mr. Gasket – Engine Dress-Up Kit (Part No.9834BP)

Felpro – Engine Oil Pump Shaft Retainer (Part No.72665)

Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)

Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2103)

Competition Cams – Magnum 253/253 Hydraulic Flat Cam (Part No.11-214-4)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.12-238-2)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.12-211-2)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.11-238-3)

Cloyes Performance – Engine Camshaft Thrust Washer (Part No.9-203)

Competition Cams – Thumpr 227/241 Hydraulic Roller Cam K-Kit (Part No.K12-600-8)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit (Part No.K11-202-3)

Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Roller Cam/Lifter Kit (Part No.CL11-602-8)

Competition Cams – Thumpr 227/241 Hydraulic Roller Cam and Lifter Kit (Part No.CL11-600-8)

Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-601-8)

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL11-600-4)

Competition Cams – XE Computer Controlled 224/230 Hydraulic Flat Cam SK-Kit Chevrolet Small Block (Part No.SK12-268-4)

Competition Cams – Magnum/Drag Race 253/253 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block (Part No.SK12-214-4)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-202-3)

Competition Cams – Magnum 230/230 Hydraulic Flat Cam K-Kit (Part No.K11-208-3)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-203-3)

Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block (Part No.SK12-250-3)

Competition Cams – Nostalgia Plus 229/236 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block (Part No.CL12-671-4)

Competition Cams – Xtreme Energy 244/252 Solid Flat Cam and Lifter Kit for Chevrolet Small Block (Part No.CL12-678-4)

Competition Cams – Magnum/Mag-Marine 260/260 Solid Flat Cam/Lifter Kit Chevrolet Big Block 396-454 (Part No.CL11-220-4)

Competition Cams – Magnum 236/236 Solid Flat Cam and Lifter Kit for Chevrolet Small Block (Part No.CL12-223-4)

Competition Cams – Magnum 236/236 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block (Part No.CL12-326-4)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2292)

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Competition Cams – MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST (Part No.1412-16)

Competition Cams – ALUMINUM GOLD ROCKER ARMS, SBC 1 ST (Part No.19001-16)

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Edelbrock – Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel (Part No.4449)

Spectre – Valve Cover Clamps SB (Part No.5321)

Competition Cams – PUSHRODS, BBC HIGH ENERGY INT & EXH 1 ST (Part No.7854-16)

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

ARP Auto Racing – Hex Style Head, 1.8L Lb Per Square" Tensile Strength, Black Oxide, Chrome Moly (Part No.135-3601)

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

Mr. Gasket – Head Gasket (Part No.1134G)

Competition Cams – Rocker Arms, Die Cast Alum Big Block Chevy 1.7 1 St (Part No.17021-16)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Edelbrock – Performer Big-Block Chevy Oval Port Hydraulic Flat Tappet Cam (Part No.60499)

Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60759)

Competition Cams – ENGINE ROCKER ARM (Part No.1808-16)

Competition Cams – ROCKERS, CB 1.75 7/1 (Part No.1827-16)

Competition Cams – ENGINE ROCKER ARM (Part No.1805-16)

Competition Cams – 7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-100)

Competition Cams – 10 Degree Steel Retainer Set of 100 for 983 Spring (Part No.751-100)

Mr. Gasket – High Performance Valve Cover Gasket Set for Street, Drag, and Oval Track (Part No.175)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5861)

Mr. Gasket – Valve Cover Gasket Set (Part No.177)

Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)