1975 Chevrolet K20 Drivetrains

Essential 1975 Chevrolet K20 Drivetrains

Yukon Gear – Pinion Install Kit For GM 8.5" Front Differential (Part No.13070)

Pinion Install Kit For GM 8.5" Front Differential

from

$173.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.5″ front
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P

from

$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:
  • Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
  • Left hand thread
See More

Driveworks – Needle Bearing (Part No.S-B-2110)

Needle Bearing

from

$7.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Pro-King – Differential Internal Nest Kit (Part No.742J717)

Differential Internal Nest Kit

from

$219.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Spindle Nut Washer For GM 10.5" 14 Bolt Truck, 2.160" I.D., 1 Tab (Part No.33511)

Spindle Nut Washer For GM 10.5" 14 Bolt Truck, 2.160" I.D., 1 Tab

from

$31.99
Product Features:
  • Spindle nut washer
  • Fits GM 10.5″ 14 bolt truck
  • 1 tab
  • 2.160″ I.D.
See More

Motive Gear – Differential Carrier (Part No.6258340)

Differential Carrier

from

$205.99


Product Features:
  • GM10.5″ 14 BOLT OPEN EMPTY CASE 4:56 & UP
See More

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

from

$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:
  • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Spider Gear Set For GM 9.5" Gura Drip Posi (Part No.16166)

Spider Gear Set For GM 9.5" Gura Drip Posi

from

$561.99
Yukon spider gear set for GM 9.5″ Gura Drip posi. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.

Product Features:
  • Spider gear kit
  • Fits GM 9.5″ with Dura Grip positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

USA Standard Gear – Master Overhaul Kit for the Dana 44 Differential with 30 Spline (Part No.37008)

Master Overhaul Kit for the Dana 44 Differential with 30 Spline

from

$289.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Dana 44 And GM 8.5" Front Spindle Replacement (Part No.32257)

Dana 44 And GM 8.5" Front Spindle Replacement

from

$292.99
Replacement front spindle for Dana 44, & 8.5″, 6 holes, 1.625″ & 2.0″ bearing Journal, front.

Product Features:
  • Fits 1976-1991 GM 1/2 ton front, 1973-1980 GM 3/4 ton front, and 1985-1993 Dodge 1/2 ton front
  • 6 bolt holes
  • 2.00″ and 1.625″ bearing journals
See More

USA Standard Gear – Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.59015)

Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up

from

$289.99
Product Features:
  • Fits Chrysler Dana Spicer 44 with 30 spline axles
  • 3.92 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

National – Multi Purpose Seal (Part No.5778V)

Multi Purpose Seal

from

$69.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -100°F to 450°F; -73°C to 232°C
  • Resistant to hydrocarbon/oxygenate blends and provides superior performance
  • Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
  • Delivers quality and reliable performance for every type of repair
See More

MOOG Driveline Products – Double Cardan CV Flange Yoke (Part No.626)

Double Cardan CV Flange Yoke

from

$84.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Machined bodies to meet the tight tolerances
  • Forged and cast material to meet the performance requirement
  • Minimize the flash lines for less interference
  • Cleaning process induces compressive strength for increased performance
  • Machined and threaded holes for mounting ease
  • Rust preventative added for longer shelf life
See More

Driveworks – Tapered Roller Bearing (Part No.S-A-42)

Tapered Roller Bearing

from

$27.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Super Carrier Shim Kit For GM 9.5" (Part No.55003)

Super Carrier Shim Kit For GM 9.5"

from

$29.99
9.5″ GM differential carrier Supershim kit.

Product Features:
  • Super carrier shim kit for GM 9.5″
  • Interlocking design makes installation much easier
See More

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Axle Shaft Lock Assortment

from

$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Multi Purpose Seal (Part No.473204)

Multi Purpose Seal

from

$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

MOOG Driveline Products – Double Cardan CV Centering Yoke (Part No.607)

Double Cardan CV Centering Yoke

from

$109.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Machined bodies to meet the tight tolerances
  • Forged and cast material to meet the performance requirement
  • Minimize the flash lines for less interference
  • Cleaning process induces compressive strength for increased performance
  • Machined and threaded holes for mounting ease
  • Rust preventative added for longer shelf life
See More

Yukon Gear – (4) Full Circle Snap Rings, Fit 297X U-Joint With Aftermarket Axle (Part No.32084)

(4) Full Circle Snap Rings, Fit 297X U-Joint With Aftermarket Axle

from

$19.99
(4) Full Circle snap rings, fit 297X U-joint with aftermarket axle.

Product Features:
  • Set of four full circle snap rings for Dana Spicer 30 and 44 and GM 8.5″ front
See More

Warn – Hub Service (Part No.11967)

Hub Service

from

$62.99
Ideal for OEM hub replacement. 4140 steel clutch ring. Inner drive gear. Precision cast hub body.

Product Features:
  • Standard Manual Hub Service Kit
See More

Dorman – Help – U-Joint Bolt Kit (Part No.81002)

U-Joint Bolt Kit

from

$6.99
This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)

Drive Shaft Center Support

from

$42.99
Product Features:
  • Brand may vary by location
See More

Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)

Drive Axle Shaft Flange Gasket

from

$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles (Part No.16044)

Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles

from

$315.99
Yukon standard open spider gear kit for GM 10.5″ and 14T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 10.5″ 14 bolt truck open differential
  • Includes two side gears, four pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Motive Gear – Differential Ring and Pinion (Part No.GM12-373)

Differential Ring and Pinion

from

$293.99


Product Features:
  • GM 12BL 8.875 R/P 3.73 MG
See More

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement

from

$6.99
Product Features:
  • Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

Dorman – Ring And Pinion Bearing Installation Kit (Part No.697-100)

Ring And Pinion Bearing Installation Kit

from

$195.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:
  • Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
  • Related repair – smart to have on hand when installing a differential ring and pinion
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Powertrax – No-Slip Traction System (Part No.9207853005)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Popular 1975 Chevrolet K20 Drivetrains Categories

    1975 Chevrolet K20 Drivetrains

    You count on your 1975 Chevrolet K20 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 418 Drivetrains ranging in price from $0.91 to $1,525.00, you’re sure to find everything you need for your 1975 Chevrolet K20.

    Brands matter. If you want to shop a specific Drivetrains brand, we stock 21 different brands like Moog, Valvoline, and Driveworks. 1975 Chevrolet K20 Drivetrains start as low as $0.91!

    One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,035 extensive product reviews on 1975 Chevrolet K20 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.

    Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1975 Chevrolet K20 below to get started!

    Top-Rated Drivetrains Brands For Your 1975 Chevrolet K20

    Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Chevrolet K20 running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.

    Popular Mr. Gasket Drivetrains

    You’ll find popular Mr. Gasket brand products across Differentials. All are waiting to get your 1975 Chevrolet K20 back on the road. Some of the top-rated Mr. Gasket products in these categories are:
    Differential Gasket
    from $18.09
    (1)
    Differential Gasket
    Rear Differential Cover Gaskets

    FAQs for 1975 Chevrolet K20 Drivetrains

    What are the most purchased Drivetrains for the 1975 Chevrolet K20?

    Out of 418 Drivetrains for the 1975 Chevrolet K20, the most popular in our inventory are:
    Greaseable Premium Universal Joint
    from $19.99
    (82)
    Greaseable Premium Universal Joint
    U-Joints
    Greaseable Super Strength Universal Joint
    from $36.99
    (41)
    Greaseable Super Strength Universal Joint
    U-Joints
    Universal Joint
    from $15.99
    (33)
    Universal Joint
    U-Joints

    What are the top-rated 1975 Chevrolet K20 Drivetrains?

    Top-rated Drivetrains for your 1975 Chevrolet K20 based on customer reviews/ratings are:
    Greaseable Super Strength Universal Joint
    from $47.99
    (39)
    Greaseable Super Strength Universal Joint
    “Great”
    Greaseable Super Strength Universal Joint
    from $32.99
    (37)
    Greaseable Super Strength Universal Joint
    “grease fitting I like location dont like needle design to grease should be regular design fitting”
    Greaseable Premium Universal Joint
    from $19.99
    (31)
    Greaseable Premium Universal Joint
    “Greaseable with life time warranty”