1975 Chevrolet Impala Distributors

Essential 1975 Chevrolet Impala Distributors

Carquest Premium – Distributor Cap (Part No.CAC1181)

Distributor Cap

from

$12.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Distributor Cap (Part No.C197)

Distributor Cap

from

$19.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Each anti-lock speed sensor uses OE connectors and terminals ensuring an accurate water-tight connection to the engine wire harness
  • Grommets and wire clips are included on the harness ensuring proper mounting and routing within the car chassis for a cost effective repair solution
  • High-quality glass reinforced plastic resin provides both high temperature and environmental protection resistance
  • Each direct replacement wire harness comes with a protective sleeve preventing wires from chafing and creating short circuits
  • All ABS sensors are 100% tested for proper fit, form and function
See More

ACDelco – Distributor Rotor (Part No.D448X)

Distributor Rotor

from

$16.49
ACDelco Professional Distributor Rotor is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket rotor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Forecast – Forecast Distributor Rotor (Part No.F2020326365FOR)

Forecast Distributor Rotor

from

$11.53
Forecast Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:
  • Superior Surface Finish
  • RFI Resistors (Asian) / RFI Suppression (European)
  • Installation Screws
  • Precision-machined Contacts
  • Finely -tooled Metal Mounting Sleeve (Asian)
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100801)

Flame-Thrower Electronic Distributor Billet

from

$379.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100801 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

MSD Ignition – Distributor; Billet; Chevy V6 Even-Fire (Part No.8597)

Distributor; Billet; Chevy V6 Even-Fire

from

$545.99
Starting on the inside, a 0.500 In. oversized steel shaft spins in a sealed ball bearing and sintered bushing for long endurance and accurate spark delivery throughout the entire RPM range. Mounted on top of the shaft is an easy-to-adjust chromoly mechanical advance assembly. Different advance springs and stop bushings are supplied so you can choose from 24 curves. A maintenance-free magnetic pick-up provides accurate trigger signals to your MSD Ignition control. A precision-manufactured reluctor that is connected to the shaft is responsible for triggering the pick-up. The distributor is topped off with a high quality black cap and race rotor.

Product Features:
  • CNC machined billet aluminum housing and billet aluminum base
  • Will not accept a vacuum advance canister
  • Must Be Used w/An MSD Ignition Control
  • O-ring seals can be installed for oil press. control (Mods only)
  • Supplied w/Socket Style Distributor Cap And Rotor
  • Special oil tract improves lubrication to the dist./cam gear
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100800)

Flame-Thrower Electronic Distributor Billet

from

$371.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100800 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Black Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

Mahle – Mahle Distributor Gasket (Part No.F2102360893MAH)

Mahle Distributor Gasket

from

$2.28
The Mahle Distributor Gasket is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

PerTronix – D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister (Part No.D9006)

D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister

from

$30.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

MSD Ignition – Vacuum Advance Mechanism (PN 8460/PN 8461) (Part No.8463)

Vacuum Advance Mechanism (PN 8460/PN 8461)

from

$36.49
This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI distributors.)

Product Features:
  • Replacement Canister
  • Vacuum Advance Mechanism
  • For Replacement On PN[8460/8461]
  • Size Replacement Canister For Distributor PN[8360/8361]
See More

PerTronix – D701700 Vacuum Canister for Flame-Thrower Billet Distributor (Part No.D701700)

D701700 Vacuum Canister for Flame-Thrower Billet Distributor

from

$36.99


Product Features:
  • PerTronix D701700 Vacuum Canister for PerTronix Flame-Thrower Billet Distributor
  • Replacement Part (only) for PerTronix Flame Thrower Distributors
See More

Carquest Premium – Distributor Cap Carbon Button (Part No.CAA1216)

Distributor Cap Carbon Button

from

$9.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Edelbrock – KIT PARTS (Part No.4802)

KIT PARTS

from

$13.99
KIT PARTS

Mr. Gasket – Hei Advance Curve Kit (Part No.929G)

Hei Advance Curve Kit

from

$16.49
One of the best, and sometimes missed tuning tricks is not to just optimize your initial timing, but to bring in timing advance more quickly than the stock distributor can allow. Bringing timing more quickly than stock can provide substantial increases in both torque and horsepower depending on your combination.This is done by changing the springs under the cap. This kit includes three sets of springs which can be used in different combinations to provide full advance sooner than stock. Use lighter springs to bring the advance more quickly, and heavier springs to bring it in more slowly. Two new weights with nylon bushings are also included as are instructions to help with installation. Springs are color code as follows: Light Springs – Black Medium Springs – Silver Heavy Springs – Gold

Product Features:
  • Brings in timing more quickly than stock for more torque and horsepower
  • Includes three sets of springs to allow for a wider range of custom tuning
  • Instructions included to help with installation
See More

ACDelco – Ignition Distributor Cover (Part No.1875960X)

Ignition Distributor Cover

from

$19.49
ACDelco Professional Distributor Cap Cover is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cover is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Distributor Cap Cover (Part No.CAC1105)

Distributor Cap Cover

from

$12.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Distributor Cap Cover (Part No.C185)

Distributor Cap Cover

from

$18.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • BWD SELECT® caps have solid brass terminals for better conductivity and greater resistance to electrical pitting and erosion for a longer service life
  • The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Distributor Cap Cover (Part No.CAC1073)

Distributor Cap Cover

from

$17.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Distributor Ignition Pickup (Part No.CE10005)

Distributor Ignition Pickup

from

$19.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • OE quality replacement parts for the right fit, form and function
  • Delphi OE technology ignition products are validated to match the vehicles system
  • Delphi’s coil products are designed and endurance tested to resist the common stresses that cause failure
  • OE quality replacement parts for the right fit, form and function
See More

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Distributor Gear; MSD Chevy Distributor; .500 ID; Iron

from

$54.39
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

National – Multi Purpose Seal (Part No.100058)

Multi Purpose Seal

from

$10.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: springless; single-lip
  • Temperature range: -100°F to 450°F; -73°C to 232°C
  • Resistant to hydrocarbon/oxygenate blends and provides superior performance
  • Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
  • Delivers quality and reliable performance for every type of repair
See More

1975 Chevrolet Impala Distributors

Maybe you’re in the middle of a full rebuild of that 1975 Chevrolet Impala. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 72 different Distributors in our inventory ranging from $2.29 to $594.99. That means you can find the exact parts or products you need to keep that 1975 Chevrolet Impala running smoothly.

Distributors are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1975 Chevrolet Impala. ACDelco, FELPRO, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Distributors for your 1975 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 646 reviews in this category, some of the top rated parts include Ignition Distributor Cap with 4.0 stars and Hei Advance Curve Kit with 3.8 stars.

So if you’re in the market for aftermarket Distributors to keep your 1975 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Distributors Brands To Make Your 1975 Chevrolet Impala Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Distributors brands and parts.

Popular Driveworks Distributors

We carry Driveworks parts in our stock across Distributor Cap Kits and Distributor Rotor Buttons categories, plus more. For a 1975 Chevrolet Impala, our most popular Driveworks Distributors include:
Distributor Cap
from $17.05
(3)
Distributor Cap
Distributor Cap Kits
Distributor Rotor
from $11.05
(3)
Distributor Rotor
Distributor Rotor Buttons

FAQs for 1975 Chevrolet Impala Distributors

What are the most purchased Distributors for the 1975 Chevrolet Impala?

Out of 72 Distributors for the 1975 Chevrolet Impala, the most popular in our inventory are:
DISTRIBUTOR MOUNTING GASKET
from $2.29
(5)
DISTRIBUTOR MOUNTING GASKET
Distributor Mount Gaskets
Distributor Rotor
from $16.49
(12)
Distributor Rotor
Distributor Rotor Buttons
HEI Distributor Cap & Rotor Kit with Arc-Thru Protection
from $42.49
(23)
HEI Distributor Cap & Rotor Kit with Arc-Thru Protection
Distributor Cap Kits

What are the top-rated 1975 Chevrolet Impala Distributors?

Top-rated Distributors for your 1975 Chevrolet Impala based on customer reviews/ratings are:
Ignition Distributor Cap
from $26.49
(11)
Ignition Distributor Cap
“Just keeping “That Great GM Feeling””
Hei Advance Curve Kit
from $16.49
(4)
Hei Advance Curve Kit
“Used on 78 Corvette stock distributor on L48 350. Used gold springs and clockwise fit. Set timing to 36 degrees at 2500 rpm. Seems to be running great”
Distributor Rotor
from $13.05
(3)
Distributor Rotor
“Good quality”