1975 Chevrolet Corvette Fuel and Emissions Systems

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

• Helps avoid premature fuel pump failure
• Lint free towel included
• Low suds formulation
• Removes harmful contaminants from the fuel tank

New Platinum Pro Fuel Tank 17 Gallon

Product Features:

• 17 Gallon, Includes Lock Ring Kit, Without Bladder
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Lock ring included with each tank to reduce installation time and to ensure a complete repair
• Made with corrosion resistant, OE approved, Ni Terne steel for durability
• Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
• Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Independently tested for emission control
• Independently tested for emission control
• Protects your fuel from theft and vandalism
• Reduces air pollution with proper sealing and venting
• Manufactured from durable, long-life materials

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Product Features:

• Reduces air pollution with proper sealing and venting
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Protects your fuel from theft and vandalism
• Protects your fuel from theft and vandalism
• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Product Features:

• Passes all state and federal emissions tests
• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Product Features:

• Protects your fuel from theft and vandalism
• Protects your fuel from theft and vandalism
• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Protects your fuel from theft and vandalism
• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Product Features:

• Protects your fuel from theft and vandalism
• Protects your fuel from theft and vandalism
• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Independently tested for emission control
• Independently tested for emission control
• Protects your fuel from theft and vandalism
• Reduces air pollution with proper sealing and venting
• Manufactured from durable, long-life materials

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Come pre-assembled for quick and easy installation.
• Several fastener options to work with any fuel cap compartment configuration
• Fits vehicles orginally equipped with tether
• Reduces air pollution with proper sealing and venting
• Manufactured from durable, long-life materials

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Independently tested for emission control
• Independently tested for emission control
• Protects your fuel from theft and vandalism
• Reduces air pollution with proper sealing and venting
• Manufactured from durable, long-life materials

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Independently tested for emission control
• Independently tested for emission control
• Protects your fuel from theft and vandalism
• Reduces air pollution with proper sealing and venting
• Manufactured from durable, long-life materials

The Edelbrock Pro-Flo 4 XT EFI Kit No. 35810 for 1986 & Earlier Small-Block Chevy engines has the latest technology and features. The EFI system comes complete with a satin finish Pro-Flo XT intake manifold and 35 Lb./Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA high-quality harness with clearly labeled connections for a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and is half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

The Edelbrock Pro-Flo 4 XT EFI Kit No. 35790 for 1986 & Earlier Small-Block Chevy engines has the latest technology and features. The EFI system comes complete with a Pro-Flo XT intake manifold and 29 Lb./Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections for a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, water proof design and is half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

The Edelbrock Pro-Flo 4 EFI Kit No. 35690 for 1986-earlier small-block Chevy engines is a fully sequential multi-port injection system designed with a fuel injector positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Super Victor single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with wire harnesses and ECU. The Super Victor SBC manifold is designed with a larger cross-sectional area in the plenum and large runners for high-horsepower and/or large cubic-inch applications. This kit uses 42 lb/hr injectors and is rated for 675 horsepower at 58 PSI of fuel pressure.The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

The Edelbrock Pro-Flo 4 EFI Kit No. 35770 for 1986 & Earlier Small-Block Chevy engines is equipped with the latest technology and features. The EFI system comes complete with a traditional 4150-Style satin finish single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals.The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

The Edelbrock Pro-Flo 4 EFI Kit No. 35760 for 1986 & Earlier Small-Block Chevy engines is equipped with the latest technology and features. The EFI system comes complete with a traditional 4150-Style satin finish single plane intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

The Evaporative Emission System is designed to control fuel vapors in the vehicle fuel storage system to prevent any release of fuel vapors into the atmosphere. In a normally operating system, released vapors from the fuel storage tank will be directed into an on-board charcoal canister via a piping system and control valves. Under the most ideal engine operating condition, the vapors will be pulled into the engine to be burned during the normal combustion process.

Product Features:

• Application matched components ensure the vehicle will be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Features application specific mounting bracket and accessories as the dealer purchased part provides ease of installation.
• Canister carbon volumn equal to original equipment providing maximum hydrocarbon emission control.

This vapor canister has been made to match the original equipment evap canister on certain vehicle years, makes and models, properly restoring emissions controls.

Product Features:

• Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles
• Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection
• Application specific – reverse engineered from the original design on certain vehicle years, makes and models
• Trustworthy quality – backed by team of engineers and quality specialists in the United States

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Includes all parts needed to complete the repair

Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:

• Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles
• Ideal solution – this rod is a reliable replacement for an original part that has failed
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This Spectre Fuel Pump Mounting Plate for short block Chevrolet engines comes with a gasket, four bolts and four washers. It is used to mount mechanical fuel pumps. It is also triple chrome plated.

Product Features:

• Small block Chevrolet, use for mounting mechanical fuel pumps
• Includes mounting plate gasket
• Includes chrome mounting bolts with washers
• Triple chrome plated

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

• Street Performance
• Flows 80 gph Free Flow
• Shutoff Pressure Pre-Set 7.5 PSI
• Fuel Pressure Regulator Is Not Required
• Heavy Duty Construction For Continuous High rpm Operation
• Fuel Body Casting Can Be Rotated For Plumbing Situations
• Inlet And Outlet Tapped For 1/4 in. NPT
• Inlet/Outlet Tapped For .25 in. NPT

Product Features:

• Unique Valve Design
• Improves Flow Quantity/Quality
• Supports Engines Up To 550 HP
• Hi-Vol 0.375 in. NPT Inlet/Outlet
• Produces 6 psi
• Gasoline Or Mixed Fuels Only

Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:

• Meets or exceeds OE specifications for fit, form and function
• Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
• All fuel pumps are 100% performance tested
• Includes installation gaskets or seals where applicable

Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:

• Nominally Rated At 170,000 PSI Tensile Strength
• Properly Aligned
• Conventional Hex Heads
• Rust-Proof Stainless Bolts
• 170,000 PSI

Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated

Product Features:

• High Output Fuel Flow
• Flows 170 gph Free Flow
• Shutoff Pressure Pre-Set At 8 PSI
• Fuel Pressure Regulator Required Recommend P/N 12-704
• Heavy Duty Construction For Continuous High rpm Operation
• Redesigned High Flow Valves Ensure Adequate Fuel Delivery
• Fuel Body Casting Can Be Rotated For Plumbing Situations
• 3/4in.-16 Inlet And Outlet Ports

High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).

Product Features:

• Hi-Vol 0.5 in. NPT Inlet/Outlet
• Large Alcohol-Proof Diaphragm
• Aircraft-Type Allen Bolts
• Produces 10 psi
• For Gasoline Only
• Finest Quality Material
• Beautifully Detailed
• Use w/Fuel Pressure Regulator PN[8190]

TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.

Product Features:

• Free Flow: 130 GPH
• Pressure: 12-16 PSI
• Housing Material: Aluminum
• Inlet and Outlet: 1/2 in NPT Female

TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.

Product Features:

• Free Flow: 110 GPH
• Pressure: 7.5 PSI
• Housing Material: Aluminum
• Inlet and Outlet: 3/8 in NPT Female

TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.

Product Features:

• Free Flow: 80 GPH
• Pressure: 6 PSI
• Housing Material: Aluminum
• Inlet and Outlet: 1/4 in NPT Female

TSP Mechanical Fuel Pumps are for those who want to upgrade their fuel pump without losing that classic look. Our pumps are cast from lightweight aluminum and given a beautiful, high-quality chrome finish. They?ve been designed to flow at an improved rate over stock. All of our pumps feature an adjustable rotating plate for a custom-fit to your engine bay and have been given heavy duty rubber seals for optimum leak protection.

Product Features:

• Free Flow: 80 GPH
• Pressure: 6 PSI
• Housing Material: Aluminum
• Inlet and Outlet: 1/4 in NPT Female

Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:

• Black Anodized Finish
• Billet Aluminum Material
• Mounting Hardware Included
• Includes 1.5 mm Gasket
• For Small-Block Chevy

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

• BAR Certified adapters
• Adapter check’s a fuel cap’s ability to hold pressure.
• Adapters meet EPA standards for recommended fleet coverage.
• Check adapter application chart for specific makes and models

Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:

• Made From Premium Grade Aerospace Chrome Moly
• Center Less Ground To Precise Diameter
• Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
• Provide With Required Reliability And Improved Performance

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

• BAR Certified adapters
• Adapter check’s a fuel cap’s ability to hold pressure.
• Adapters meet EPA standards for recommended fleet coverage.
• Check adapter application chart for specific makes and models