1975 Chevrolet Caprice Differentials

Essential 1975 Chevrolet Caprice Differentials

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Yukon Gear – Pinion Install Kit For GM 8.2" Differential (Part No.13066)

Pinion Install Kit For GM 8.2" Differential

from

$259.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.2″
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Motive Gear – Differential Spool (Part No.FS10-30)

Differential Spool

from

$187.99


Product Features:
  • FULL SPOOL GM 8.5 30 SPL ST MUST USE 2-LM102911 & 2-LM102949
See More

Yukon Gear – Side Gear Thrust Washer For GM 8.2" & 55P (Part No.33529)

Side Gear Thrust Washer For GM 8.2" & 55P

from

$10.99
Product Features:
  • Side gear thrust washer for GM 8.2″ and 1955-1964 GM passenger car
  • Fits standard open differentials only
See More

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

8.6" GM 12P 12T & F8.8 Carrier Installation Kit

from

$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 12 bolt passenger car and truck and 8.6″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

USA Standard Gear – Bearing Kit For ’81-’99 GM 7.5" & 7.625" Rear (Part No.58015)

Bearing Kit For '81-'99 GM 7.5" & 7.625" Rear

from

$159.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits 1982-1999 GM 7.5″ and 7.625″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Dorman – Differential Cover (Part No.J7019701304DOR)

Differential Cover

from

$41.49
Dorman’s Differential Cover is engineered for long-lasting protection of the differential. Designed as a direct replacement, a proper fit is assured every time.

Product Features:
  • Comes with pre-installed magnet in cover
  • Corrosion resistant coating to help prevent rusting
  • Includes high quality rubber fill plug (where applicable)
  • Constructed from durable stamped steel
See More

Yukon Gear – Positraction Internals For GM 12 Bolt Car And Truck With 33 Spline Axles (Part No.16040)

Positraction Internals For GM 12 Bolt Car And Truck With 33 Spline Axles

from

$305.99
Yukon positraction internals for GM 12P and 12T with 33 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 12 bolt passenger car with 33 spline Dura Grip positraction
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Standard Open Spider Gear Kit For 8.5" GM With 30 Spline Axles (Part No.16055)

Standard Open Spider Gear Kit For 8.5" GM With 30 Spline Axles

from

$207.99
Yukon standard open spider gear kit for 8.5″ GM with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 8.5″ open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Positraction Cross Pin Bolt For For 8.2" GM And Cast Iron Corvette (Part No.33345)

Positraction Cross Pin Bolt For For 8.2" GM And Cast Iron Corvette

from

$53.99
Positraction cross pin bolt for for 8.2″ GM CI ‘Vette.

Product Features:
  • Cross pin bolt for GM 8.2″ and 1963-1979 Corvette
  • For OEM positraction applications only
See More

Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)

Cast Yoke For GM 8.5" With A 1350 U/Joint Size

from

$234.99
Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$41.99
Product Features:
  • Shim kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
See More

Yukon Gear – Positraction Pinion Gear Thrust Washer With Step-Lip Inside For GM 12P And 12T – Fits New Eatons (Part No.33382)

Positraction Pinion Gear Thrust Washer With Step-Lip Inside For GM 12P And 12T - Fits New Eatons

from

$14.99
Positraction pinion gear thrust washer with step-lip inside for GM 12P and 12T. fits new Eatons.

Product Features:
  • Pinion gear thust washer for GM 12 bolt passenger car and truck
  • Fits positraction designs only
  • Has inside lip
See More

Dorman – Help – Pinion Crush Sleeves (Part No.81058)

Pinion Crush Sleeves

from

$6.49
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Motive Gear – Differential Gear Install Kit (Part No.GM8.5IK)

Differential Gear Install Kit

from

$65.99


Product Features:
  • MINI INSTALL KIT GM 8.5 REAR
See More

Pro-King – Differential Ring Gear Bolt (Part No.742G935)

Differential Ring Gear Bolt

from

$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Dura Grip Positraction For GM 12 Bolt Car With 30 Spline Axles, 3.08 To 3.90 Ratio (Part No.26011)

Dura Grip Positraction For GM 12 Bolt Car With 30 Spline Axles, 3.08 To 3.90 Ratio

from

$804.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 12 bolt passenger car with 30 spline axles
  • 3.08-3.90 ratios only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
  • Interlocking design makes installation much easier
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck (Part No.55008)

Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck

from

$21.99
Product Features:
  • Pinion depth shims for GM 7.5″, 7.625″, 7.6 IFS, 7.6 IRS, 7.75″, 8.2″, 1955-1964 passenger car and 12 bolt car and truck
See More

Yukon Gear – Bearing Race Driver (Part No.56016)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89210 race
  • All steel construction
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.G885456)

Performance Differential Ring and Pinion

from

$343.99


Product Features:
  • GM 10BL 8.5 R/P 4.56 FRT/REAR MGP
See More

USA Standard Gear – Pinion Installation Kit For GM 8.5" Rear (Part No.60012)

Pinion Installation Kit For GM 8.5" Rear

from

$115.99
8.5″ GM PINION KIT .

Product Features:
  • Fits GM 8.5″ rear
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Differential Mini Spool

from

$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – Pinion Nut Washer (Part No.33166)

Pinion Nut Washer

from

$23.99
Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2″ & 63-79 Corvette.

Product Features:
  • Pinion nut washer for GM 12 bolt car and truck, 1955-1964 GM car and truck, GM 8.2″ and 1963-1979 Corvette.
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

Clutch Guide For GM 7.5" & 7.6" Dura Grip

from

$10.99
Product Features:
  • Clutch guide
  • Fits GM 7.5″ and 7.625″ Dura Grip
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" With 28 Spline Axles (Part No.26015)

Dura Grip Positraction For GM 8.5" With 28 Spline Axles

from

$859.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ with 28 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

1975 Chevrolet Caprice Differentials

Maybe you’re in the middle of a full rebuild of that 1975 Chevrolet Caprice. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 150 different Differentials in our inventory ranging from $2.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1975 Chevrolet Caprice running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1975 Chevrolet Caprice. Valvoline, FELPRO, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1975 Chevrolet Caprice, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,008 reviews in this category, some of the top rated parts include Bearings with 3.9 stars and Differential Master Bearing Kit – Koyo with 3.8 stars.

So if you’re in the market for aftermarket Differentials to keep your 1975 Chevrolet Caprice rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1975 Chevrolet Caprice Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 Chevrolet Caprice demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Caprice the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1975 Chevrolet Caprice, our most popular Driveworks Differentials include:
Oil Seal
from $7.79
(1)
Oil Seal
Differential Pinion Seals

Top 1975 Chevrolet Caprice Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1975 Chevrolet Caprice. Popular Felpro parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $7.49
(7)
Differential Cover Gasket
Rear Housing Cover Gaskets

FAQs for 1975 Chevrolet Caprice Differentials

What are the most purchased Differentials for the 1975 Chevrolet Caprice?

Out of 150 Differentials for the 1975 Chevrolet Caprice, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil

What are the top-rated 1975 Chevrolet Caprice Differentials?

Top-rated Differentials for your 1975 Chevrolet Caprice based on customer reviews/ratings are:
Bearings
from $23.99
(7)
Bearings
“Good price”
Differential Master Bearing Kit - Koyo
from $156.99
(5)
Differential Master Bearing Kit – Koyo
“was delivered as promised and on time”
Differential Ring and Pinion
from $241.99
(4)
Differential Ring and Pinion
“Perfect match and easy install”