1975 Chevrolet C20 Brake Parts

Essential 1975 Chevrolet C20 Brake Parts

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

Brake Hold-Down Spring Cup

from

$3.79
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Fast and efficient replacement
  • Eliminates heat and corrosion deterioration
See More

Carquest Wearever – Disc Brake Anti-Rattle Clip (Part No.5408-2)

Disc Brake Anti-Rattle Clip

from

$4.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Eliminates heat and corrosion deterioration
  • Helps deliver a quieter, more efficient braking system
  • Restores brakes to like-new performance
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-71069)

Vacuum Brake Booster: Without Master Cylinder

from

$119.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Standard – Semi-Metallic Brake Pads – Front (4-Pad Set) (Part No.MKD153)

Semi-Metallic Brake Pads - Front (4-Pad Set)

from

$37.99
Carquest Standard brake pads are an economical choice for dependable stopping power and quiet braking.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-1873)

Remanufactured Brake Master Cylinder

from

$47.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.H2587)

Drum Brake Self-Adjuster Repair Kit

from

$14.29
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span and maximizes performance of the Drum Brakes
  • Manufactured with quality materials to suppress high stress levels
  • Corrosion resistant coating for long-lasting durability against harsh roads
See More

Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA3600)

Wheel Cylinder Kit

from

$8.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Disc Hardware Kit (Part No.5584A)

Disc Hardware Kit

from

$14.79
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • Helps deliver a quieter, more efficient braking system
  • Prevents noise and premature wear
  • Helps deliver a quieter braking system
See More

ACDelco – Professional DuraStop Brake Wheel Cylinder (Part No.N2020577934ACD)

Professional DuraStop Brake Wheel Cylinder

from

$21.29
ACDelco Professional DuraStop Brake Wheel Cylinders use both aluminum and iron castings making them the ideal high quality aftermarket replacement for many vehicles on the road today. The ACDelco DuraStop wheel cylinders contain both Ethylene Propylene (EPDM) and Styrene Butadiene (SBR) rubber components to provide superior resistance to heat, corrosion, and leakage. Formulated with a smooth bore finish, these cylinders have a quality seal to help increase the life of rubber components. ACDelco Professional Drum Brake Wheel Cylinders are ready to bench bleed and install right out of the box – no assembly required. These premium aftermarket replacement Drum Brake Wheel Cylinders are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
  • Pressure tested to ensure safe and confident braking
  • Trivalent coated bleeder screws provide extra protection and added durability
  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
See More

Dorman – First Stop – Brake Spring Hold Down Pin (Part No.HW1109)

Brake Spring Hold Down Pin

from

$1.99
Our Brake Spring Hold Down Pin is constructed from high-quality materials for a prolonged service life. Replacement restores the brake system to proper operation, helping to ensure road safety.

Product Features:
  • Corrosion-resistant for long-lasting durability against harsh road and weather conditions
  • Heat-resistant to withstand high temperatures generated by the brake system
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards
See More

Dorman – Help – Brake Master Cylinder Gasket (Part No.42071)

Brake Master Cylinder Gasket

from

$11.29
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
  • Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Brake Bar Lever (Part No.21149)

Brake Bar Lever

from

$12.29
This parking brake strut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this parking brake strut blade is designed to match the fit and function of the original part on specified vehicles
  • Ideal solution – this strut is a reliable replacement for an original part that is missing or damaged
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH141186)

Disc Brake Rotor Meets or Exceeds OE Design

from

$142.99
Carquest Wearever Hub And Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design And non-directional finish that eliminates noise And enhances pedal feel. Carquest Wearever Hub And Rotors are designed to dissipate heat helping to eliminate brake fade And increase the life of your pads. Ready to install out of the box to save you time.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-Directional finish decreases break-in time
See More

Dorman – Help – Oversized Brake Caliper Bolt- Rwd Front- 4-3/8In. (Part No.13890)

Oversized Brake Caliper Bolt- Rwd Front- 4-3/8In.

from

$22.99
This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles
  • Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Brake Hold-Down Spring (Part No.1150-2)

Brake Hold-Down Spring

from

$5.99
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
See More

Carquest Wearever – Drum Brake Adjusting Screw Assembly with Tip (Part No.1530)

Drum Brake Adjusting Screw Assembly with Tip

from

$8.29
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured to restrain high tolerances with quality materials
  • Direct replacement for a proper fit
  • Helps deliver a quieter, more efficient braking system
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA86550)

Brake Hose Assembly: Copper Washers Included

from

$26.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Parking Brake Cable (Part No.BCA92882)

Parking Brake Cable

from

$33.99
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
  • Quality design – inner cables are sheathed and lubricated to provide improved durability
  • Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
  • Tough materials – zinc-plated fittings prevent corrosion
See More

Carquest Wearever – Brake Drum Meets or Exceeds OE Specs (Part No.YH140363)

Brake Drum Meets or Exceeds OE Specs

from

$111.99
Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
  • Proper harmonic design and balance helps to reduce brake noise and vibration
  • Optimal metallurgy and casting thickness to preventing warping
See More

ACDelco – Professional DuraStop Friction Ready Brake Caliper – Remanufactured (Part No.N1040577830ACD)

Professional DuraStop Friction Ready Brake Caliper - Remanufactured

from

$48.13
ACDelco Professional Reman Friction Ready Disc Brake Calipers use both aluminum and iron castings, making them the ideal high quality aftermarket replacement. These unloaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. ACDelco Professional Reman Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. These premium aftermarket replacement reman friction ready disc brake calipers are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Pressure tested to ensure safe and confident braking
  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
  • Developed without attached brake pads for customization
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3759)

Door Jamb Switch

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium Gold – Brake Pads With Hardware, Semi-Metallic, Long Pad Life, Quiet Braking (Part No.GMKD52)

Brake Pads With Hardware, Semi-Metallic, Long Pad Life, Quiet Braking

from

$61.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications, provides better value and
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Carquest Wearever – Drum Brake C Washer (Part No.1175-2)

Drum Brake C Washer

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured to restrain high tolerances with quality materials
See More

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41009)

Disc Brake Caliper Repair Kit

from

$4.79
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.5201-2)

Disc Brake Hardware Kit

from

$2.99
Hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Caliper anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents noise and premature wear
  • Helps deliver a quieter, more efficient braking system
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.H5202)

Disc Brake Hardware Kit

from

$5.49
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

1975 Chevrolet C20 Brake Parts

You count on your 1975 Chevrolet C20 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 56 Brake Parts ranging in price from $1.99 to $142.99, you’re sure to find everything you need for your 1975 Chevrolet C20.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 10 different brands like Carquest, Carquest Premium, and Cardone. 1975 Chevrolet C20 Brake Parts start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,680 extensive product reviews on 1975 Chevrolet C20 Brake Parts. Some of the top-rated Brake Parts products we carry are Brake Pads With Hardware, Semi-Metallic, Long Pad Life, Quiet Braking with 4.5 stars and Brake Hose Assembly: Copper Washers Included with 4.2 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1975 Chevrolet C20 below to get started!

Top-Rated Brake Parts Brands For Your 1975 Chevrolet C20

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Chevrolet C20 running right for years to come. In our inventory you’ll find brands like Carquest, Carquest Premium, Cardone, and even more.

Popular Carquest Professional Platinum Brake Parts

You’ll find popular Carquest Professional Platinum brand products across Brake Pads and Shoes. All are waiting to get your 1975 Chevrolet C20 back on the road. Some of the top-rated Carquest Professional Platinum products in these categories are:

Top-Rated Carquest Wearever Brake Parts


If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 1975 Chevrolet C20, and some of our most reviewed Carquest Wearever parts include:
Brake Pads: Reliable and Dependable Stopping
from $35.99
(54)
Brake Pads: Reliable and Dependable Stopping
Rear Brake Pads and Shoes
Drum Brake Hardware Combi-Kit
from $7.99
(43)
Drum Brake Hardware Combi-Kit
Brake Hardware Kits
Brake Shoes
from $54.99
(29)
Brake Shoes
Rear Brake Pads and Shoes

FAQs for 1975 Chevrolet C20 Brake Parts

What are the most purchased Brake Parts for the 1975 Chevrolet C20?

Out of 56 Brake Parts for the 1975 Chevrolet C20, the most popular in our inventory are:
WHEEL CYLINDER
from $17.99
(21)
WHEEL CYLINDER
Brake Wheel Cylinders
Drum Brake Self Adjuster Repair Kit
from $8.79
(25)
Drum Brake Self Adjuster Repair Kit
Brake Hardware Kits
Brake Pads With Hardware, Ceramic, Long Pad Life, Quiet Braking
from $62.99
(17)
Brake Pads With Hardware, Ceramic, Long Pad Life, Quiet Braking
Rear Brake Pads and Shoes

What are the top-rated 1975 Chevrolet C20 Brake Parts?

Top-rated Brake Parts for your 1975 Chevrolet C20 based on customer reviews/ratings are:
Brake Hose Assembly: Copper Washers Included
from $21.99
(11)
Brake Hose Assembly: Copper Washers Included
“The 1st end description states it’s a banjo fitting of which it is not and no sealing washers are provided or needed. The fitting has dual threaded po”
Drum Brake Self-Adjuster Repair Kit
from $14.29
(10)
Drum Brake Self-Adjuster Repair Kit
“A must have for no hassle brake replacement.”