1975 Cadillac Fleetwood Belts and Hoses

Essential Belts and Hoses for 1975 Cadillac Fleetwoods

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Dorman – Engine Oil Cooler Line (Part No.625-177)

Engine Oil Cooler Line

from

$73.99
This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:
  • Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly.
  • Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler.
  • Easy to install – no special tools required
  • Quality tested – rigorous quality control ensure this hose assembly conforms to product standards
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

ACDelco – GM Original Equipment Engine Oil Cooler Hose (Part No.A6200202839ACD)

GM Original Equipment Engine Oil Cooler Hose

from

$60.88
The ACDelco GM Original Equipment Engine Oil Cooler Hose Assembly is a GM-recommended replacement for your vehicle’s original component. It transfers engine oil between the engine and the engine oil cooler. This original equipment engine oil cooler hose assembly has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27.50" Long, 1.50" Diameter (Part No.E70621)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27.50" Long, 1.50" Diameter

from

$20.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

ACDelco – Professional Molded Coolant Hose (Part No.G2000576683ACD)

Professional Molded Coolant Hose

from

$39.91
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1.50" Diameter (Part No.C71204)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1.50" Diameter

from

$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

ACDelco – Professional Molded Coolant Hose (Part No.G2000583798ACD)

Professional Molded Coolant Hose

from

$111.38
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

Gates – Vulco« Straight Coolant Hose (Part No.24020)

Vulco« Straight Coolant Hose

from

$0.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:
  • Heat-resistant cover
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom fit installations
  • Meets SAE 20R1 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25480)

Vulco-Flex« II Flexible Coolant Hose

from

$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25482)

Vulco-Flex« II Flexible Coolant Hose

from

$24.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.5 In. to 1.25 In. Inner Dia. (Part No.81091)

Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.5 In. to 1.25 In. Inner Dia.

from

$19.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.25" Long, 1.25" Diameter (Part No.E71273)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.25" Long, 1.25" Diameter

from

$20.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 32" Long, 1.25" Diameter (Part No.E71082)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 32" Long, 1.25" Diameter

from

$15.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1.25" Diameter (Part No.E71557)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1.25" Diameter

from

$13.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26502)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.57015)

Automotive V-Belt, Driveworks

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Driveworks – Automotive V-Belt (Part No.50013)

Automotive V-Belt

from

$10.39
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – Bottom Cog V-Belt: 47" Long, Exact Fit Premium Quality (Part No.17470)

Bottom Cog V-Belt: 47" Long, Exact Fit Premium Quality

from

$24.49
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Dayco – Bottom Cog V-Belt; 56 Inch Long, Exact Fit Premium Quality (Part No.15560)

Bottom Cog V-Belt; 56 Inch Long, Exact Fit Premium Quality

from

$23.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Dorman – Help – Carburetor Pre-Heater Hose – 2 In. X 18 In. – Aluminum (Part No.96024)

Carburetor Pre-Heater Hose - 2 In. X 18 In. - Aluminum

from

$6.99
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles.
  • Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Gates – Premium Molded Coolant Hose (Part No.22038)

Premium Molded Coolant Hose

from

$11.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 3.25" Long, .63" Diameter (Part No.A70001)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 3.25" Long, .63" Diameter

from

$10.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 1/2 Inch Length (Part No.87841)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 17 1/2 Inch Length

from

$19.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Premium Molded Heater Hose (Part No.18030)

Premium Molded Heater Hose

from

$16.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco« Straight Coolant Hose (Part No.24028)

Vulco« Straight Coolant Hose

from

$1.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:
  • Heat-resistant cover
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom fit installations
  • Meets SAE 20R1 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length

from

$23.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (Part No.28412)

Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot)

from

$3.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Upgrade your 1975 Cadillac Fleetwood with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1975 Cadillac Fleetwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Belts and Hoses are key to keeping your Fleetwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Belts and Hoses for the 1975 Cadillac Fleetwood, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Oil Cooler Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1975 Cadillac Fleetwood at great prices. Our Belts and Hoses inventory for this model ranges from just $1.49 to $87.99, with an average price of $24.48. Our 27 Belts and Hoses in stock come from 6 trusted brands, so you’re sure to find the right part for your 1975 Cadillac Fleetwood without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 Cadillac Fleetwood, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Dorman, and more. Dayco Belts and Hoses start at just $13.49 and boast an impressive 5 stars average rating from customers. With 160 customer reviews and counting, our 1975 Cadillac Fleetwood Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1975 Cadillac Fleetwood is always ready to roll. We’re committed to providing you with everything you need to keep your Fleetwood in top shape, all in one place. Start shopping confidently below for your 1975 Cadillac Fleetwood!

Best-Selling Serpentine and V Belts for 1975 Cadillac Fleetwoods

Enhance the driving experience in your Cadillac with 15 quality Serpentine and V Belt components, starting at $4.99.

Dayco – Bottom Cog V-Belt; 37 Inch Long, Exact Fit Premium Quality (Part No.15370)

Bottom Cog V-Belt; 37 Inch Long, Exact Fit Premium Quality

from

$15.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Dayco – Bottom Cog V-Belt; 38 Inch Long, Exact Fit Premium Quality (Part No.15380)

Bottom Cog V-Belt; 38 Inch Long, Exact Fit Premium Quality

from

$15.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.37015)

Automotive V-Belt, Driveworks

from

$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Driveworks – Automotive V-Belt (Part No.50013)

Automotive V-Belt

from

$10.39
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Driveworks – Automotive V-Belt (Part No.38015)

Automotive V-Belt

from

$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – Bottom Cog V-Belt; 52 Inch Long, Exact Fit Premium Quality (Part No.15520)

Bottom Cog V-Belt; 52 Inch Long, Exact Fit Premium Quality

from

$27.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Dayco – Bottom Cog V-Belt; 50 Inch Long, Exact Fit Premium Quality (Part No.15500)

Bottom Cog V-Belt; 50 Inch Long, Exact Fit Premium Quality

from

$13.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Dayco – Bottom Cog V-Belt: 47" Long, Exact Fit Premium Quality (Part No.17470)

Bottom Cog V-Belt: 47" Long, Exact Fit Premium Quality

from

$24.49
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9570)

Automotive XL« High Capacity V-Belt

from

$43.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Dayco – Bottom Cog V-Belt; 60.5 Inch Long, Exact Fit Premium Quality (Part No.17605)

Bottom Cog V-Belt; 60.5 Inch Long, Exact Fit Premium Quality

from

$22.79
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  •  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  •  Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9605)

Automotive XL« High Capacity V-Belt

from

$34.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9470)

Automotive XL« High Capacity V-Belt

from

$25.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.52015)

Automotive V-Belt, Driveworks

from

$5.09
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.47017)

Automotive V-Belt, Driveworks

from

$4.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Most Popular 1975 Cadillac Fleetwood Oil Cooler Hoses

Customize your Cadillac with 2 Oil Cooler Hoses products like Engine Oil Cooler Hoses, all priced under $87.99.

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Top Picks for 1975 Cadillac Fleetwood Duct Hoses

Upgrade Cadillac Fleetwoods with top-quality Duct Hoses parts, including 1 OEM and aftermarket selections for your 1975 model.

Dorman – Help – Carburetor Pre-Heater Hose – 2 In. X 18 In. – Aluminum (Part No.96024)

Carburetor Pre-Heater Hose - 2 In. X 18 In. - Aluminum

from

$6.99
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles.
  • Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

In-Demand Engine Cooling Hoses for 1975 Cadillac Fleetwoods

Select from 3 premium Engine Cooling Hoses parts for your 1975 Cadillac Fleetwood, with prices ranging from $1.49 to $25.49.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 1.50" Diameter (Part No.C70477)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 1.50" Diameter

from

$16.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25480)

Vulco-Flex« II Flexible Coolant Hose

from

$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)

Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot)

from

$1.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Most Sold 1975 Cadillac Fleetwood Radiator Hoses

Explore our best-selling Cadillac parts for the 1975 Fleetwood among 6 OEM and aftermarket options starting from $3.99.

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length

from

$23.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.5 Inch Inner Dia. (Part No.81171)

Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.5 Inch Inner Dia.

from

$20.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27.50" Long, 1.50" Diameter (Part No.E70621)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27.50" Long, 1.50" Diameter

from

$20.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Coolant Hose (Part No.21260)

Premium Molded Coolant Hose

from

$49.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.20683)

Premium Molded Coolant Hose

from

$42.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (Part No.28412)

Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot)

from

$3.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Top-Rated Belts and Hoses Brands For Your 1975 Cadillac Fleetwood

Shop for the best-rated brands offering Belts and Hoses and other products for your 1975 Cadillac Fleetwoods. Below you’ll find some of our best rated Belts and Hoses from Dayco and Dorman, and more. Belts and Hoses from these brands that fit a 1975 Fleetwood start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1975 Cadillac Fleetwood Belts and Hoses

When it comes to maintaining or upgrading your 1975 Cadillac Fleetwood, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1975 Cadillac Fleetwood. With over 10 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.49, with an average price of just $20.05. Plus, with over 30 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Bottom Cog V-Belt; 50 Inch Long, Exact Fit Premium Quality
from
$13.49
This product is not rated

Bottom Cog V-Belt; 50 Inch Long, Exact Fit Premium Quality

“”

Popular Dorman 1975 Cadillac Fleetwood Belts and Hoses

Dorman auto parts is one of the highest quality Belts and Hose brands in the market. Any 1975 Cadillac Fleetwood owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1975 Fleetwood, Advance Auto Parts carries a full inventory of 1 Dorman Belts and Hoses. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Dorman Belts and Hoses range up to $6.99, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Carburetor Pre-Heater Hose - 2 In. X 18 In. - Aluminum
from
$6.99

(4)

Carburetor Pre-Heater Hose – 2 In. X 18 In. – Aluminum

“Despite the search function this is a perfect fit for my 1974 Beetle. Best quality I ever had with one of these. Light years ahead of the paper or al”

FAQs for 1975 Cadillac Fleetwood Belts and Hoses

Which Belts and Hoses are best-sellers for 1975 Cadillac Fleetwoods?

Out of 27 Belts and Hoses that fit 1975 Cadillac Fleetwoods, the following parts are the top sellers:

What’s the price range for 1975 Cadillac Fleetwood Belts and Hoses?

Belts and Hose prices for the 1975 Cadillac Fleetwood start at $1.49 and go up to $87.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1975 Cadillac Fleetwood?

The average price for Belts and Hoses for the 1975 Cadillac Fleetwood is $24.48. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Cadillac Fleetwood model years?

Yes, we currently carry Belts and Hoses for 31 model years of Cadillac Fleetwoods between 1965 and 1996. Belts and Hoses are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Belts and Hoses for my 1975 Cadillac Fleetwood?

The cheapest 1975 Cadillac Fleetwood Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 1975 Cadillac Fleetwood?

Out of 160 reviews by customers, our 1975 Cadillac Fleetwood Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1975 Cadillac Fleetwood and their top-rated products:

What types of Belts and Hoses do you sell for my 1975 Cadillac Fleetwood?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1975 Cadillac Fleetwood:

Can I get help with 1975 Cadillac Fleetwood Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Belts and Hoses and more.

What is your return policy for Cadillac Fleetwood Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Cadillac Fleetwood Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.