1975 Buick Skylark Performance and Racing Products

Essential 1975 Buick Skylark Performance and Racing Products

Mr. Gasket – Differential Cover Kit (Part No.9891)

Differential Cover Kit

from

$61.99
Made from heavy gauge steel, these chrome plated rear end covers are complete with bolts and gaskets.

Product Features:
  • Made of chrome plated steel
  • Fits GM 8 1/2 in. 10 bolt
  • Complete kit with gasket and bolts
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1007)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More

Edelbrock – Nitrous Performer EFI Wet System (Part No.71820)

Nitrous Performer EFI Wet System

from

$730.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
See More

Edelbrock – Classic Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Black Aluminum (Part No.41993)

Classic Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Black Aluminum

from

$432.99
The Edelbrock part #41993 Classic Series Valve Covers are designed for AMC/Jeep 290-401 V8 1967-91 applications and have a Black finish. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:
  • AMC/Jeep 290-401 V8 1967-91
  • Tall
  • Black Aluminum
  • Set Of Two
See More

Edelbrock – Sure Seat Valve Springs for Oldsmobile 330-403 V8 1967-1984 (Part No.5812)

Sure Seat Valve Springs for Oldsmobile 330-403 V8 1967-1984

from

$80.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Accel – Distributor Cap And Rotor Kit (Part No.8123)

Distributor Cap And Rotor Kit

from

$40.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2904)

PERFORMANCE REAR MAIN SEAL SET

from

$16.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

B & M – Automatic Shifter, Megashifter (Part No.80690)

Automatic Shifter, Megashifter

from

$461.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. First off let’s talk function. The Megashifters positive ratcheting funct

Product Features:
  • Universal Floor Mount
  • Base Can Be Trimmed-Custom Fit
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
See More

Airaid – Air Filter (Part No.800-315)

Air Filter

from

$60.99
304 stainless steel mesh. 5 layer construction. Most durable filters in the industry. Outperforms the others in clean air testing. Assures cleanest air possible from washable filter. Provides balance between air flow and peak filtration. Lifetime no hassle warranty.

Product Features:
  • Multi-Layer Construction
  • Most Durable Filters In The Industry
  • Outperforms The Others In Clean Air Testing
  • Assures Cleanest Air Possible From Washable Filter
  • Washable And Reusable
  • Made In The USA
  • Lifetime No Hassle Warranty
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2103R)

Leaf Spring Bushing Set

from

$90.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Mr. Gasket – Throttle Cable Bracket (Part No.9885)

Throttle Cable Bracket

from

$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.

Product Features:
  • 2 in. adjustable range
  • Includes necessary hardware
  • Chrome plated
  • Individually packaged
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Control Arm Bump Stop Set

from

$14.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

Spectre – SBC Aluminum Timing Cover (Part No.4935)

SBC Aluminum Timing Cover

from

$99.99
The Spectre Timing Cover Kit is designed to protect components such as timing gears and chain or belt. This timing cover features a polished aluminum finish, and is engineered for optimum fit and function.

Product Features:
  • Fits Small Block Chevrolet 283-400
  • Polished aluminum construction
  • Made from lightweight aluminum
  • Includes cover, bolts, gaskets and seal
See More

Spectre – Oil Pan (Part No.5494)

Oil Pan

from

$77.99
This Spectre Oil Pan features a steel construction and an unplated raw finish. This stock capacity oil pan was designed for 1955-1979 small block Chevrolet 283-350 engines with driver’s side dipstick (except ’62-67 Chevrolet II). This oil pan won’t fit Corvette models with stock exhaust.

Product Features:
  • Steel construction
  • Unplated raw finish
  • Stock capacity
  • Designed for 1955-1979 small block Chevrolet 283-350 engines with driver’s side dipstick
  • Won’t fit Corvette models with stock exhaust
See More

Edelbrock – TIMING CHAIN (Part No.7844)

TIMING CHAIN

from

$29.99
Product Features:
  • Timing Chain Only
See More

Holley – Mechanical Fuel Pump (Part No.12-327-11)

Mechanical Fuel Pump

from

$144.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 110 gph Free Flow
  • Shutoff Pressure Pre-Set From 6.5 To 8 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
  • Inlet/Outlet Tapped For 3/8 in. NPT
See More

Accel – Super Stock Coil (Part No.8140)

Super Stock Coil

from

$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$25.99


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3168R)

Control Arm Bushing Set

from

$57.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Mallory – Distributor Cap (Part No.261)

Distributor Cap

from

$44.99
Maximum electrical conductivity. Impact resistant. High dialectic strength. Prevents damage.

Product Features:
  • Maximum Electrical Conductivity
  • Impact Resistant
  • High Dielectric Strength
  • Prevents Damage
See More

Richmond Gear – RngPnn (Part No.GM75342TK)

RngPnn

from

$191.99
RngPnn

Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942043)

40 Series Muffler, 2in Offset Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound

from

$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Mr. Gasket – Alternator (Part No.5122)

Alternator

from

$266.99
Quality chrome plated and remanufactured to exceed OEM specifications for maximum dependability. Tested and output rated at 60 amps.

Product Features:
  • Exceeds OEM specifications
  • Output rated to 60 amps
  • Remanufactured
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$36.99
Brake Bleeder Screws

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$563.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Energy Suspension – Sway Bar End Link Kit (Part No.9.8117R)

Sway Bar End Link Kit

from

$25.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:
  • Made from HYPER-Flex Polyurethane
  • Allows Vehicle to Work At Maximum Efficiency
  • Easy to Install
  • Superior Performance and Greater Longevity
  • Lasts Much Longer Than OEM Rubber End Links
See More

1975 Buick Skylark Performance and Racing Products

You count on your 1975 Buick Skylark to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 84 Performance and Racing Products ranging in price from $5.99 to $1,243.99, you’re sure to find everything you need for your 1975 Buick Skylark.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 17 different brands like K&N, Energy Suspension, and Accel. 1975 Buick Skylark Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 692 extensive product reviews on 1975 Buick Skylark Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Differential Ring And Pinion with 4.2 stars and HEI Advance Curve Kit with 3.8 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1975 Buick Skylark below to get started!

Top-Rated Performance and Racing Products Brands For Your 1975 Buick Skylark

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Buick Skylark running right for years to come. In our inventory you’ll find brands like K&N, Energy Suspension, Accel, and even more.

Popular K&N Performance and Racing Products

You’ll find popular K&N brand products across Performance Oil Filters. All are waiting to get your 1975 Buick Skylark back on the road. Some of the top-rated K&N products in these categories are:

FAQs for 1975 Buick Skylark Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1975 Buick Skylark?

Out of 84 Performance and Racing Products for the 1975 Buick Skylark, the most popular in our inventory are:
Distributor Cap And Rotor Kit
from $41.99
(23)
Distributor Cap And Rotor Kit
Performance Distributor Cap and Rotor Kits
Sway Bar End Link Kit
from $25.99
(7)
Sway Bar End Link Kit
Performance Sway Bar Link Kits
Fuel Pump Block-Off Plate
from $13.99
(6)
Fuel Pump Block-Off Plate
Performance Fuel Pumps

What are the top-rated 1975 Buick Skylark Performance and Racing Products?

Top-rated Performance and Racing Products for your 1975 Buick Skylark based on customer reviews/ratings are:
Differential Ring And Pinion
from $342.99
(23)
Differential Ring And Pinion
“Good product good price”
HEI Advance Curve Kit
from $15.99
(4)
HEI Advance Curve Kit
“Used on 78 Corvette stock distributor on L48 350. Used gold springs and clockwise fit. Set timing to 36 degrees at 2500 rpm. Seems to be running great”
Wire Set; Street Fire; Multi-Angle plug; HEI; Universal
from $67.99
(3)
Wire Set; Street Fire; Multi-Angle plug; HEI; Universal
“GREAT PRODUCT”