1975 Bricklin SV-1 Performance and Racing Products
Find Your Specific 1975 Bricklin SV-1 Performance and Racing Products
Below you will find various in-demand Bricklin Performance and Racing Products, components and accessories for your 1975 SV-1. Advance Auto Parts has popular SV-1 parts like Performance Exhaust Products, Performance Engines, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other SV-1 model years including
1974
1976 and more. Select a category of 1975 Bricklin SV-1 Performance and Racing Products below and start saving instantly.
Popular 1975 Bricklin SV-1 Performance and Racing Products Categories
Essential Performance and Racing Products for 1975 Bricklin SV-1s
Mr. Gasket – Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (Part No.42S)
from
$69.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part No:12S for V8 gasoline applications, part No:12D for diesel applications or part No:12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!.
See More
Edelbrock – Edelbrock Small-Block Ford E-205 Cylinder Head with Flat Tappet Camshaft, Set of 2, 5028 (Part No.5028)
from
$2168.99
The Edelbrock No. 5028 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised exhaust ports and larger diameter springs for higher lift camshafts, making them ideal for a spec series racer and larger displacement engines. The Edelbrock No. 5028 E-Street Cylinder heads also have as-cast ports and maintain the stock exhaust port location, making them compatible with OEM headers and hardware.
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1430 (Part No.1430)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Holley – Holley Professional Race Carburetor: 1250 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Hard Core Gray, 0-80908HB (Part No.0-80908HB)
from
$1999.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
See More
Holley – Holley Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80670 (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Edelbrock – Edelbrock Water Pump Ford 351w Racing, 8833 (Part No.8833)
from
$352.99
For circle track and endurance racing engines. Black anodized finish with 0.10 inch thicker rear cover. Impeller is larger than others for max pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of black with in 1 piece. Only flows in one-direction for optimum efficiency.
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1240 (Part No.1240)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE CYLINDER HEAD GASKET, 1013 (Part No.1013)
from
$59.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Edelbrock – Edelbrock RPM Air-Gap Small Block Ford 351W Intake Manifold, 7581 (Part No.7581)
from
$492.99
Edelbrock part #7581 RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than #7181 for compatibility with large displacement, stroker 351W based engines. Includes bosses for nitrous and rear water crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
See More
Holley EFI – Holley EFI MFLD KIT FORD 351W HI-RAM 95MM EFI, 300-241 (Part No.300-241)
Edelbrock – Edelbrock Performer 351-W Intake Manifold for S/B Ford 351 Windsor, 2181 (Part No.2181)
Holley EFI – Holley EFI KIT FORD 351W HI-RAM 95MM EFI BLACK, 300-241BK (Part No.300-241BK)
Top Street Performance – Top Street Performance Ford Small Block 351W V8 HEI Distributor with Red Cap, JM6510R (Part No.JM6510R)
from
$91.99
TSP HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, meaning precision is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup.
See More
Mallory – Mallory Unilite Electronic Ignition Distributor Series 37, 3760001 (Part No.3760001)
from
$614.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1811 (Part No.1811)
from
$30.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
PerTronix – PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$91.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
See More
Edelbrock – Edelbrock Camshaft and Lifter Kit, 7182 (Part No.7182)
from
$471.99
“Edelbrock part No: 7182 Performer RPM Camshaft is designed for Ford 351W V-8 applications. This Edelbrock cam kit produced 400 HP & 412 ft-lbs. of torque when used with No: 7181 intake and No: 60259 cylinder heads on a 351W engine. The camshaft works well with high-performance’s street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: – Duration at .050 Intake: 234 degrees – Duration at .050 Exhaust: 244 degrees – Lift at Valve Intake: .496″” – Lift at Valve Exhaust: .520″” – Lobe Separation: 110 Degrees – Intake Centerline: 106 Degrees – Idle Vacuum at 1000 RPM’s: 11″””
See More
Upgrade your 1975 Bricklin SV-1 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1975 Bricklin SV-1, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Bricklin or enhancing its overall performance, Performance and Racing Products are key to keeping your SV-1 functioning at its best. At Advance Auto Parts, we offer a wide selection of 17 Performance and Racing Products for the 1975 Bricklin SV-1, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Engines
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1975 Bricklin SV-1 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $28.99 to $2,168.99, with
an average price of $536.46.
Our 17 Performance and Racing Products in stock come from 7 trusted brands, so you’re sure to find the right part for your 1975 Bricklin SV-1 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 Bricklin SV-1, we stock popular OEM and aftermarket Performance and Racing Products from top names
like FEL-PRO Performance, and more.
FEL-PRO Performance Performance and Racing Products
start at just $28.99 and boast an impressive 4.2 stars average rating from customers.
With 28 customer reviews and counting, our 1975 Bricklin SV-1 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products
and more to make sure your 1975 Bricklin SV-1 is always ready to roll. We’re committed to providing you with everything you need to keep your SV-1 in top shape, all in one place.
Start shopping confidently below for your 1975 Bricklin SV-1!
Best-Selling Performance Exhaust Products for 1975 Bricklin SV-1s
Enhance the driving experience in your Bricklin with 1 quality Performance Exhaust Product components, starting at $28.99.
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1430 (Part No.1430)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Most Popular 1975 Bricklin SV-1 Performance Engines
Customize your Bricklin with 10 Performance Engines products
like Performance Engine Intake Manifold Gaskets,
Performance Intake Manifolds, and
Performance Engine Cylinder Head Gaskets, all
priced under $2,168.99.
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1811 (Part No.1811)
from
$30.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1240 (Part No.1240)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE CYLINDER HEAD GASKET, 1013 (Part No.1013)
from
$59.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Edelbrock – Edelbrock Small-Block Ford E-205 Cylinder Head with Flat Tappet Camshaft, Set of 2, 5028 (Part No.5028)
from
$2168.99
The Edelbrock No. 5028 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised exhaust ports and larger diameter springs for higher lift camshafts, making them ideal for a spec series racer and larger displacement engines. The Edelbrock No. 5028 E-Street Cylinder heads also have as-cast ports and maintain the stock exhaust port location, making them compatible with OEM headers and hardware.
See More
Holley EFI – Holley EFI MFLD KIT FORD 351W HI-RAM 95MM EFI, 300-241 (Part No.300-241)
Holley EFI – Holley EFI KIT FORD 351W HI-RAM 95MM EFI BLACK, 300-241BK (Part No.300-241BK)
Edelbrock – Edelbrock RPM Air-Gap Small Block Ford 351W Intake Manifold, 7581 (Part No.7581)
from
$492.99
Edelbrock part #7581 RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that’s been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than #7181 for compatibility with large displacement, stroker 351W based engines. Includes bosses for nitrous and rear water crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
See More
Edelbrock – Edelbrock Camshaft and Lifter Kit, 7182 (Part No.7182)
from
$471.99
“Edelbrock part No: 7182 Performer RPM Camshaft is designed for Ford 351W V-8 applications. This Edelbrock cam kit produced 400 HP & 412 ft-lbs. of torque when used with No: 7181 intake and No: 60259 cylinder heads on a 351W engine. The camshaft works well with high-performance’s street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: – Duration at .050 Intake: 234 degrees – Duration at .050 Exhaust: 244 degrees – Lift at Valve Intake: .496″” – Lift at Valve Exhaust: .520″” – Lobe Separation: 110 Degrees – Intake Centerline: 106 Degrees – Idle Vacuum at 1000 RPM’s: 11″””
See More
Edelbrock – Edelbrock Performer 351-W Intake Manifold for S/B Ford 351 Windsor, 2181 (Part No.2181)
Edelbrock – Edelbrock Water Pump Ford 351w Racing, 8833 (Part No.8833)
from
$352.99
For circle track and endurance racing engines. Black anodized finish with 0.10 inch thicker rear cover. Impeller is larger than others for max pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of black with in 1 piece. Only flows in one-direction for optimum efficiency.
See More
Top Picks for 1975 Bricklin SV-1 Performance Fuel Systems
Upgrade Bricklin SV-1s with top-quality Performance Fuel Systems parts, including 4 OEM and aftermarket selections for your 1975 model.
Mr. Gasket – Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (Part No.42S)
from
$69.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part No:12S for V8 gasoline applications, part No:12D for diesel applications or part No:12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!.
See More
Holley – Holley 2 BBL Carbs, 0-4412S (Part No.0-4412S)
from
$549.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
See More
Holley – Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny, 0-4412BKX (Part No.0-4412BKX)
from
$799.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!
See More
Holley – Holley Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate, 0-4412C (Part No.0-4412C)
from
$665.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
See More
In-Demand Performance Distributors for 1975 Bricklin SV-1s
Select from 1 premium Performance Distributors parts for your 1975 Bricklin SV-1.
Top Street Performance – Top Street Performance Ford Small Block 351W V8 HEI Distributor with Red Cap, JM6510R (Part No.JM6510R)
from
$91.99
TSP HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, meaning precision is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup.
See More
Most Sold 1975 Bricklin SV-1 Performance Ignition Products
Explore our best-selling Bricklin parts for the 1975 SV-1 among 1 OEM and aftermarket options starting from $91.99.
PerTronix – PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$91.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
See More
Top-Rated Performance and Racing Products Brands For Your 1975 Bricklin SV-1
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1975 Bricklin SV-1s. Below you’ll find some of our best rated Performance and Racing Products from FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1975 SV-1 start at just $28.99 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular FEL-PRO Performance 1975 Bricklin SV-1 Performance and Racing Products
When it comes to maintaining or upgrading your 1975 Bricklin SV-1, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. FEL-PRO Performance ticks all of those boxes. We offer a wide selection of FEL-PRO Performance Performance and Racing Products, specifically designed for the 1975 Bricklin SV-1. With over 1 FEL-PRO Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.99. Plus, with over 1 customer reviews and an average rating of 4.2 stars, you can trust that our FEL-PRO Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$28.99
(1)
FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1430
“Works good no leaks on headers”
FAQs for 1975 Bricklin SV-1 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1975 Bricklin SV-1s?
Out of 17 Performance and Racing Products that fit 1975 Bricklin SV-1s, the following parts are the top sellers:
- FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1811 (5189810) – $30.99
- PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (10110715) – $91.99
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1240 (19781811) – $39.99
What’s the price range for 1975 Bricklin SV-1 Performance and Racing Products?
Performance and Racing Product prices for the 1975 Bricklin SV-1 start at $28.99 and go up to $2,168.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1975 Bricklin SV-1?
The average price for Performance and Racing Products for the 1975 Bricklin SV-1 is $536.46. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Bricklin SV-1 model years?
What are the cheapest Performance and Racing Products for my 1975 Bricklin SV-1?
The cheapest 1975 Bricklin SV-1 Performance and Racing Products we carry in stock are:
- FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1430 (19781910) – $28.99
- FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1811 (5189810) – $30.99
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1240 (19781811) – $39.99
- FEL-PRO Performance PERFORMANCE CYLINDER HEAD GASKET, 1013 (5189578) – $59.99
- Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (5400317) – $69.99
What are the top-rated Performance and Racing Products that fit the 1975 Bricklin SV-1?
Out of 28 reviews by customers, our 1975 Bricklin SV-1 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1975 Bricklin SV-1 and their top-rated products:
- Performance Fuel Systems
What types of Performance and Racing Products do you sell for my 1975 Bricklin SV-1?
As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1975 Bricklin SV-1:
Can I get help with 1975 Bricklin SV-1 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Bricklin Performance and Racing Products and more.
What is your return policy for Bricklin SV-1 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Bricklin SV-1 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
