1975 BMW 3.0Si Brake Parts

Essential Brake Parts for 1975 BMW 3.0Sis

ATE – Cod Brake Disc (Rotor) (Part No.N100078371ATE)

Cod Brake Disc (Rotor)

from

$74.55
ATE, a brand of Continental with more than 100 years of experience in brake development, is once again setting the standards in quality, innovation and system expertise. The high-carbon brake discs have a number of positive characteristics – they optimize durability and prevent, for example, brake judder and noise. With extremely low tolerances of max. 30 µm for lateral runout and max. 10 µm for thickness variation, ATE provides ideal aftermarket solutions in its role as a system supplier with OE expertise. The tolerances of the centering bores are also extremely low in order to prevent imbalance and radial runout. This contributes to extending the service life of the wheel suspension and wheel bearings. Depending on the vehicle model, mounting bolts are included with the brake discs at no extra charge. These mounting bolts are used to fix the brake disc to the wheel hub during installation. The bolt symbol on the brake disc label provides a clear indication that mounting bolts are included in the package. The mounting bolts included with ATE brake disc packages are always coated bolts, which reduces their susceptibility to corrosion and increases the longevity of the product. The MetaCote protective coating formulation is cured at approximately 572F. No grease or oil to remove. This helps protect against road salt, brake fluid and other corrosives – sheds water and dirt for clean appearance behind cast spoke wheels. Reduction in overall installation time.

Product Features:
  • OE-equivalent and a direct fit replacement.
  • Patented RotorLife wear indicator.
  • Optimum performance at all temperatures.
  • Reduced rotor wear.
  • less susceptible to noise and vibration.
  • MetaCote protective anti-corrosion coating.
See More

FTE – Brake M/C Reservoir (Part No.N301727178FTE)

Brake M/C Reservoir

from

$5.67
Brake M/C Reservoir

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA113300)

Brake Hose Assembly: Copper Washers Included

from

$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38002)

Brake Hose Assembly: Copper Washers Included

from

$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

ATE – Brake Reservoir (Part No.N3010438841ATE)

Brake Reservoir

from

$27.55
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers.
See More

ATE – Original OE Formuld Brake Pad Set (Part No.N101028643ATE)

Original OE Formuld Brake Pad Set

from

$46.94
ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking

Product Features:
  • OE engineered brake system technology assures optimum fit and performance
  • Advanced friction vehicle specific formulations
  • Reduced dusting and extend pad life
  • Application matched premium quality friction grade
  • Underlayer design helps reduce noise, vibration and harshness
  • Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation
See More

ATE – ATE Brake Master Cylinder (Part No.N300019752ATE)

ATE Brake Master Cylinder

from

$461.73
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

Upgrade your 1975 BMW 3.0Si with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1975 BMW 3.0Si, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Brake Parts are key to keeping your 3.0Si functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Brake Parts for the 1975 BMW 3.0Si, designed to meet your needs without breaking the bank. From Brake Hose replacements to Brake Rotors and Drums upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1975 BMW 3.0Si at great prices. Our Brake Parts inventory for this model ranges from just $5.67 to $461.73, with an average price of $94.06. Our 7 Brake Parts in stock come from 3 trusted brands, so you’re sure to find the right part for your 1975 BMW 3.0Si without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 BMW 3.0Si, we stock popular OEM and aftermarket Brake Parts from top names like Carquest, and more. Carquest Brake Parts start at just $20.99 and boast an impressive 4 stars average rating from customers. With 1 customer reviews and counting, our 1975 BMW 3.0Si Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1975 BMW 3.0Si is always ready to roll. We’re committed to providing you with everything you need to keep your 3.0Si in top shape, all in one place. Start shopping confidently below for your 1975 BMW 3.0Si!

Best-Selling Brake Hoses for 1975 BMW 3.0Sis

Enhance the driving experience in your BMW with 2 quality Brake Hose components, starting at $20.99.

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38002)

Brake Hose Assembly: Copper Washers Included

from

$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA113300)

Brake Hose Assembly: Copper Washers Included

from

$20.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Most Popular 1975 BMW 3.0Si Brake Rotors and Drums

Customize your BMW with 1 Brake Rotors and Drums products like Rear Brake Rotors, all priced under $74.55.

ATE – Cod Brake Disc (Rotor) (Part No.N100078371ATE)

Cod Brake Disc (Rotor)

from

$74.55
ATE, a brand of Continental with more than 100 years of experience in brake development, is once again setting the standards in quality, innovation and system expertise. The high-carbon brake discs have a number of positive characteristics – they optimize durability and prevent, for example, brake judder and noise. With extremely low tolerances of max. 30 µm for lateral runout and max. 10 µm for thickness variation, ATE provides ideal aftermarket solutions in its role as a system supplier with OE expertise. The tolerances of the centering bores are also extremely low in order to prevent imbalance and radial runout. This contributes to extending the service life of the wheel suspension and wheel bearings. Depending on the vehicle model, mounting bolts are included with the brake discs at no extra charge. These mounting bolts are used to fix the brake disc to the wheel hub during installation. The bolt symbol on the brake disc label provides a clear indication that mounting bolts are included in the package. The mounting bolts included with ATE brake disc packages are always coated bolts, which reduces their susceptibility to corrosion and increases the longevity of the product. The MetaCote protective coating formulation is cured at approximately 572F. No grease or oil to remove. This helps protect against road salt, brake fluid and other corrosives – sheds water and dirt for clean appearance behind cast spoke wheels. Reduction in overall installation time.

Product Features:
  • OE-equivalent and a direct fit replacement.
  • Patented RotorLife wear indicator.
  • Optimum performance at all temperatures.
  • Reduced rotor wear.
  • less susceptible to noise and vibration.
  • MetaCote protective anti-corrosion coating.
See More

Top Picks for 1975 BMW 3.0Si Brake Hardware Parts

Upgrade BMW 3.0Sis with top-quality Brake Hardware Parts parts, including 1 OEM and aftermarket selections for your 1975 model.

FTE – Brake M/C Reservoir (Part No.N301727178FTE)

Brake M/C Reservoir

from

$5.67
Brake M/C Reservoir

In-Demand Brake Pads and Shoes for 1975 BMW 3.0Sis

Select from 1 premium Brake Pads and Shoes parts for your 1975 BMW 3.0Si.

ATE – Original OE Formuld Brake Pad Set (Part No.N101028643ATE)

Original OE Formuld Brake Pad Set

from

$46.94
ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking

Product Features:
  • OE engineered brake system technology assures optimum fit and performance
  • Advanced friction vehicle specific formulations
  • Reduced dusting and extend pad life
  • Application matched premium quality friction grade
  • Underlayer design helps reduce noise, vibration and harshness
  • Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation
See More

Most Sold 1975 BMW 3.0Si Brake Master Cylinders

Explore our best-selling BMW parts for the 1975 3.0Si among 2 OEM and aftermarket options starting from $27.55.

ATE – Brake Reservoir (Part No.N3010438841ATE)

Brake Reservoir

from

$27.55
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers.
See More

ATE – ATE Brake Master Cylinder (Part No.N300019752ATE)

ATE Brake Master Cylinder

from

$461.73
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

Top-Rated Brake Parts Brands For Your 1975 BMW 3.0Si

Shop for the best-rated brands offering Brake Parts and other products for your 1975 BMW 3.0Sis. Below you’ll find some of our best rated Brake Parts from Carquest, and more. Brake Parts from these brands that fit a 1975 3.0Si start at just $20.99 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1975 BMW 3.0Si Brake Parts

When it comes to maintaining or upgrading your 1975 BMW 3.0Si, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1975 BMW 3.0Si. With over 2 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $20.99. Plus, with over 1 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Brake Hose Assembly: Copper Washers Included
from
$20.99

(1)

Brake Hose Assembly: Copper Washers Included

“Though this part is listed as fitting a 1998 volvo V70 FWD, it does not, as this model has metal brake lines. It might be intended for the V70 AWD. Lo”

Brake Hose Assembly: Copper Washers Included
from
$20.99
This product is not rated

Brake Hose Assembly: Copper Washers Included

“”

FAQs for 1975 BMW 3.0Si Brake Parts

Which Brake Parts are best-sellers for 1975 BMW 3.0Sis?

Out of 7 Brake Parts that fit 1975 BMW 3.0Sis, the following parts are the top sellers:

What’s the price range for 1975 BMW 3.0Si Brake Parts?

Brake Part prices for the 1975 BMW 3.0Si start at $5.67 and go up to $461.73 for the most premium parts.

What’s the average price of a Brake Part for a 1975 BMW 3.0Si?

The average price for Brake Parts for the 1975 BMW 3.0Si is $94.06. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other BMW 3.0Si model years?

Yes, we currently carry Brake Parts for 2 model years of BMW 3.0Sis between 1971 and 1976. Brake Parts are bought most frequently for the following model years: 1976 and 1971.

What are the cheapest Brake Parts for my 1975 BMW 3.0Si?

The cheapest 1975 BMW 3.0Si Brake Parts we carry in stock are:

What are the top-rated Brake Parts that fit the 1975 BMW 3.0Si?

Out of 1 reviews by customers, our 1975 BMW 3.0Si Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1975 BMW 3.0Si and their top-rated products:

What types of Brake Parts do you sell for my 1975 BMW 3.0Si?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1975 BMW 3.0Si:

Can I get help with 1975 BMW 3.0Si Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Brake Parts and more.

What is your return policy for BMW 3.0Si Brake Parts?

Advance Auto Parts keeps returns simple. For new BMW 3.0Si Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.