1974 Subaru DL Ignition and Tune-Up Products
More 1974 Subaru DL Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1974 Subaru DL, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1974 Subaru DL Ignition and Tune-Up Products
Intermotor Red Wire – Spark Plug Wire Set (Part No.50975)
from
$34.99
Spark Plug Wire Set
NGK – Ignition Wire Set (Part No.F1020115872NGK)
from
$26.88
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4008)
from
$32.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – Ignition Wire Set (Part No.F102088175NGK)
from
$28.99
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
YEC – YEC Distributor Cap (Part No.F201068218YEC)
from
$8.74
YEC Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.
Product Features:
See More
Product Features:
- Superior Surface Finish
- RFI Suppression
- Precision-machined Contacts
- Finely -tooled Metal Mounting Sleeve
Bosch – Bosch Distributor Cap (Part No.F201013140BOS)
from
$15.26
Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.
Product Features:
See More
Product Features:
- Superior Surface Finish
- RFI Resistors (Asian) / RFI Suppression (European)
- Installation Screws
- Precision-machined Contacts
- Finely -tooled Metal Mounting Sleeve (Asian)
Carquest Premium – Distributor Cap (Part No.CAC1449)
from
$12.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
YEC – YEC Distributor Cap (Part No.F201053114YEC)
from
$13.23
YEC Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.
Product Features:
See More
Product Features:
- Superior Surface Finish
- RFI Suppression
- Precision-machined Contacts
- Finely -tooled Metal Mounting Sleeve
Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP63)
from
$4.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.
Product Features:
See More
Product Features:
- High nickel alloy side electrode maintains precise gap
- Full platinum tip assures virtually no gap erosion for long life
- Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
Champion – Iridium Spark Plug: Maximum Performance, OE Replacement, RN10WYPB5 (Part No.9007)
from
$8.29
Champion Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.
Product Features:
See More
Product Features:
- Champion Iridium – Maximum Performance. Premium Spark Plug
- Iridium center electrode delivers maximum life
- Fine-wire center electrode and V-trimmed for greater ignitability
- V-trimmed ground electrode promotes sharper spark focus
- Maintains stable operating temperature under all engine loads
- Heat-Active alloy allows electrodes to reach optimal temperature quickly
Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RN9YC (Part No.415)
from
$4.49
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
- Built to ISO and SAE standards for proven performance
Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP63)
from
$6.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.
Product Features:
See More
Product Features:
- Works to optimize engine performance for a longer life and improved fuel economy
- OE design
- Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
- Platinum ball welding process provides a consistent point of contact for enhanced adhesion
Carquest – DISTRIBUTOR ROTOR (Part No.D559)
from
$5.05
Intermotor is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor is the import leader by design.
Product Features:
See More
Product Features:
- High dielectric-strength engineering polymer prevents breakdown or arcing and ensures long life
- Solid brass segment resists pitting and erosion for extended life
- Utilizes shaft retention clips for proper fit of distributor shaft
- As a global manufacturer of ignition products, we maintain complete quality control throughout the manufacturing process, from componentry to finished product
YEC – YEC Distributor Rotor (Part No.F202032139YEC)
from
$6.24
YEC Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.
Product Features:
See More
Product Features:
- Superior Surface Finish
- RFI Suppression
- Precision-machined Contacts
- Finely -tooled Metal Mounting Sleeve
Carquest Premium – Distributor Rotor (Part No.DAA1149)
from
$4.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Rotor (Part No.DAA1147)
from
$3.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Condenser (Part No.GAA1147)
from
$7.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Contact Set and Condenser Kit (Part No.ANA1122)
from
$9.79
Ignition Contact Set and Condenser Kit
Carquest Premium – Ignition Condenser (Part No.GAA1175)
from
$4.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Contact Set (Part No.ANA1005)
from
$6.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Ignition Coil (Part No.26C1078)
from
$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.
Product Features:
See More
Product Features:
- High output
- Long spark duration
- High dielectric strength
- Corrosion resistant connections
- High reliability
- Long service life
Driveworks – Ignition Coil (Part No.26189)
from
$35.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1629)
from
$83.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1543)
from
$29.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)
from
$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1974 Subaru DL Ignition and Tune-Up Products Categories
1974 Subaru DL Ignition and Tune-Up Products
You count on your 1974 Subaru DL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 30 Ignition and Tune-Up Products ranging in price from $2.99 to $61.99, you’re sure to find everything you need for your 1974 Subaru DL.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 11 different brands like NGK, Champion, and E3. 1974 Subaru DL Ignition and Tune-Up Products start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 225 extensive product reviews on 1974 Subaru DL Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 4.9 stars and Ignition Wire Set with 4.3 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1974 Subaru DL below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1974 Subaru DL
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 Subaru DL running right for years to come. In our inventory you’ll find brands like NGK, Champion, E3, and even more.
Popular ACDelco Ignition and Tune-Up Products
You’ll find popular ACDelco brand products across Spark Plugs. All are waiting to get your 1974 Subaru DL back on the road. Some of the top-rated ACDelco products in these categories are:
Top-Rated NGK Ignition and Tune-Up Products
If NGK are what you’re looking for, our inventory holds plenty. We stock NGK brand Ignition and Tune-Up Products for your 1974 Subaru DL, and some of our most reviewed NGK parts include:
FAQs for 1974 Subaru DL Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1974 Subaru DL?
Out of 30 Ignition and Tune-Up Products for the 1974 Subaru DL, the most popular in our inventory are:
What are the top-rated 1974 Subaru DL Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1974 Subaru DL based on customer reviews/ratings are:
from
$3.49
(12)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“Replaced my old plug and generator fired right up. Excellent recommendation by the service desk. Thanks.”
from
$26.88
(4)
Ignition Wire Set
“Replacement for Acura MDX 2015 windshiel washer pump. Works just fine so far. It is color coded for the orientation of the front and back nozzle just”
