1974 Plymouth PB300 Van Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1974 Plymouth PB300 Vans

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Electric Fuel Pump

from

$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • They Make An Excellent Fuel Transfer or Booster Pump
  • Not designed for use on aircraft of any type.
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

Carquest Premium – Mechanical Fuel Pump 360592: Includes Gasket (Part No.360592)

Mechanical Fuel Pump 360592: Includes Gasket

from

$24.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

KAI – Fuel Pump Module Assembly (Part No.FMD010083)

Fuel Pump Module Assembly

from

$62.99
New Platinum Pro Fuel Pump Module

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Cardone – Remanufactured Smog Air Pump (Part No.32-101)

Remanufactured Smog Air Pump

from

$157.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.

Product Features:
  • 100% testing of all units guarantees reliable performance every time.
  • High temperature grease extends bearing life, resulting in longer pump life.
  • New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards.
  • Guaranteed fit and function.
  • Meets or exceeds O.E.M performance.
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)

Secondary Air Injection Pump Check Valve

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Spectra Premium – Fuel Tank (Part No.CR4B)

Fuel Tank

from

$364.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1188)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$18.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1018)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$1.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Fuel Pump Lock Ring (Part No.579-006)

Fuel Pump Lock Ring

from

$8.99
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:
  • Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
  • Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spectra Premium – Fuel Tank Lock Ring (Part No.LO06)

Fuel Tank Lock Ring

from

$5.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium lock rings meet or exceed the performance of the original equipment they replace.

Product Features:
  • Lock ring should be replaced when changing the fuel tank or fuel module
  • Application specific design ensure a perfect fit guarantee
  • OEM fit, form and function
  • OEM design ensures corrosion resistance and prevents leakage from the fuel tank
  • Manufactured with high quality material, ensuring the durability of this part to prevent costly leaks
See More

Carquest Premium – Fuel Cap: 10742, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10742)

Fuel Cap: 10742, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$9.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10571)

Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Upgrade your 1974 Plymouth PB300 Van with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1974 Plymouth PB300 Van, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Plymouth or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your PB300 Van functioning at its best. At Advance Auto Parts, we offer a wide selection of 13 Fuel and Emissions Systems for the 1974 Plymouth PB300 Van, designed to meet your needs without breaking the bank. From Smog Part replacements to Fuel Tanks upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1974 Plymouth PB300 Van at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.29 to $364.99, with an average price of $60.02. Our 13 Fuel and Emissions Systems in stock come from 7 trusted brands, so you’re sure to find the right part for your 1974 Plymouth PB300 Van without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1974 Plymouth PB300 Van, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium Mr. Gasket, and more. Carquest Premium Fuel and Emissions Systems start at just $1.29 and boast an impressive 4 stars average rating from customers. With 672 customer reviews and counting, our 1974 Plymouth PB300 Van Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1974 Plymouth PB300 Van is always ready to roll. We’re committed to providing you with everything you need to keep your PB300 Van in top shape, all in one place. Start shopping confidently below for your 1974 Plymouth PB300 Van!

Best-Selling Smog Parts for 1974 Plymouth PB300 Vans

Enhance the driving experience in your Plymouth with 1 quality Smog Part components, starting at $157.99.

Cardone – Remanufactured Smog Air Pump (Part No.32-101)

Remanufactured Smog Air Pump

from

$157.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.

Product Features:
  • 100% testing of all units guarantees reliable performance every time.
  • High temperature grease extends bearing life, resulting in longer pump life.
  • New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards.
  • Guaranteed fit and function.
  • Meets or exceeds O.E.M performance.
See More

Most Popular 1974 Plymouth PB300 Van Fuel Tanks

Customize your Plymouth with 4 Fuel Tanks products like Fuel Tanks, Fuel Tank Lock Rings, and Fuel Tank Cleaning Kits, all priced under $364.99.

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest – Fuel Pump Lock Ring (Part No.579-006)

Fuel Pump Lock Ring

from

$8.99
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:
  • Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
  • Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spectra Premium – Fuel Tank Lock Ring (Part No.LO06)

Fuel Tank Lock Ring

from

$5.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium lock rings meet or exceed the performance of the original equipment they replace.

Product Features:
  • Lock ring should be replaced when changing the fuel tank or fuel module
  • Application specific design ensure a perfect fit guarantee
  • OEM fit, form and function
  • OEM design ensures corrosion resistance and prevents leakage from the fuel tank
  • Manufactured with high quality material, ensuring the durability of this part to prevent costly leaks
See More

Spectra Premium – Fuel Tank (Part No.CR4B)

Fuel Tank

from

$364.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Top Picks for 1974 Plymouth PB300 Van Exhaust Gas Recirculation (EGR) Parts

Upgrade Plymouth PB300 Vans with top-quality Exhaust Gas Recirculation (EGR) Parts parts, including 2 OEM and aftermarket selections for your 1974 model.

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1188)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$18.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1018)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$1.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

In-Demand Fuel Pumps for 1974 Plymouth PB300 Vans

Select from 3 premium Fuel Pumps parts for your 1974 Plymouth PB300 Van, with prices ranging from $24.99 to $64.99.

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Electric Fuel Pump

from

$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • They Make An Excellent Fuel Transfer or Booster Pump
  • Not designed for use on aircraft of any type.
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

Carquest Premium – Mechanical Fuel Pump 360592: Includes Gasket (Part No.360592)

Mechanical Fuel Pump 360592: Includes Gasket

from

$24.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

KAI – Fuel Pump Module Assembly (Part No.FMD010083)

Fuel Pump Module Assembly

from

$62.99
New Platinum Pro Fuel Pump Module

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Most Sold 1974 Plymouth PB300 Van Gas Caps

Explore our best-selling Plymouth parts for the 1974 PB300 Van among 2 OEM and aftermarket options starting from $9.99.

Carquest Premium – Fuel Cap: 10742, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10742)

Fuel Cap: 10742, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$9.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10571)

Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Top-Rated Fuel and Emissions Systems Brands For Your 1974 Plymouth PB300 Van

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1974 Plymouth PB300 Vans. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium and Mr. Gasket, and more. Fuel and Emissions Systems from these brands that fit a 1974 PB300 Van start at just $1.29 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1974 Plymouth PB300 Van Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1974 Plymouth PB300 Van, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 1974 Plymouth PB300 Van. With over 6 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.29, with an average price of just $19.71. Plus, with over 5 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Exhaust Gas Recirculation (EGR) Valve Gasket
from
$18.99
This product is not rated

Exhaust Gas Recirculation (EGR) Valve Gasket

“”

Mechanical Fuel Pump 360592: Includes Gasket
from
$24.99
This product is not rated

Mechanical Fuel Pump 360592: Includes Gasket

“”

Secondary Air Injection Pump Check Valve
from
$39.99
This product is not rated

Secondary Air Injection Pump Check Valve

“”

Popular Mr. Gasket 1974 Plymouth PB300 Van Fuel and Emissions Systems

Mr. Gasket auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1974 Plymouth PB300 Van owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1974 PB300 Van, Advance Auto Parts carries a full inventory of 1 Mr. Gasket Fuel and Emissions Systems. Plus you will be keeping your Plymouth in peak condition while saving money because prices on these Mr. Gasket Fuel and Emissions Systems range up to $64.99, plus, with more than 37 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Electric Fuel Pump
from
$64.99

(37)

Electric Fuel Pump

“It works as advertised.”

FAQs for 1974 Plymouth PB300 Van Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1974 Plymouth PB300 Vans?

Out of 13 Fuel and Emissions Systems that fit 1974 Plymouth PB300 Vans, the following parts are the top sellers:

What’s the price range for 1974 Plymouth PB300 Van Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1974 Plymouth PB300 Van start at $1.29 and go up to $364.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1974 Plymouth PB300 Van?

The average price for Fuel and Emissions Systems for the 1974 Plymouth PB300 Van is $60.02. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

What are the cheapest Fuel and Emissions Systems for my 1974 Plymouth PB300 Van?

The cheapest 1974 Plymouth PB300 Van Fuel and Emissions Systems we carry in stock are:

What types of Fuel and Emissions Systems do you sell for my 1974 Plymouth PB300 Van?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1974 Plymouth PB300 Van:

Can I get help with 1974 Plymouth PB300 Van Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Plymouth Fuel and Emissions Systems and more.

What is your return policy for Plymouth PB300 Van Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Plymouth PB300 Van Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.