1974 Oldsmobile Omega Differentials

Essential 1974 Oldsmobile Omega Differentials

Yukon Gear – Dura Grip Positraction For GM 7.625" With 28 Spline Axles, 3.23 & Up (Part No.26018)

Dura Grip Positraction For GM 7.625" With 28 Spline Axles, 3.23 & Up

from

$829.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 7.625″ with 28 spline axles
  • 3.23 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

FAG US – TAPERED ROLLER BEARI (Part No.KT5)

TAPERED ROLLER BEARI

from

$16.49
TAPERED ROLLER BEARI

Yukon Gear – Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up (Part No.20106)

Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up

from

$399.99
GM 7.5″ & 7.6″ DURA GRIP case, bare, 3.23 & up, 26spline & 28spline.

Product Features:
  • Dura Grip positraction carrier case
  • Does not include spider gears
  • Fits GM 7.5″ and 7.625″
  • 3.23 and up ratios only
See More

Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

Pinion Install Kit For GM 8.5" Differential

from

$173.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.5″ rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

8.5" & 8.2" GM Carrier Installation Kit

from

$109.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – Positraction Internals For 8.5" GM With 28 Spline Axles (Part No.16052)

Positraction Internals For 8.5" GM With 28 Spline Axles

from

$336.99
Yukon positraction internals (0.795″ diameter) for 8.5″ GM with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. This kit is compatible with Yukon Dura Grip or Eaton positractions. It will not fit a factory Gov-Loc positraction.

Product Features:
  • Spider gear kit
  • Fits GM 8.5″ with 28 spline Dura Grip positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – 18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16110)

18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$483.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 18 piece kit
  • Steel clutches
See More

Motive Gear – Differential Gear Install Kit (Part No.GM7.5IK)

Differential Gear Install Kit

from

$49.99


Product Features:
  • MINI INSTALL KIT GM 7.5
See More

Yukon Gear – Crush Sleeve Eliminator Kit For GM 7.5" & 8.2" (Part No.55047)

Crush Sleeve Eliminator Kit For GM 7.5" & 8.2"

from

$40.99
Product Features:
  • Crush sleeve eliminator kit for GM 7.5″, 7.625″ and 8.2″
See More

Yukon Gear – Mini Spool For GM 8.5" With 28 Spline Axles (Part No.32232)

Mini Spool For GM 8.5" With 28 Spline Axles

from

$165.99
10 bolt Mini Spool for 8.5″ GM with 28 spline axles. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″ with 28 spline axles
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Motive Gear – Pinion Nut (Part No.1260823)

Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Yukon Gear – GM 7.5" Standard Open Side Gear Thrust Washer (Part No.33389)

GM 7.5" Standard Open Side Gear Thrust Washer

from

$11.99
GM 7.5″ standard Open side gear thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 7.5″
See More

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

from

$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:
  • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
See More

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Differential Mini Spool

from

$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – 8.2" & 8.5" Rear Cover Gasket (Part No.23020)

8.2" & 8.5" Rear Cover Gasket

from

$10.99
8.2″ & 8.5″ rear cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 8.2″, 8.5″ and 8.6″
See More

Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

Clutch Guide For GM 7.5" & 7.6" Dura Grip

from

$10.99
Product Features:
  • Clutch guide
  • Fits GM 7.5″ and 7.625″ Dura Grip
See More

Motive Gear – Axle Shaft (Part No.MG1010)

Axle Shaft

from

$119.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:
  • AXLE SHAFT 8.2″ 28 SPL. 29 5/8″ L&R DOUBLE DRILLED
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Pro-King – Differential Bearing Cup (Part No.742G256)

Differential Bearing Cup

from

$8.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – 7.2" GM 7.5" GM & 8.2" GM Pinion Seal (Part No.30192)

7.2" GM 7.5" GM & 8.2" GM Pinion Seal

from

$9.99
7.2″ GM 7.5″ GM & 8.2″ GM pinion seal.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits GM 7.2″ IFS, 1999 and down GM 7.5″ and 7.625″ and GM 8.2″
  • 2.660″ O.D.
See More

Yukon Gear – Bearing Install Kit For GM 8.5" With HD Differential (Part No.11069)

Bearing Install Kit For GM 8.5" With HD Differential

from

$263.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.

Product Features:
  • Fits GM 8.5″ rear with aftermarket positraction
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal (Part No.41210)

Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal

from

$25.99
Yukon 4340 Chrome-Moly replacement outer stub for D44 ’87-’94 Wrangler with a length of 8.31″ and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • 27 spline
  • 8.31″ long
  • Fits Dana Spicer 30 in 1987-1994 Wrangler
  • Outer stub
  • 5-760X U-joint size
  • 4340 Chromoly
  • For WARN hub conversion only
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Pro-King – Differential Pinion Yoke Washer (Part No.742A215)

Differential Pinion Yoke Washer

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

1974 Oldsmobile Omega Differentials

Maybe you’re in the middle of a full rebuild of that 1974 Oldsmobile Omega. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 151 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1974 Oldsmobile Omega running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1974 Oldsmobile Omega. Valvoline, FELPRO, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1974 Oldsmobile Omega, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 908 reviews in this category, some of the top rated parts include Differential Master Bearing Kit – Koyo with 3.8 stars and Differential Ring and Pinion with 4.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 1974 Oldsmobile Omega rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1974 Oldsmobile Omega Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 Oldsmobile Omega demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Omega the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1974 Oldsmobile Omega, our most popular Driveworks Differentials include:
Oil Seal
from $7.79
(1)
Oil Seal
Differential Pinion Seals

Top 1974 Oldsmobile Omega Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1974 Oldsmobile Omega. Popular Felpro parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1974 Oldsmobile Omega Differentials

What are the most purchased Differentials for the 1974 Oldsmobile Omega?

Out of 151 Differentials for the 1974 Oldsmobile Omega, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings

What are the top-rated 1974 Oldsmobile Omega Differentials?

Top-rated Differentials for your 1974 Oldsmobile Omega based on customer reviews/ratings are:
Differential Master Bearing Kit - Koyo
from $156.99
(5)
Differential Master Bearing Kit – Koyo
“was delivered as promised and on time”
Differential Ring and Pinion
from $241.99
(4)
Differential Ring and Pinion
“Perfect match and easy install”
Differential Carrier Shim Kit
from $8.49
(3)
Differential Carrier Shim Kit
“worked great”