1974 Oldsmobile Omega Steering and Chassis Parts
More 1974 Oldsmobile Omega Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1974 Oldsmobile Omega, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1974 Oldsmobile Omega Steering and Chassis Parts
Lares – Remanufactured Power Steering Gear Box (Part No.1105)
from
$509.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Lares – New Steering Coupling Assembly (Part No.200)
from
$50.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More
MOOG – Idler Arm (Part No.K6099)
from
$127.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Heavy-duty design
- Loose or worn chassis parts can lead to premature tire wear
- Engineered steel composition results in a stronger component
- Powdered metal gusher bearing design enables grease to flow through bearing to
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
National – Multi Purpose Seal (Part No.7013S)
from
$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Suspension Stabilizer Bar Link Kit (Part No.DW-K5252)
from
$9.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$47.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.7095)
from
$31.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Tie Rod End (Part No.ES427R)
from
$41.49
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Lares – New Steering Coupling Assembly (Part No.201)
from
$50.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More
National – Multi Purpose Seal (Part No.313842)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Lakewood – J BOLT (Part No.20580)
from
$75.99
J BOLT
National – Multi Purpose Seal (Part No.351267)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Carquest Premium – Ball Joint (Part No.400-65007)
from
$48.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hardware included for easier installation (where applicable)
Carquest Premium – Pressure Hose Assembly (Part No.35536)
from
$59.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
MOOG – Ball Joint (Part No.K6145T)
from
$53.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Rare Parts – Sway Bar Link Kit (Part No.RP22194)
from
$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Carquest Premium – Return Hose Assembly (Part No.35847)
from
$19.29
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Rare Parts – Sway Bar Bushing (Part No.RP15311)
from
$28.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Powercraft – Steering Gear Major Seal Kit (Part No.7860)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Help – Power Steering Caps (Part No.82581)
from
$5.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Powercraft – Steering Gear Complete Rebuild Kit (Part No.8529)
from
$89.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Tie Rod End (Part No.DW-ES350S)
from
$6.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8767)
from
$48.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
ACDelco – Ignition Switch (Part No.D1404B)
from
$31.99
An ACDelco GM Original Equipment Ignition Starter Switch is a GM-recommended replacement for your vehicle’s original component. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. This original equipment ignition starter switch has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Work with vehicle electronics to help optimize vehicle capabilities
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
MOOG – Pitman Arm (Part No.K6151)
from
$119.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Heavy duty design
- Engineered steel composition results in a stronger component
- Loose or worn chassis parts can lead to premature tire wear
- Exclusive cover plate protects against contaminants leaking into the bearing surface
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Popular 1974 Oldsmobile Omega Steering and Chassis Parts Categories
1974 Oldsmobile Omega Steering and Chassis Parts
You count on your 1974 Oldsmobile Omega to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 77 Steering and Chassis Parts ranging in price from $2.49 to $868.99, you’re sure to find everything you need for your 1974 Oldsmobile Omega.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 17 different brands like Imperial, Carquest Premium, and Cardone. 1974 Oldsmobile Omega Steering and Chassis Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,590 extensive product reviews on 1974 Oldsmobile Omega Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bearings with 4.7 stars and Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1974 Oldsmobile Omega below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1974 Oldsmobile Omega
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 Oldsmobile Omega running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.
Popular Energy Suspension Steering and Chassis Parts
You’ll find popular Energy Suspension brand products across Tie Rods and Sway Bars. All are waiting to get your 1974 Oldsmobile Omega back on the road. Some of the top-rated Energy Suspension products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1974 Oldsmobile Omega, and some of our most reviewed Imperial parts include:
FAQs for 1974 Oldsmobile Omega Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1974 Oldsmobile Omega?
Out of 77 Steering and Chassis Parts for the 1974 Oldsmobile Omega, the most popular in our inventory are:
from
$5.99
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
from
$2.49
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Reservoir Hoses
What are the top-rated 1974 Oldsmobile Omega Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1974 Oldsmobile Omega based on customer reviews/ratings are:
from
$53.99
(14)
Pump Complete Rebuild Kit
“No complaints had all seals and o rings needed for the rebuild”
