1974 Oldsmobile Custom Cruiser Flywheels
More 1974 Oldsmobile Custom Cruiser Flywheels
Find your specific 1974 Oldsmobile Custom Cruiser original or aftermarket Flywheels below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1974 Oldsmobile Custom Cruiser Flywheels
Lakewood – Power Train (Part No.RM-922)
from
$121.99
Power Train
Lakewood – Power Train (Part No.RM-902)
from
$193.99
Power Train
Lakewood – Power Train (Part No.RM-931)
from
$117.99
Power Train
Lakewood – Power Train (Part No.RM-901)
from
$218.99
Power Train
Hays – Power Train (Part No.10-010)
from
$135.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:
See More
Product Features:
- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-111)
from
$35.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Lakewood – Power Train (Part No.RM-925)
from
$172.99
Power Train
Hays – Power Train (Part No.10-630)
from
$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Lakewood – Power Train (Part No.RM-920)
from
$229.99
Power Train
Lakewood – Power Train (Part No.RM-930)
from
$207.99
Power Train
ATP – AT HD FLEX PLATE (Part No.Z-460)
from
$60.99
AT HD FLEX PLATE
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-116)
from
$67.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-165)
from
$66.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Hays – Flexplate: Chevy 57-85 (153T) (Part No.10-012)
from
$145.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:
See More
Product Features:
- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
B & M – Flexplate, 168 Tooth 86-94 Chevrolet Small Block (Part No.20239)
from
$181.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1986 to 1994 GM (externally balanced) 4.3L V6 and GM small block V8 engines with one piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
ATP – Automatic Transmission Flex Plate (Part No.Z-166)
from
$47.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – AT HD FLEX PLATE (Part No.Z-463)
from
$121.99
AT HD FLEX PLATE
Popular 1974 Oldsmobile Custom Cruiser Flywheels Categories
1974 Oldsmobile Custom Cruiser Flywheels
Maybe you’re in the middle of a full rebuild of that 1974 Oldsmobile Custom Cruiser. Maybe you just need a couple of Flywheels. Either way, Advance Auto Parts has 1 different Flywheels in our inventory priced around $67.99. That means you can find the exact parts or products you need to keep that 1974 Oldsmobile Custom Cruiser running smoothly.
Flywheels are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 1974 Oldsmobile Custom Cruiser. ATP are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Flywheels for your 1974 Oldsmobile Custom Cruiser, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Flywheels to keep your 1974 Oldsmobile Custom Cruiser rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Flywheels Brands To Make Your 1974 Oldsmobile Custom Cruiser Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 Oldsmobile Custom Cruiser demands trusted brand parts and products to keep it running. Many trusted brands of Flywheels make up Advance Auto Parts’ inventory, and all are ready to help make your Custom Cruiser the best it can be. Be sure to browse some of our top Flywheels brands and parts.
