1974 Mercury Marquis Clutch Systems

Essential Clutch Systems for 1974 Mercury Marquis

ATP – FLYWHEEL SHIM (Part No.FS-5)

FLYWHEEL SHIM

from

$25.99
FLYWHEEL SHIM

ATP – FLYWHEEL SHIM (Part No.FS-10)

FLYWHEEL SHIM

from

$25.99
FLYWHEEL SHIM

ATP – FLYWHEEL SHIM (Part No.FS-4)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

ARP Auto Racing – ARP Pressure Plate Clutch Cover Bolt Kit (Part No.250-2201)

ARP Pressure Plate Clutch Cover Bolt Kit

from

$13.99
ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 psi. The Pro Series bolts, originally developed for NASCAR competition, are rated at 200,000 psi. Both models feature a large diameter, low-profile head design. Complete with washers, where applicable.

Product Features:
  • 1/2″ 12-Point Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • 1985 & Earlier Ford 289-460 V8
  • 5/16″-18 Thread Size
  • 200,000 PSI
  • 0.78″ Underhead Length
  • Sold As A Kit
See More

ARP Auto Racing – For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile (Part No.150-2201)

For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile

from

$14.99
The importance of pressure plate bolts in a racing or Hi Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:
  • High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
  • Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
  • Large Diameter, Low Profile Design
  • Complete With Washers
  • 180,000 PSI
  • Sold As A Kit
  • 0.78″ Underhead Length
See More

Lakewood – Bellhousing: Ford 289-351 (Part No.15200)

Bellhousing: Ford 289-351

from

$999.99
Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.

Product Features:
  • Hydroformed From Premium Quality Steel
  • Uniform Thickness For Superior Strength
  • Mig-Welded Threaded Inserts
  • Stress Relief In A Stronger/Safer Bellhousing
  • Precision Machined Assures Proper Bolt Hole
  • Includes Block Plate And Hardware
  • Approved By Major Racing Sanctioning Bodies
  • Meets SFI 6.1 Specifications
See More

Lakewood – Block Plate For 15210 (Part No.15741)

Block Plate For 15210

from

$218.99
Exact replacement safety block plates meet S.F. I. safety requirements. A must for block protection and required by most racing associations.

Product Features:
  • A Must For Block Protection
  • Required By Most Racing Associations
  • Must Be Used To Meet S.F.I Safety Requirements
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPF9)

Differential Cross Shaft

from

$26.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Richmond Gear – Differential Cross Shaft (Part No.80-0273-1)

Differential Cross Shaft

from

$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPF88L)

Differential Cross Shaft

from

$26.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

B & M – Flexplate (Part No.50237)

Flexplate

from

$158.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for Ford, Lincoln and Mercury (externally balanced) 289 and 302ci V8 engines with 28.2 ounce imbalance. Features include high tensile strength steel to resist elongation and cracking, 11.4 inch bolt pattern and 164 tooth ring gear. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M flexplates are ideal for hot rods, street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with C4 and C6 automatic transmissions.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

ATP – Automatic Transmission Flex Plate (Part No.Z-105)

Automatic Transmission Flex Plate

from

$66.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

Hays – Power Train (Part No.12-240)

Power Train

from

$628.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

Hays – Flywheels (Part No.12-242)

Flywheels

from

$495.99
Flywheels

ATP – ATP Automatic Transmission Flex Plate (Part No.Z-106)

ATP Automatic Transmission Flex Plate

from

$50.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

ATP – Automatic Transmission Flex Plate (Part No.Z-158)

Automatic Transmission Flex Plate

from

$81.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

ATP – ATP Automatic Transmission Flex Plate (Part No.Z-242)

ATP Automatic Transmission Flex Plate

from

$128.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

Hays – Flywheel: Late Ford 28Lb Steel (Part No.12-540)

Flywheel: Late Ford 28Lb Steel

from

$412.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

ATP – Automatic Transmission Flex Plate (Part No.Z-157)

Automatic Transmission Flex Plate

from

$79.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

ATP – ATP Automatic Transmission Flex Plate (Part No.Z-110)

ATP Automatic Transmission Flex Plate

from

$72.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

Upgrade your 1974 Mercury Marquis with Top-Quality Clutch Systems

When it comes to maintaining or upgrading your 1974 Mercury Marquis, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Clutch Systems are key to keeping your Marquis functioning at its best. At Advance Auto Parts, we offer a wide selection of 8 Clutch Systems for the 1974 Mercury Marquis, designed to meet your needs without breaking the bank. From Flywheel replacements to Clutch Bellcranks upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 1974 Mercury Marquis at great prices. Our Clutch Systems inventory for this model ranges from just $13.99 to $628.99, with an average price of $151.63. Our 8 Clutch Systems in stock come from 6 trusted brands, so you’re sure to find the right part for your 1974 Mercury Marquis without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1974 Mercury Marquis is always ready to roll. We’re committed to providing you with everything you need to keep your Marquis in top shape, all in one place. Start shopping confidently below for your 1974 Mercury Marquis!

Best-Selling Flywheels for 1974 Mercury Marquis

Enhance the driving experience in your Mercury with 4 quality Flywheel components, starting at $25.99.

ATP – ATP Automatic Transmission Flex Plate (Part No.Z-106)

ATP Automatic Transmission Flex Plate

from

$50.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

Hays – Power Train (Part No.12-240)

Power Train

from

$628.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

B & M – Flexplate (Part No.50237)

Flexplate

from

$158.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for Ford, Lincoln and Mercury (externally balanced) 289 and 302ci V8 engines with 28.2 ounce imbalance. Features include high tensile strength steel to resist elongation and cracking, 11.4 inch bolt pattern and 164 tooth ring gear. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M flexplates are ideal for hot rods, street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with C4 and C6 automatic transmissions.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

ATP – FLYWHEEL SHIM (Part No.FS-10)

FLYWHEEL SHIM

from

$25.99
FLYWHEEL SHIM

Most Popular 1974 Mercury Marquis Clutch Bellcranks

Customize your Mercury with 1 Clutch Bellcranks products like Clutch Bellcrank Retaining Pins, all priced under $26.49.

Richmond Gear – Differential Cross Shaft (Part No.CSPF9)

Differential Cross Shaft

from

$26.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Top Picks for 1974 Mercury Marquis Clutch Bell Housings

Upgrade Mercury Marquis with top-quality Clutch Bell Housings parts, including 1 OEM and aftermarket selections for your 1974 model.

Lakewood – Block Plate For 15210 (Part No.15741)

Block Plate For 15210

from

$218.99
Exact replacement safety block plates meet S.F. I. safety requirements. A must for block protection and required by most racing associations.

Product Features:
  • A Must For Block Protection
  • Required By Most Racing Associations
  • Must Be Used To Meet S.F.I Safety Requirements
See More

In-Demand Clutch Pressure Plates for 1974 Mercury Marquis

Select from 2 premium Clutch Pressure Plates parts for your 1974 Mercury Marquis, with prices ranging from $13.99 to $14.99.

ARP Auto Racing – For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile (Part No.150-2201)

For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile

from

$14.99
The importance of pressure plate bolts in a racing or Hi Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:
  • High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
  • Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
  • Large Diameter, Low Profile Design
  • Complete With Washers
  • 180,000 PSI
  • Sold As A Kit
  • 0.78″ Underhead Length
See More

ARP Auto Racing – ARP Pressure Plate Clutch Cover Bolt Kit (Part No.250-2201)

ARP Pressure Plate Clutch Cover Bolt Kit

from

$13.99
ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 psi. The Pro Series bolts, originally developed for NASCAR competition, are rated at 200,000 psi. Both models feature a large diameter, low-profile head design. Complete with washers, where applicable.

Product Features:
  • 1/2″ 12-Point Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • 1985 & Earlier Ford 289-460 V8
  • 5/16″-18 Thread Size
  • 200,000 PSI
  • 0.78″ Underhead Length
  • Sold As A Kit
See More

FAQs for 1974 Mercury Marquis Clutch Systems

Which Clutch Systems are best-sellers for 1974 Mercury Marquis?

Out of 8 Clutch Systems that fit 1974 Mercury Marquis, the following parts are the top sellers:

What’s the price range for 1974 Mercury Marquis Clutch Systems?

Clutch System prices for the 1974 Mercury Marquis start at $13.99 and go up to $628.99 for the most premium parts.

What’s the average price of a Clutch System for a 1974 Mercury Marquis?

The average price for Clutch Systems for the 1974 Mercury Marquis is $151.63. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Clutch Systems for other Mercury Marquis model years?

Yes, we currently carry Clutch Systems for 19 model years of Mercury Marquis between 1967 and 1986. Clutch Systems are bought most frequently for the following model years: 1986, 1985, 1984, 1983, 1982, 1981, 1980, 1979, and 1978.

What are the cheapest Clutch Systems for my 1974 Mercury Marquis?

The cheapest 1974 Mercury Marquis Clutch Systems we carry in stock are:

What types of Clutch Systems do you sell for my 1974 Mercury Marquis?

As of 2/5/25, these are some of the most in-demand types of Clutch Systems for a 1974 Mercury Marquis:

Can I get help with 1974 Mercury Marquis Clutch System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Clutch Systems and more.

What is your return policy for Mercury Marquis Clutch Systems?

Advance Auto Parts keeps returns simple. For new Mercury Marquis Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.