1974 GMC G15/G1500 Van Differentials

Essential 1974 GMC G15/G1500 Van Differentials

Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)

Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75"

from

$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
  • 3/4″ x 16 thread
See More

Pro-King – Differential Cross Shaft (Part No.742G673)

Differential Cross Shaft

from

$28.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Smooth (Part No.16152)

Replacement Clutch Set For Dana 44 Powr Lok, Smooth

from

$177.99
Product Features:
  • Clutch kit
  • Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
  • Smooth design
See More

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Positraction Internals For GM 12 Bolt Car And Truck With 33 Spline Axles (Part No.16040)

Positraction Internals For GM 12 Bolt Car And Truck With 33 Spline Axles

from

$305.99
Yukon positraction internals for GM 12P and 12T with 33 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 12 bolt passenger car with 33 spline Dura Grip positraction
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

Differential Mini Spool

from

$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24

from

$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

Product Features:
  • Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
  • 3/8″ x 24 thread
See More

USA Standard Gear – Spartan Locker for Dana 44 Differential with 30 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17001)

Spartan Locker for Dana 44 Differential with 30 Spline Axles, Includes Heavy-duty Cross Pin Shaft

from

$669.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

USA Standard Gear – Dana 44 Master Overhaul Kit Replacement (Part No.37015)

Dana 44 Master Overhaul Kit Replacement

from

$259.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 44 rear
  • Uses Koyo bearings and races
  • 30 spline
  • Rear axle kit
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

from

$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:
  • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
See More

National – Shaft Repair Sleeve (Part No.99170)

Shaft Repair Sleeve

from

$38.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

8.6" GM 12P 12T & F8.8 Carrier Installation Kit

from

$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 12 bolt passenger car and truck and 8.6″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – Dana 44 Cover Gasket Replacement (Part No.23006)

Dana 44 Cover Gasket Replacement

from

$12.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 44
See More

Motive Gear – Differential Gear Install Kit (Part No.GM12IK)

Differential Gear Install Kit

from

$69.99


Product Features:
  • MINI INSTALL KIT GM 12BLT 8.875 TRUCK
See More

Motive Gear – Differential Ring and Pinion (Part No.GM12-411)

Differential Ring and Pinion

from

$205.99


Product Features:
  • GM 12BL 8.875 R/P 4.11 MG
See More

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

from

$5.99
Product Features:
  • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
  • 0.030″ thick
See More

Yukon Gear – Replacement Floater Roll Pin For Dana 44 & 8.75" Chrysler Power Lok (Part No.33326)

Replacement Floater Roll Pin For Dana 44 & 8.75" Chrysler Power Lok

from

$5.99
Product Features:
  • Floater roll pin
  • Fits Dana Spicer 44 and Chrysler 8.75″
  • Powr Lok positraction only
See More

Yukon Gear – Standard Open Pinion Gear Thrust Washer For GM 12P And 12T (Part No.33381)

Standard Open Pinion Gear Thrust Washer For GM 12P And 12T

from

$11.99
Standard Open pinion gear thrust washer for GM 12P and 12T.

Product Features:
  • Pinion gear thust washer for GM 12 bolt passenger car and truck
  • Fits standard open differentials only
See More

Dorman – Premium Ring And Pinion Master Bearing And Installation Kit (Part No.797-105)

Premium Ring And Pinion Master Bearing And Installation Kit

from

$249.99
If you’re repairing or rebuilding a front or rear differential and want the best performance and longevity from the bearings being replaced, choose this premium differential kit. It includes high-precision bearings manufactured to tighter tolerances and engineered to last longer than common lower-grade bearings that have more backlash when subjected to the torque generated within the differential. This convenient kit also saves the time needed to source individual components. Check the product attributes and fitment details to select the correct premium differential kit for your application.

Product Features:
  • Ideal solution – this premium differential bearing kit features high-precision bearings to help ensure longer bearing life, prevent backlash, and restore proper differential operation
  • Direct replacement – the components in this all-in-one kit are engineered to precisely match the fit and function of the original equipment bearings for a seamless installation
  • Increased reliability – the premium bearings in this kit are manufactured to exacting tolerances and specifications from high quality materials to help ensure optimal performance
  • Application-specific – check the product attributes and fitment details to choose the correct kit for your application
See More

Yukon Gear – Pinion Install Kit For GM 12 Bolt Truck Differential (Part No.13057)

Pinion Install Kit For GM 12 Bolt Truck Differential

from

$232.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 12 bolt truck
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Powertrax – Grip LOK Traction System (Part No.LK444430)

Grip LOK Traction System

from

$658.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Replacement Trail Repair Kit For Dana 30 And 44 With 1310 Size U/Joint And Straps (Part No.32278)

Replacement Trail Repair Kit For Dana 30 And 44 With 1310 Size U/Joint And Straps

from

$223.99
Yukon replacement trail repair kit for Dana 30 and 44 with 1310 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:
  • Fits Dana Spicer 30 and 44
  • 1310 u-joint size
  • Kit includes yoke, U-joint, pinion seal, pinion nut and washer, straps, bolts and threadlocker
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Powertrax – No-Slip Traction System (Part No.9207822805)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.34020)

    Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up

    from

    $1302.99
    The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

    Product Features:
    • Fits Dana Spicer 44 with 30 spline axles
    • 3.92 and up ratio only
    • Forged case and 8620 internals for added strength
    • Works with a variety of air delivery systems
    • Assembled in the USA
    See More

    Powertrax – Grip LS Traction System (Part No.LS231230)

    Grip LS Traction System

    from

    $480.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    1974 GMC G15/G1500 Van Differentials

    Maybe you’re in the middle of a full rebuild of that 1974 GMC G15/G1500 Van. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 182 different Differentials in our inventory ranging from $1.99 to $1,969.99. That means you can find the exact parts or products you need to keep that 1974 GMC G15/G1500 Van running smoothly.

    Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1974 GMC G15/G1500 Van. Valvoline, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1974 GMC G15/G1500 Van, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 392 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 5.0 stars and Differential Master Bearing Kit – Koyo with 3.8 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1974 GMC G15/G1500 Van rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1974 GMC G15/G1500 Van Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 GMC G15/G1500 Van demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G15/G1500 Van the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Driveworks Differentials

    We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1974 GMC G15/G1500 Van, our most popular Driveworks Differentials include:
    Oil Seal
    from $6.29
    (1)
    Oil Seal
    Differential Pinion Seals

    FAQs for 1974 GMC G15/G1500 Van Differentials

    What are the most purchased Differentials for the 1974 GMC G15/G1500 Van?

    Out of 182 Differentials for the 1974 GMC G15/G1500 Van, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    DIFFERENTIAL GASKET
    from $7.99
    (3)
    DIFFERENTIAL GASKET
    Rear Housing Cover Gaskets
    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt
    from $9.99
    This product is not rated
    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt
    Differential Cover Bolts

    What are the top-rated 1974 GMC G15/G1500 Van Differentials?

    Top-rated Differentials for your 1974 GMC G15/G1500 Van based on customer reviews/ratings are:
    Differential Ring And Pinion
    from $350.99
    (7)
    Differential Ring And Pinion
    “Great spark plugs.”
    Differential Master Bearing Kit - Koyo
    from $156.99
    (5)
    Differential Master Bearing Kit – Koyo
    “was delivered as promised and on time”
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    “worked great”