1974 Dodge Charger Exhaust Parts

Essential Exhaust Parts for 1974 Dodge Chargers

MagnaFlow – Performance Exhaust Manifold Down Pipe (Part No.19304)

Performance Exhaust Manifold Down Pipe

from

$245.99
Upgraded front pipes for optimized performance.

Product Features:
  • Unrestricted flow
  • CNC precision robotic manufacturing techniques
  • Durable corrosion-resistant stainless steel construction
See More

Dynomax – Exhaust Tail Pipe (Part No.55592)

Exhaust Tail Pipe

from

$96.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.853048)

Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound

from

$154.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:
  • Durable fully welded 409 stainless steel
  • Deep aggressive exhaust note
  • Noticeable interior resonance
  • Excellent performance on high horsepower vehicles
  • No internal packing to blowout
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842448)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Dorman – Help – Exhaust Manifold Stud (Part No.03211CD)

Exhaust Manifold Stud

from

$40.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03309CD)

Exhaust Manifold Hardware Kit

from

$46.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-473)

Direct Fit Exhaust Manifold: With Heat Shield

from

$203.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

Hooker Headers – Competition Header (Part No.5903HKR)

Competition Header

from

$418.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31311)

Exhaust Pipe Flange Gasket

from

$3.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

aFe POWER – Exhaust Tip Carbon (Part No.49C32068-C)

Exhaust Tip Carbon

from

$441.99
Dual Wall Construction:The MACH Force-Xp direct-fit clamp-on tips feature a carbon fiber outer wall and 304 stainless-steel inner wall for heat and corrosion resistance for long lasting good looks.Slotted Air Vents:Designed with slotted air vents to allow hot exhaust to dissipate, reducing surface heat and keeping the carbon fiber surface cooler.aFe POWER Logo:These tips feature an aFe POWER logo for an aggressive, custom look.

Product Features:
  • Double-Walled Slash Cut Design
  • Stainless Steel Construction
  • Direct Bolt-On
  • Carbon Fiber Outer Layer
See More

Walker – Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.41206)

Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD)

from

$23.79
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60025)

Exhaust Pipe Flange Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.9045)

Exhaust Pipe Flange Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61266)

Exhaust Pipe Flange Gasket

from

$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Elring – Exhaust Manifold Gas (Part No.A8111495015ELR)

Exhaust Manifold Gas

from

$33.87
Exhaust Manifold Gas

Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 91483)

EXHAUST MANIFOLD GASKET SET

from

$16.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 90049)

Exhaust Manifold Gasket Set

from

$18.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Walker – Hanger Length 7.75 (Part No.35261)

Hanger Length 7.75

from

$12.99
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • OE DESIGN — Designed with OE-style features for easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS — Made from quality steel for durability and long life
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35344)

Exhaust Clamp

from

$2.79
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35336)

Exhaust Clamp

from

$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (Part No.35793)

Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75

from

$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Clamp (Part No.250-058)

Exhaust Clamp

from

$6.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

JBA Performance – 40-1602 2.5" Stainless Steel Exhaust System 2011-14 Dodge Charger & 300C 5.7L (Part No.40-1602)

40-1602 2.5" Stainless Steel Exhaust System 2011-14 Dodge Charger & 300C 5.7L

from

$692.99
When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:
  • JBA Performance Exhaust 40-1602 2.5″ Stainless Steel Exhaust System 2011-14 Dodge Charger & 300C 5.7L
  • Large diameter stainless steel mandrel-bent tube
See More

Borla Performance Exhaust – Cat-Back Exhaust System – ATAK (Part No.140686)

Cat-Back Exhaust System - ATAK

from

$1718.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:
  • Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
  • Each system is built from premium, high-quality austenitic T-304 stainless steel
  • Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15492)

Street Series Cat-Back Performance Exhaust System

from

$1671.99
The MagnaFlow 2011-2014 Dodge Charger Street Series Cat-Back Performance Exhaust System 15492 brings out the personality of your 3.6L 2011-2014 Dodge Charger with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit, this Dodge Charger exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Charger’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15492 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15492 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Borla Performance Exhaust – T-304 Ss, 2.5"Pipe Dia, Dual Exhaust With Dual Exit, Split 5"Dia X 12" L Round (Part No.140125)

T-304 Ss, 2.5"Pipe Dia, Dual Exhaust With Dual Exit, Split 5"Dia X 12" L Round

from

$1408.99
BORLA(R) knowledge of the 5.7L Hemi engine allowed us to custom tune an exhaust system which is almost 30 Pounds lighter than the stock system, mainly due to the aircraft-grade high quality austenitic lightweight stainless steel used in every BORLA(R)system. Additional attributes include superior performance and that famous BORLA(R) growl of power.

Product Features:
  • BORLA(R) Cat-Back(TM) Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
  • Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel
  • Ultra Smooth Mandrel Bends Ensure Maximum Flow And Power
  • Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit
  • BORLA(R) Cat-Back(TM) Systems Are True Dual Mandrel Bent, High Performance Units Designed For Ease Of Installation And Solid Performance Gains
  • Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds
See More

MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.19303)

Street Series Crossmember-Back Performance Exhaust System

from

$1038.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 19303 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.625in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19303 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Upgrade your 1974 Dodge Charger with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 1974 Dodge Charger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Exhaust Parts are key to keeping your Charger functioning at its best. At Advance Auto Parts, we offer a wide selection of 37 Exhaust Parts for the 1974 Dodge Charger, designed to meet your needs without breaking the bank. From Exhaust Pipe replacements to Exhaust Mufflers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1974 Dodge Charger at great prices. Our Exhaust Parts inventory for this model ranges from just $2.29 to $1,038.99, with an average price of $188.37. Our 37 Exhaust Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1974 Dodge Charger without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1974 Dodge Charger, we stock popular OEM and aftermarket Exhaust Parts from top names like FELPRO, Walker, Flowmaster Inc., and more. FELPRO Exhaust Parts start at just $2.29 and boast an impressive 5 stars average rating from customers. Walker and Flowmaster Inc. also bring quality to the table, with Exhaust Parts available starting at $2.49, and at an average 4 stars rating. With 585 customer reviews and counting, our 1974 Dodge Charger Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1974 Dodge Charger is always ready to roll. We’re committed to providing you with everything you need to keep your Charger in top shape, all in one place. Start shopping confidently below for your 1974 Dodge Charger!

Best-Selling Exhaust Pipes for 1974 Dodge Chargers

Enhance the driving experience in your Dodge with 6 quality Exhaust Pipe components, starting at $2.29.

Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15806)

Prebent Tailpipes - 2.50 in. Rear Exit - Pair

from

$226.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More

Walker – 2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials (Part No.31307)

2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials

from

$5.49
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.9547)

Exhaust Pipe Flange Gasket

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60025)

Exhaust Pipe Flange Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

MagnaFlow – Performance Exhaust Manifold Down Pipe (Part No.19343)

Performance Exhaust Manifold Down Pipe

from

$294.99
Upgraded front pipes for optimized performance.

Product Features:
  • Unrestricted flow
  • CNC precision robotic manufacturing techniques
  • Durable corrosion-resistant stainless steel construction
See More

MagnaFlow – Performance Exhaust Manifold Down Pipe (Part No.19304)

Performance Exhaust Manifold Down Pipe

from

$245.99
Upgraded front pipes for optimized performance.

Product Features:
  • Unrestricted flow
  • CNC precision robotic manufacturing techniques
  • Durable corrosion-resistant stainless steel construction
See More

Most Popular 1974 Dodge Charger Exhaust Mufflers

Customize your Dodge with 6 Exhaust Mufflers products like Mufflers, all priced under $133.99.

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18230)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$95.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Walker – Sound Solution Muffler (Part No.18692)

Sound Solution Muffler

from

$64.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)

40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Walker – SoundFX Universal Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID) (Part No.18113)

SoundFX Universal  Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID)

from

$90.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Flowmaster Inc. – Super 40 Muffler – 2.25 Offset In / 2.25 Center Out – Aggressive Sound (Part No.952446)

Super 40 Muffler - 2.25 Offset In / 2.25 Center Out - Aggressive Sound

from

$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Top Picks for 1974 Dodge Charger Exhaust Manifold and Headers

Upgrade Dodge Chargers with top-quality Exhaust Manifold and Headers parts, including 7 OEM and aftermarket selections for your 1974 model.

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-232)

Direct Fit Exhaust Manifold: Without Heat Shield

from

$468.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

Flowtech – Ceramic Header (Part No.33130FLT)

Ceramic Header

from

$615.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Ceramic Headers
  • Rust And Corrosion Resistance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Mr. Gasket – Exhsthdrbolt (Part No.2230G)

Exhsthdrbolt

from

$47.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.

Product Features:
  • 12 per Package
  • Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
  • 410 stainless steel
  • Minimum 180,000 PSI tensile strength
  • 24 equally spaced clockwise teeth
See More

Flowtech – Standard Header (Part No.13130FLT)

Standard Header

from

$324.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Hooker Headers – Competition Header (Part No.5903-3HKR)

Competition Header

from

$904.99
Competition Header

Hooker Headers – LS1 Engine Swap Headers for 66-72 Chevelle, El Camino (Part No.5903-1HKR)

LS1 Engine Swap Headers for 66-72 Chevelle, El Camino

from

$753.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – Competition Header (Part No.5903HKR)

Competition Header

from

$418.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

In-Demand Exhaust Hangers for 1974 Dodge Chargers

Select from 1 premium Exhaust Hangers parts for your 1974 Dodge Charger.

Walker – Hanger Length 7.75 (Part No.35261)

Hanger Length 7.75

from

$12.99
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • OE DESIGN — Designed with OE-style features for easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS — Made from quality steel for durability and long life
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Most Sold 1974 Dodge Charger Exhaust Fittings

Explore our best-selling Dodge parts for the 1974 Charger among 2 OEM and aftermarket options starting from $2.49.

Walker – Exhaust Clamp (Part No.35344)

Exhaust Clamp

from

$2.79
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35336)

Exhaust Clamp

from

$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Top-Rated Exhaust Parts Brands For Your 1974 Dodge Charger

Shop for the best-rated brands offering Exhaust Parts and other products for your 1974 Dodge Chargers. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Walker, and Flowmaster Inc., and more. Exhaust Parts from these brands that fit a 1974 Charger start at just $2.29 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1974 Dodge Charger Exhaust Parts

When it comes to maintaining or upgrading your 1974 Dodge Charger, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 1974 Dodge Charger. With over 5 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.29, with an average price of just $13.67. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Exhaust Pipe Flange Gasket
from
$2.29
This product is not rated

Exhaust Pipe Flange Gasket

“”

Exhaust Pipe Flange Gasket
from
$3.29
This product is not rated

Exhaust Pipe Flange Gasket

“”

Exhaust Manifold Gasket Set
from
$16.29
This product is not rated

Exhaust Manifold Gasket Set

“”

Popular Walker 1974 Dodge Charger Exhaust Parts

Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 1974 Dodge Charger owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 1974 Charger, Advance Auto Parts carries a full inventory of 8 Walker Exhaust Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Walker Exhaust Parts range from $2.49 to $95.99, plus, with more than 33 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

Exhaust Clamp
from
$2.79
This product is not rated

Exhaust Clamp

“”

SoundFX Universal  Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID)
from
$90.99
This product is not rated

SoundFX Universal Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID)

“”

Hanger Length 7.75
from
$12.99
This product is not rated

Hanger Length 7.75

“”

FAQs for 1974 Dodge Charger Exhaust Parts

Which Exhaust Parts are best-sellers for 1974 Dodge Chargers?

Out of 37 Exhaust Parts that fit 1974 Dodge Chargers, the following parts are the top sellers:

What’s the price range for 1974 Dodge Charger Exhaust Parts?

Exhaust Part prices for the 1974 Dodge Charger start at $2.29 and go up to $1,038.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 1974 Dodge Charger?

The average price for Exhaust Parts for the 1974 Dodge Charger is $188.37. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Dodge Charger model years?

Yes, we currently carry Exhaust Parts for 35 model years of Dodge Chargers between 1966 and 2023. Exhaust Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Exhaust Parts for my 1974 Dodge Charger?

The cheapest 1974 Dodge Charger Exhaust Parts we carry in stock are:

What are the top-rated Exhaust Parts that fit the 1974 Dodge Charger?

Out of 585 reviews by customers, our 1974 Dodge Charger Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1974 Dodge Charger and their top-rated products:

What types of Exhaust Parts do you sell for my 1974 Dodge Charger?

Can I get help with 1974 Dodge Charger Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Exhaust Parts and more.

What is your return policy for Dodge Charger Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Dodge Charger Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.