1974 Chevrolet K10 Suburban Differentials

Essential 1974 Chevrolet K10 Suburban Differentials

Yukon Gear – Pinion Install Kit For Dana 44 Differential (Part No.13020)

Pinion Install Kit For Dana 44 Differential

from

$264.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
See More

Pro-King – Differential Cross Shaft (Part No.742G673)

Differential Cross Shaft

from

$28.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P

from

$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:
  • Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
  • Left hand thread
See More

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Driveworks – Oil Seal (Part No.S-5778)

Oil Seal

from

$10.49
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More

from

$4.99
3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:
  • Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
See More

Yukon Gear – Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck (Part No.55008)

Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck

from

$21.99
Product Features:
  • Pinion depth shims for GM 7.5″, 7.625″, 7.6 IFS, 7.6 IRS, 7.75″, 8.2″, 1955-1964 passenger car and 12 bolt car and truck
See More

Yukon Gear – 12T 5 Lug Conversion Axle, 65-69 30 ╛" Early 30-Spline 5X5 Bolt Pattern (Part No.21629)

12T 5 Lug Conversion Axle, 65-69 30 ╛" Early 30-Spline 5X5 Bolt Pattern

from

$321.99
12T 5 Lug conversion axle, 65-69 30 ¾” early 30-spline 5X5 bolt pattern. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a five year warranty against manufacturing defects. This is a C-clip.

Product Features:
  • Fits 1965-1969 GM 12 bolt truck with 4 wheel drive
  • 30 spline
  • 30 3/4″ long
  • 5 lug
See More

Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)

O-Ring For Toyota & Dana 44 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 44 and Toyota 8″ and V6
See More

National – Shaft Repair Sleeve (Part No.99193)

Shaft Repair Sleeve

from

$43.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

8.6" GM 12P 12T & F8.8 Carrier Installation Kit

from

$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 12 bolt passenger car and truck and 8.6″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)

RngPnnInstlKt

from

$59.99
RngPnnInstlKt

National – Bearings (Part No.02872)

Bearings

from

$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Steel Cover For Dana 44 Standard Rotation (Part No.32319)

Steel Cover For Dana 44 Standard Rotation

from

$129.99
Product Features:
  • Fits standard rotation Dana Spicer 44
  • Steel
See More

Yukon Gear – GM 12 Bolt Truck Cover Gasket (Part No.23015)

GM 12 Bolt Truck Cover Gasket

from

$12.99
12T cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 12 bolt truck
See More

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Replacement Baffle For Dana 60 & Dana 70-U

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
See More

National – Bearings (Part No.15245)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 And 61 (Full-Floating) With 30 Spline Axles (Part No.16086)

Replacement Positraction Internals For Dana 60 And 61 (Full-Floating) With 30 Spline Axles

from

$892.99
Yukon replacement positraction internals for Dana 60 and 61 (full-floating) with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60 with Trac Loc positraction with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Powertrax – Grip LOK Traction System (Part No.LK444430)

Grip LOK Traction System

from

$658.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With 1410 U/Joint Size (Part No.41031)

Replacement Yoke For Dana 60 And 70 With 1410 U/Joint Size

from

$334.99
Yukon replacement yoke for Dana 60 and 70 with 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1410 u-joint size
  • 4.188″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement

from

$6.99
Product Features:
  • Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.34020)

Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up

from

$1302.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • 3.92 and up ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)

Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM

from

$83.99
Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.

Product Features:
  • Axle Redi-sleeve
  • Fits Dana Spicer 44
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.RA29R)

Differential Bearing Kit - Koyo

from

$139.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • DANA-60 BRG & SEAL KIT-UP TO 98 FRD
See More

Yukon Gear – Pinion Nut (Part No.33150)

Pinion Nut

from

$11.99
Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ socket, 7/8″ x 16 thread.

Product Features:
  • Pinion nut for GM 12 bolt car and truck, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
  • 7/8″ x 16 thread
  • 1 1/8″ socket
See More

Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)

Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75"

from

$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
  • 3/4″ x 16 thread
See More

Popular 1974 Chevrolet K10 Suburban Differentials Categories

1974 Chevrolet K10 Suburban Differentials

Maybe you’re in the middle of a full rebuild of that 1974 Chevrolet K10 Suburban. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 334 different Differentials in our inventory ranging from $0.91 to $1,969.99. That means you can find the exact parts or products you need to keep that 1974 Chevrolet K10 Suburban running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1974 Chevrolet K10 Suburban. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1974 Chevrolet K10 Suburban, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 648 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 5.0 stars and Multi Purpose Seal with 4.3 stars.

So if you’re in the market for aftermarket Differentials to keep your 1974 Chevrolet K10 Suburban rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1974 Chevrolet K10 Suburban Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 Chevrolet K10 Suburban demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K10 Suburban the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1974 Chevrolet K10 Suburban Differentials

What are the most purchased Differentials for the 1974 Chevrolet K10 Suburban?

Out of 334 Differentials for the 1974 Chevrolet K10 Suburban, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Axle Housing Cover Gasket
from $6.49
(10)
Axle Housing Cover Gasket
Rear Housing Cover Gaskets
Bearings
from $9.99
(8)
Bearings
Rear Differential Pinion Bearings

What are the top-rated 1974 Chevrolet K10 Suburban Differentials?

Top-rated Differentials for your 1974 Chevrolet K10 Suburban based on customer reviews/ratings are:
Differential Ring And Pinion
from $350.99
(7)
Differential Ring And Pinion
“Great spark plugs.”
Multi Purpose Seal
from $23.29
(4)
Multi Purpose Seal
“Works well fit right in. Love national seals”
DIFFERENTIAL GASKET
from $7.99
(3)
DIFFERENTIAL GASKET
“Perfect fit for my 1970 c10 with 12 bolt rear end”