1974 Chevrolet Caprice Flywheels
More 1974 Chevrolet Caprice Flywheels
Find your specific 1974 Chevrolet Caprice original or aftermarket Flywheels below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1974 Chevrolet Caprice Flywheels
ATP – Flywheel Ring Gear (Part No.ZA-512)
from
$33.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – FLYWHEEL SHIM (Part No.GS-3)
from
$29.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.GS-2)
from
$27.99
FLYWHEEL SHIM
ATP – ATP Flywheel Shim (Part No.GS-8)
from
$27.99
ATP Flywheel Shim
ATP – FLYWHEEL SHIM (Part No.GS-11)
from
$23.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.GS-9)
from
$23.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.GS-10)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.GS-4)
from
$26.99
FLYWHEEL SHIM
B & M – Flexplate, 153 Tooth 55-85 Shortblock Chevy (Part No.20237)
from
$143.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955 to 1985 small block Chevy V8 engines (internally balanced) with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, 10.75 inch bolt pattern, 153 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-165)
from
$66.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – Automatic Transmission Flex Plate (Part No.Z-149)
from
$54.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Lakewood – High Performance OEM Flexplate (Part No.RM-922)
from
$103.99
High Performance OEM Flexplate
Hays – Performance; Flywheel (Part No.10-630)
from
$471.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
ATP – Automatic Transmission Flex Plate (Part No.Z-151)
from
$50.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Lakewood – OEM Replacement Flexplate (Part No.RM-902)
from
$163.99
OEM Replacement Flexplate
ATP – Automatic Transmission Flex Plate (Part No.Z-269)
from
$77.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Hays – Performance; Flexplate (Part No.10-012)
from
$133.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:
See More
Product Features:
- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
ATP – M/T FLYWHEEL BOLT (Part No.ZX-2196)
from
$18.99
M/T FLYWHEEL BOLT
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$9.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Flexplate Mounting Bolts (Part No.14112)
from
$18.29
Servicing or installing a flywheel or flexplate on a General Motors LS engine with a manual or automatic transmission? Ensure a truly professional repair by replacing all the worn or broken factory bolts with this convenient package of six direct-replacement 11mm x 1.5 mounting bolts. Coated with clear zinc for corrosion resistance, with threadlocker already applied, they’re precision-manufactured from strong steel for long service life.
Product Features:
See More
Product Features:
- Direct replacement – these six 11mm x 1.5 flywheel bolts match the fit, function and performance of the factory fasteners
- Convenient package – package contains six bolts, the exact quantity needed for a complete repair
- Durable construction – coated with clear zinc for corrosion resistance, with threadlocker already applied, and made from strong steel for long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)
from
$12.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)
from
$3.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1974 Chevrolet Caprice Flywheels Categories
1974 Chevrolet Caprice Flywheels
Maybe you’re in the middle of a full rebuild of that 1974 Chevrolet Caprice. Maybe you just need a couple of Flywheels. Either way, Advance Auto Parts has 31 different Flywheels in our inventory ranging from $3.99 to $491.99. That means you can find the exact parts or products you need to keep that 1974 Chevrolet Caprice running smoothly.
Flywheels are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1974 Chevrolet Caprice. ATP, Dorman, and Hays are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Flywheels for your 1974 Chevrolet Caprice, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 312 reviews in this category, some of the top rated parts include Performance; Flexplate with 1.0 stars.
So if you’re in the market for aftermarket Flywheels to keep your 1974 Chevrolet Caprice rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Flywheels Brands To Make Your 1974 Chevrolet Caprice Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 Chevrolet Caprice demands trusted brand parts and products to keep it running. Many trusted brands of Flywheels make up Advance Auto Parts’ inventory, and all are ready to help make your Caprice the best it can be. Be sure to browse some of our top Flywheels brands and parts.
Popular Dorman – Help Flywheels
We carry Dorman – Help parts in our stock across Flywheel Bolts categories, plus more. For a 1974 Chevrolet Caprice, our most popular Dorman – Help Flywheels include:
from
$12.99
(2)
Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In
Flywheel Bolts
Top 1974 Chevrolet Caprice Flywheels from ATP
ATP products are another trusted brand when it comes to Flywheels for your 1974 Chevrolet Caprice. Popular ATP parts include:
FAQs for 1974 Chevrolet Caprice Flywheels
What are the most purchased Flywheels for the 1974 Chevrolet Caprice?
Out of 31 Flywheels for the 1974 Chevrolet Caprice, the most popular in our inventory are:
What are the top-rated 1974 Chevrolet Caprice Flywheels?
Top-rated Flywheels for your 1974 Chevrolet Caprice based on customer reviews/ratings are:
from
$122.99
(1)
Performance; Flexplate
“purchased this for my 1971 427 stroker Corvette,and one of the teeth chipped off the. engine was turned correctly so this should not have happened.”
