1973 Mercury Marquis Performance Engines

Essential 1973 Mercury Marquis Performance Engines

Edelbrock – Performer 302; Intake Manifold (Part No.37231)

Performer 302; Intake Manifold

from

$661.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Weiand – Action +Plus; Water Pump (Part No.8209P)

Action +Plus; Water Pump

from

$300.99
Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:
  • Fits Later Applications w/Water Inlet On LH Side
  • Street Performance
  • Heavy Duty Shaft w/5/8 in. Pilot
  • Six-Blade Stamped Steel
  • Anti-Cavitation Impeller
  • 100 Percent Leak Tested
  • Bearing Shaft And Seal
See More

Spectre – Water Neck; Ford 429-460 (Part No.4734)

Water Neck; Ford 429-460

from

$54.99
Spectre’s Ford V8 water neck fits Ford 429 – 460 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes sealing O-ring, and has a 3/8 inch NPT threaded hole for the Ford temp sensor.

Product Features:
  • Fits Ford 429 – 460 engines
  • Has a 3/8 inch NPT threaded hole for temperature sensor
  • Includes sealing O-ring
  • Chrome plated
  • Easy to install
  • Hardware not included
See More

Spectre – Water Neck; 351C (Part No.4735)

Water Neck; 351C

from

$28.99
Spectre’s Ford water neck fits Ford 351 Cleveland engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts and sealing O-ring.

Product Features:
  • Fits Ford 351 Cleveland
  • Includes sealing O-ring and bolts
  • Chrome plated
  • Easy to install
See More

Edelbrock – Pushrod Set for Ford 351W (Part No.9659)

Pushrod Set for Ford 351W

from

$190.99
Edelbrock part #9659 Pushrods are designed for small-block Ford 351W V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise f

Product Features:
  • 7.7 in. Length
  • 0.312 in. Diameter
  • 4130 Chromoly Steel Material
  • Black Oxide Finish
  • Made In The USA
See More

Edelbrock – Pushrod Set for Small Block Ford 289-302 (Part No.9632)

Pushrod Set for Small Block Ford 289-302

from

$210.99
Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More

Edelbrock – Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set (Part No.7335)

Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set

from

$185.99


Product Features:
  • Dial-In Your Camshaft With Ease
  • Made From Induction Hardened Billet Steel
  • Solid Bushing Chain Resists Stretching
  • Billet SAE-1144 Steel Crank Sprockets
  • Multiple Keyways
See More

Edelbrock – TIMING CHAIN (Part No.7844)

TIMING CHAIN

from

$29.99
Product Features:
  • Timing Chain Only
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1811)

PERFORMANCE OIL PAN GASKET SET

from

$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1028)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$91.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Cylinder Head Gasket Set for Ford (Part No.7337)

Cylinder Head Gasket Set for Ford

from

$61.99
Product Features:
  • Cylinder Head Gasket Set
  • 1958-1976 390-428
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2901)

Engine Crankshaft Seal Kit

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2948)

Engine Crankshaft Seal Kit

from

$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Valve Cover Gasket (Part No.275)

Valve Cover Gasket

from

$35.99
Valve Cover Gasket

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1632)

Engine Valve Cover Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$100.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

B & M – Torque Converter, Tork Master 2000 (Part No.40427)

Torque Converter, Tork Master 2000

from

$338.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

B & M – CONVERTER AOD HP (Part No.40437)

CONVERTER AOD HP

from

$297.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
  • Washer Between Turbine and Cover
See More

Mr. Gasket – Intake Gasket (Part No.222)

Intake Gasket

from

$35.99
Mr. Gasket standard intake gasket sets are manufactured from a blend of nitrile rubber and fiber, for excellent sealing and durability. They’re precision die-cut for each specific application to ensure a great fit, and can be custom-trimmed for modified ports where needed. The sets come complete with all necessary seals and block-off plates.

Product Features:
  • Designed to ensure excellent sealing
  • Provides long lasting durability
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1228)

Lower Intake Manifold Gasket Set: 5 Piece Set

from

$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
  • 1970-74; w/4 Bbl. Cylinder heads
  • Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
  • Not intended for use in emission controlled vehicles.
See More

Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam and Lifter Kit for Ford 351W (Part No.CL35-250-4)

Xtreme Energy 240/246 Hydraulic Flat Cam and Lifter Kit for Ford 351W

from

$373.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Edelbrock – Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8 (Part No.2167)

Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8

from

$368.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – Sure Seat Valve Springs for Ford 390-428 FE V8 1961-1976 (Part No.5806)

Sure Seat Valve Springs for Ford 390-428 FE V8 1961-1976

from

$72.99
Product Features:
  • Non-Rotator Type
  • 1.458 in. Outer Diameter
  • 1.062 in. Inner Diameter
  • 1.062 in. Coil Blind
  • Set of 16
See More

Edelbrock – Sure Seat; Valve Spring (Part No.5972)

Sure Seat; Valve Spring

from

$47.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Mr. Gasket – Ultra Seal; Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal; Harmonic Balancer Bolt/Washer Kit

from

$35.99
The grade 8 bolts feature high hex head to prevent socket slippage. The thick parallel ground washer allows accurate uniform torque. Black finished, complete with split lock washer to prevent loosening.

Product Features:
  • Grade 8 material
  • Heat-treated for strength
  • Hex prevents socket slippage
  • Accurate and uniform torque
  • Black plated finish
See More

1973 Mercury Marquis Performance Engines

Maybe you’re in the middle of a full rebuild of that 1973 Mercury Marquis. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 40 different Performance Engines in our inventory ranging from $19.99 to $772.99. That means you can find the exact parts or products you need to keep that 1973 Mercury Marquis running smoothly.

Performance Engines are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1973 Mercury Marquis. FEL-PRO Performance, Mr. Gasket, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1973 Mercury Marquis, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 40 reviews in this category, some of the top rated parts include Water Neck; 351C with 1.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1973 Mercury Marquis rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1973 Mercury Marquis Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1973 Mercury Marquis demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Marquis the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular FEL-PRO Performance Performance Engines

We carry FEL-PRO Performance parts in our stock across Performance Engine Intake Manifold Gaskets and Performance Engine Valve Cover Gasket Sets categories, plus more. For a 1973 Mercury Marquis, our most popular FEL-PRO Performance Performance Engines include:
Lower Intake Manifold Gasket Set: 11 Piece Set
from $33.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets
Engine Valve Cover Gasket Set
from $46.99
(1)
Engine Valve Cover Gasket Set
Performance Engine Valve Cover Gasket Sets
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $51.99
(2)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets

FAQs for 1973 Mercury Marquis Performance Engines

What are the most purchased Performance Engines for the 1973 Mercury Marquis?

Out of 40 Performance Engines for the 1973 Mercury Marquis, the most popular in our inventory are:
Intake Manifold Bolts
from $19.99
(1)
Intake Manifold Bolts
Performance Intake Manifolds
Ultra Seal; Harmonic Balancer Bolt/Washer Kit
from $35.99
This product is not rated
Ultra Seal; Harmonic Balancer Bolt/Washer Kit
Performance Engine Harmonic Balancers
Lower Intake Manifold Gasket Set: 5 Piece Set
from $38.99
This product is not rated
Lower Intake Manifold Gasket Set: 5 Piece Set
Performance Engine Intake Manifold Gaskets

What are the top-rated 1973 Mercury Marquis Performance Engines?

Top-rated Performance Engines for your 1973 Mercury Marquis based on customer reviews/ratings are:
Water Neck; 351C
from $28.99
(1)
Water Neck; 351C
“I bought this neck for my Cleveland swap. I installed it and forgot it. I swaped the engine and got everything in order to fire it up. Added coolan”