1973 GMC K15/K1500 Pickup Drivetrains

Essential 1973 GMC K15/K1500 Pickup Drivetrains

National – Bearings (Part No.25523)

Bearings

from

$19.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More

Yukon Gear – 1541H Alloy 6 Lug Rear Axle For ’70-’81 GM 12T 4WD (Part No.21256)

1541H Alloy 6 Lug Rear Axle For '70-'81 GM 12T 4WD

from

$284.99
Yukon 1541H alloy 6 lug rear axle for ’70-’81 GM 12T 4WD with a length of 31-7/16 inches and 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip.

Product Features:
  • Fits 1970-1981 GM 12 bolt truck with 4 wheel drive
  • 30 spline
  • 31 7/16″ long
  • 6 lug
See More

Yukon Gear – Dana 44 Cover Gasket Replacement (Part No.23006)

Dana 44 Cover Gasket Replacement

from

$12.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 44
See More

Yukon Gear – Spindle Bearing For Dana 44 (Part No.33493)

Spindle Bearing For Dana 44

from

$23.99
Spindle bearing for Dana 44. This replaces Spicer part number 550759.

Product Features:
  • Spindle bearing
  • Fits Dana Spicer 44
See More

Yukon Gear – Minor Install Kit For Dana 60 And 61 Differential (Part No.12026)

Minor Install Kit For Dana 60 And 61 Differential

from

$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Axle Shaft Lock Assortment

from

$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Milemarker – MileMarker Street Master; Manual Hub (Part No.302)

MileMarker Street Master; Manual Hub

from

$196.99
Black nylon reinforced fiberglass dial. Limited lifetime warranty. 19 spline, internal bolts. Chrome.

Product Features:
  • Black Nylon Reinforced Fiberglass Dial
  • Limited Lifetime Warranty
See More

Felpro – Transfer Case Gasket Set (Part No.TS 80130)

Transfer Case Gasket Set

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Yukon Gear – Pinion Install Kit For Dana 44 Differential (Part No.13020)

Pinion Install Kit For Dana 44 Differential

from

$264.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)

Tapered Roller Bearing

from

$13.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Dana 44 Front Axle Bearing And Seal Kit Replacement (Part No.10022)

Dana 44 Front Axle Bearing And Seal Kit Replacement

from

$121.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Replacement Axle bearing and seal kit for ’57 to ’77 Dana 44 and Chevy/GM 1/2 ton front axle. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:
  • Fits 1957-1977 GM 1/2 ton
  • Includes axle bearings, races and seal
  • Services one side
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2012
  • Weight approx: 1 Lbs
  • CUSHION INSERT ONLY
  • FOR COMPLETE MOUNT SEE PART 6056
See More

National – Multi Purpose Seal (Part No.7412S)

Multi Purpose Seal

from

$14.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Pro-King – Pinion Nut (Part No.740A961)

Pinion Nut

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Spectre – GM Diff Cover 12 Bolt (Part No.6076)

GM Diff Cover 12 Bolt

from

$64.99
Spectre’s 12 bolt Differential Covers feature a triple chrome plated steel construction. Designed to perform as well as they look, these covers fit a variety of vehicles. Use the Spectre application search for vehicle specific lookup. Includes 12 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:
  • Triple chrome plated steel
  • Gasket included
  • 12 bolt design
  • 12 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
See More

Yukon Gear – Positraction Internals For GM 12 Bolt Car And Truck With 30 Spline Axles (Part No.16039)

Positraction Internals For GM 12 Bolt Car And Truck With 30 Spline Axles

from

$425.99
Yukon positraction internals (0.806″ diameter) for GM 12P and 12T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit GM 12 bolt passenger car and truck Dura Grip positraction with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Pro-King – Differential Internal Nest Kit (Part No.742J717)

Differential Internal Nest Kit

from

$219.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.73 & Down (Part No.26026)

Dura Grip For Dana 44, 30 Spline, 3.73 & Down

from

$869.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • 3.73 ratio and down only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 13391)

DIFFERENTIAL GASKET

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Axle Repair Bearing (Part No.S-RP-6408)

Axle Repair Bearing

from

$24.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Richmond Gear – Differential Ring And Pinion (Part No.69-0298-1)

Differential Ring And Pinion

from

$360.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)

Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles

from

$15.99
Product Features:
  • Carrier shim kit for Dana Spicer 30 with 30 spline axles
See More

Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)

Axle Seal, For 1559 Or 6408 Bearing

from

$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • 2.530″ O.D.
See More

Motive Gear – Differential Super Bearing Kit – Koyo (Part No.R12RSK)

Differential Super Bearing Kit - Koyo

from

$137.99


Product Features:
  • SUPER KIT – GM 12 BOLT(TRUCK)
See More

Popular 1973 GMC K15/K1500 Pickup Drivetrains Categories

1973 GMC K15/K1500 Pickup Drivetrains

You count on your 1973 GMC K15/K1500 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 471 Drivetrains ranging in price from $0.91 to $1,674.99, you’re sure to find everything you need for your 1973 GMC K15/K1500 Pickup.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 20 different brands like Valvoline, Moog, and National. 1973 GMC K15/K1500 Pickup Drivetrains start as low as $0.91!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 10,375 extensive product reviews on 1973 GMC K15/K1500 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1973 GMC K15/K1500 Pickup below to get started!

Top-Rated Drivetrains Brands For Your 1973 GMC K15/K1500 Pickup

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1973 GMC K15/K1500 Pickup running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.

Popular Valvoline Drivetrains

You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1973 GMC K15/K1500 Pickup back on the road. Some of the top-rated Valvoline products in these categories are:

FAQs for 1973 GMC K15/K1500 Pickup Drivetrains

What are the most purchased Drivetrains for the 1973 GMC K15/K1500 Pickup?

Out of 471 Drivetrains for the 1973 GMC K15/K1500 Pickup, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints

What are the top-rated 1973 GMC K15/K1500 Pickup Drivetrains?

Top-rated Drivetrains for your 1973 GMC K15/K1500 Pickup based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $47.99
(39)
Greaseable Super Strength Universal Joint
“Great”
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Non-Greaseable Super Strength Universal Joint
from $32.99
(28)
Non-Greaseable Super Strength Universal Joint
“installed as needed”