1973 Dodge D100 Pickup Drivetrains
More 1973 Dodge D100 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1973 Dodge D100 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1973 Dodge D100 Pickup Drivetrains
Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)
from
$49.99
7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
- 7260 u-joint size
- Includes two straps and four bolts
National – Bearings (Part No.15245)
from
$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.482163N)
from
$5.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – 1541H Alloy 5 Lug Rear Axle For ’79 And Older Chrysler 9.25" 2WD (Part No.21016)
from
$316.99
Yukon 1541H alloy 5 lug rear axle for ’79 and older Chrysler 9.25″ 2WD with a length of 31-11/16″ and 31 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.
Product Features:
See More
Product Features:
- 31 spline
- 5 lug
- 31 11/16″ long
- Fits Chrysler 9.25″ in 1979 and down Dodge 2WD truck
Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)
from
$9.99
Chrysler 8.75″ (coarse spline) pinion nut washer.
Product Features:
See More
Product Features:
- Pinion nut washer
- Fits Chrysler 8.75″ with 10 spline pinion
Yukon Gear – Standard Open Notched Cross Pin Shaft For 9.25" Chrysler (Part No.33309)
from
$84.99
Standard Open notched cross pin shaft for 9.25″ Chrysler.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Chrysler 9.25″
- Standard open carrier only
- Notched
Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)
from
$14.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)
from
$21.99
8.75″ Chrysler & 9″ Ford preload shim kit.
Product Features:
See More
Product Features:
- Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
Motive Gear – Ring Gear Bolt (Part No.14066913)
Dorman – Differential Pinion Yoke Assembly (Part No.697-541)
from
$231.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
- Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Dana 44 And Chrysler 9.25" Traclloc Clutch Kit Replacement (Part No.16153)
from
$139.99
Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Dana Spicer 44 and Chrysler 9.25″ Trac Loc positraction
Yukon Gear – Dura Grip For Chrysler 9.25" Rear (Part No.26019)
from
$829.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Positraction Clutch Guide (Part No.33352)
from
$8.99
Positraction clutch guide.
Product Features:
See More
Product Features:
- Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
- Compatible with Dura Grip positractions only
Richmond Gear – RngPnn (Part No.69-0047-1)
from
$342.99
RngPnn
Warn – Hub Service (Part No.11967)
from
$62.99
Ideal for OEM hub replacement. 4140 steel clutch ring. Inner drive gear. Precision cast hub body.
Product Features:
See More
Product Features:
- Standard Manual Hub Service Kit
Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)
from
$10.99
7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.
Product Features:
See More
Product Features:
- U-Joint strap bolt
- Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
- 7290 u-joint size
Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)
Pro-King – Differential Case (Empty) (Part No.723A714)
from
$243.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Multi Purpose Seal (Part No.8516N)
from
$17.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Motive Gear – Differential Carrier (Part No.C9.25E)
Driveworks – Oil Seal (Part No.S-482163N)
Yukon Gear – Standard Open Spider Gear Kit For ’96 And Older 8.25" Chrysler With 27 Spline Axles (Part No.16002)
from
$301.99
Yukon standard open spider gear kit for ’96 and older 8.25″ Chrysler with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Chrysler 8.25″ open differntial with 27 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)
from
$64.99
Differential side bearing screw adjuster for 9.25″ Chrysler.
Product Features:
See More
Product Features:
- Side adjuster for Chrysler 9.25″ rear
USA Standard Gear – Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17037)
from
$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Chrysler 8.25″ with 27 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)
from
$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.
Product Features:
See More
Product Features:
- c-clip for Chrysler 9.25″ rear
- 0.205″ thick
Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)
Popular 1973 Dodge D100 Pickup Drivetrains Categories
1973 Dodge D100 Pickup Drivetrains
You count on your 1973 Dodge D100 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 295 Drivetrains ranging in price from $2.49 to $919.99, you’re sure to find everything you need for your 1973 Dodge D100 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like National, Yukon Gear, and Anchor. 1973 Dodge D100 Pickup Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,903 extensive product reviews on 1973 Dodge D100 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 4.5 stars and Universal Joint with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1973 Dodge D100 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1973 Dodge D100 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1973 Dodge D100 Pickup running right for years to come. In our inventory you’ll find brands like National, Yukon Gear, Anchor, and even more.
Popular Yukon Gear Drivetrains
You’ll find popular Yukon Gear brand products across Differentials. All are waiting to get your 1973 Dodge D100 Pickup back on the road. Some of the top-rated Yukon Gear products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1973 Dodge D100 Pickup, and some of our most reviewed National parts include:
FAQs for 1973 Dodge D100 Pickup Drivetrains
What are the most purchased Drivetrains for the 1973 Dodge D100 Pickup?
Out of 295 Drivetrains for the 1973 Dodge D100 Pickup, the most popular in our inventory are:
What are the top-rated 1973 Dodge D100 Pickup Drivetrains?
Top-rated Drivetrains for your 1973 Dodge D100 Pickup based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
