1973 Dodge Coronet Alternators and Starters

Essential 1973 Dodge Coronet Alternators and Starters

Carquest Premium – Starter Relay (Part No.SBC3436)

Starter Relay

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Starter Relay (Part No.SAC1174)

Starter Relay

from

$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Alternator: Remanufactured, 60 Amps (Part No.7509A)

Alternator: Remanufactured, 60 Amps

from

$82.99
Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator: Remanufactured, 60 Amps (Part No.7024A)

Alternator: Remanufactured, 60 Amps

from

$82.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More

Carquest Premium – Voltage Regulator (Part No.RAA1052)

Voltage Regulator

from

$55.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications. By fully understanding how the alternator and the voltage regulator interact ensures that the CARQUEST volt

Product Features:
  • CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
  • CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
  • CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
  • CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
See More

Carquest – Voltage Regulator (Part No.R296)

Voltage Regulator

from

$29.05
Product Features:
  • Our Throttle Position Sensors maintain specific installed outputs to match OE rather than adjustable consolidated designs
  • Circuits are printed on flexible polyimide film or ceramic-based substrates for excellent dimensional stability preventing electrical performance drift. Noble palladium/gold/platinum alloys provide low contact resistance for extended service life
  • Each TPS uses integral rotor bearings and return springs for easy installation
  • Each sensor undergoes rigorous end-of-line testing with thousands of data points to validate output voltages for optimum performance and trouble-free operation
See More

Carquest Premium – Alternator Connector (Part No.PTA1661)

Alternator Connector

from

$2.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Alternator Diode (Part No.SCA1024)

Alternator Diode

from

$11.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Voltage Regulator Connector (Part No.PTA1062)

Voltage Regulator Connector

from

$16.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Alternator Brush Set (Part No.XAA1015)

Alternator Brush Set

from

$4.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.989-003)

Ignition Lock Cylinder: Two Keys Included

from

$28.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:
  • Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
  • Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Ignition Lock Cylinder CSC2306 (Part No.CSC2306)

Ignition Lock Cylinder CSC2306

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder CSC2095 (Part No.CSC2095)

Ignition Lock Cylinder CSC2095

from

$15.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.989-016)

Ignition Lock Cylinder: Two Keys Included

from

$29.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:
  • Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
  • Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Starter Remanufactured (Part No.3250S)

Starter  Remanufactured

from

$76.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Lifetime Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Each unit is triple-tested to ensure quality and performance
  • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
  • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
See More

Carquest HD Electrical – Starter: New, 12V, 10 Tooth (Part No.72-17466N)

Starter: New, 12V, 10 Tooth

from

$230.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are prime

Product Features:
  • High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
  • Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
  • Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
  • Integrated magnetic switch provides protection against weak power from batteries.
  • Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
  • Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
See More

Carquest Standard – Starter Remanufactured Standard (Part No.3250SV)

Starter Remanufactured Standard

from

$62.99
Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Professional – Starter-New (Part No.17466SN)

Starter-New

from

$167.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-10227
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

National – Bearings (Part No.204)

Bearings

from

$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.203)

Bearings

from

$19.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Needle Bearing (Part No.S-MNJ-471-S)

Needle Bearing

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.303-SS)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.MNJ-471-S)

Bearings

from

$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Ball Bearing (Part No.SL-203-FF)

Ball Bearing

from

$13.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

1973 Dodge Coronet Alternators and Starters

You count on your 1973 Dodge Coronet to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Alternators and Starters. With 26 Alternators and Starters ranging in price from $2.99 to $406.99, you’re sure to find everything you need for your 1973 Dodge Coronet.

Brands matter. If you want to shop a specific Alternators and Starters brand, we stock 8 different brands like Carquest Premium, Carquest, and Carquest Professional. 1973 Dodge Coronet Alternators and Starters start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Alternators and Starters is by asking professionals. Short of that, you can shop with confidence thanks to our 2,024 extensive product reviews on 1973 Dodge Coronet Alternators and Starters. Some of the top-rated Alternators and Starters products we carry are Alternator: Remanufactured, 60 Amps with 3.3 stars and Starter Remanufactured Standard with 3.1 stars.

Did we mention you can order your Alternators and Starters from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Alternators and Starters inventory for your 1973 Dodge Coronet below to get started!

Top-Rated Alternators and Starters Brands For Your 1973 Dodge Coronet

Trusted Alternators and Starters OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1973 Dodge Coronet running right for years to come. In our inventory you’ll find brands like Carquest Premium, Carquest, Carquest Professional, and even more.

Popular Carquest Professional Alternators and Starters

You’ll find popular Carquest Professional brand products across Starter Parts. All are waiting to get your 1973 Dodge Coronet back on the road. Some of the top-rated Carquest Professional products in these categories are:
Starter-New
from $167.99
(8)
Starter-New
Starters

Top-Rated Carquest Premium Alternators and Starters


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Alternators and Starters for your 1973 Dodge Coronet, and some of our most reviewed Carquest Premium parts include:
Starter Remanufactured Premium
from $83.99
(13)
Starter Remanufactured Premium
Starters
Starter  Remanufactured
from $76.99
(13)
Starter Remanufactured
Starters
Alternator: Remanufactured, 60 Amps
from $82.99
(11)
Alternator: Remanufactured, 60 Amps
Alternators

FAQs for 1973 Dodge Coronet Alternators and Starters

What are the most purchased Alternators and Starters for the 1973 Dodge Coronet?

Out of 26 Alternators and Starters for the 1973 Dodge Coronet, the most popular in our inventory are:
Voltage Regulator
from $29.05
(9)
Voltage Regulator
Voltage Regulators
Voltage Regulator
from $38.99
This product is not rated
Voltage Regulator
Voltage Regulators
Alternator: Remanufactured, 60 Amps
from $82.99
(4)
Alternator: Remanufactured, 60 Amps
Alternators

What are the top-rated 1973 Dodge Coronet Alternators and Starters?

Top-rated Alternators and Starters for your 1973 Dodge Coronet based on customer reviews/ratings are:
Alternator: Remanufactured, 60 Amps
from $67.99
(8)
Alternator: Remanufactured, 60 Amps
“I bought this to replace the original alternator in my ’74 Charger. I wasn’t getting any charge at idle, and had flattened my battery on a couple of ”
Starter Remanufactured Standard
from $62.99
(8)
Starter Remanufactured Standard
“Bought a story for my 64 Dodge Palera It looked a little different but work just fine”
Ball Bearing
from $13.29
(7)
Ball Bearing
“Easy to find and exactly as described. Good price.”