1973 Dodge B100 Van Differentials

Essential 1973 Dodge B100 Van Differentials

Yukon Gear – Replacement Standard Open Carrier Case For Dana 60, 4.10 & Down (Part No.20047)

Replacement Standard Open Carrier Case For Dana 60, 4.10 & Down

from

$339.99
Yukon replacement standard open carrier case for Dana 60, 4.10 & down Semi-Float & Full float, (incl ABS) 2-1/8″ tall.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 60
  • 4.10 and down ratio only
  • Does not include spider gears
See More

Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

Differential Side Bearing Screw Adjuster For 9.25" Chrysler

from

$64.99
Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:
  • Side adjuster for Chrysler 9.25″ rear
See More

Yukon Gear – Differential (Part No.26040)

Differential

from

$939.99
Differential

Powertrax – Lock Right Locker (Part No.1240-LR)

Lock Right Locker

from

$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

    Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

    from

    $37.99
    Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

    Product Features:
    • Redi-Sleeve yoke saver
    • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

    Replacement Baffle For Dana 60 & Dana 70-U

    from

    $6.99
    Product Features:
    • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
    See More

    Felpro – Differential Carrier Gasket (Part No.RDS 6583)

    Differential Carrier Gasket

    from

    $6.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – 20 Long Air Line For Zip Locker (Part No.34002)

    20 Long Air Line For Zip Locker

    from

    $29.99
    20 long air line for Zip Locker.

    Product Features:
    • Air line
    • 20′ in length
    See More

    Yukon Gear – Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case (Part No.32052)

    Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case

    from

    $564.99
    89 housing nodular Iron Drop Out case, up to 500 HP, Billet adjuster for 8.75″ Chrysler. This dropout does not come with fill plug (Part number CHY612017).

    Product Features:
    • Fits Chrysler 8.75″
    • ’89’ case design
    • Nodular iron for added strength
    See More

    Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

    Seal Housing For Dana 60, Zip Locker, With O-Rings

    from

    $79.99
    Seal housing for Dana 60, Zip locker, with o-rings.

    Product Features:
    • Seal housing for Dana Spicer 60
    • Includes o-rings
    See More

    Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

    Replacement Carrier Shim Kit For Dana 60, 61 & 70U

    from

    $104.99
    Product Features:
    • Carrier shims for Dana Spicer 60 and 70U
    See More

    Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

    Replacement Inner Slinger For Dana 60

    from

    $9.99
    Product Features:
    • Inner oil slinger for Dana Spicer 60
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

    Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

    from

    $3.99
    Product Features:
    • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
    See More

    FAG US – CONE (Part No.KLM102949)

    CONE

    from

    $21.99
    CONE

    Yukon Gear – Minor Install Kit For Chrysler 42 8.75" Differential (Part No.12006)

    Minor Install Kit For Chrysler 42 8.75" Differential

    from

    $142.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

    Product Features:
    • Fits Chrysler 8.75″ ’42’ case
    • Included are a pinion seal, pinion nut, completete shim kit, marking compound and brush.
    See More

    National – Bearings (Part No.M86610)

    Bearings

    from

    $9.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    USA Standard Gear – Spartan Locker For Dana Spicer 60 With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17003)

    Spartan Locker For Dana Spicer 60 With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

    from

    $829.99
    The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

    Product Features:
    • Fits Dana Spicer 60 with 30 spline axles
    • Made from 9310 steel for added strength
    • Replaces the spiders in a standard carrier case
    See More

    Yukon Gear – Master Overhaul Kit For Chrysler 8.75" #89 Housing With 25520/90 Differential Bearings (Part No.14011)

    Master Overhaul Kit For Chrysler 8.75" #89 Housing With 25520/90 Differential Bearings

    from

    $339.99
    Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

    Product Features:
    • Fits Chrysler 8.75″ ’89’ case housing with 25520 carrier races
    • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
    See More

    Yukon Gear – 8.25" Chrysler Pinion Gear Thrust Washer (Part No.33273)

    8.25" Chrysler Pinion Gear Thrust Washer

    from

    $26.99
    8.25″ Chrysler pinion gear thrust washer.

    Product Features:
    • Pinion gear thrust washer
    • Fits Chrysler 8.25″
    See More

    Yukon Gear – Positraction Clutch Guide (Part No.33352)

    Positraction Clutch Guide

    from

    $8.99
    Positraction clutch guide.

    Product Features:
    • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
    • Compatible with Dura Grip positractions only
    See More

    Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Aggressive (Part No.16151)

    Replacement Clutch Set For Dana 44 Powr Lok, Aggressive

    from

    $232.99
    Product Features:
    • Clutch kit
    • Fits Dana Spicer 44 and Chrysler 8.75″ Powr Lok
    • Aggressive design
    See More

    Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

    Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread

    from

    $7.99
    Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

    Product Features:
    • Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
    • 7/8″ x 14 thread
    • 1 5/16″ socket
    See More

    Yukon Gear – Standard Open Notched Cross Pin Shaft For 9.25" Chrysler (Part No.33309)

    Standard Open Notched Cross Pin Shaft For 9.25" Chrysler

    from

    $84.99
    Standard Open notched cross pin shaft for 9.25″ Chrysler.

    Product Features:
    • Cross pin shaft
    • Fits Chrysler 9.25″
    • Standard open carrier only
    • Notched
    See More

    Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

    Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

    from

    $232.99
    Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
    See More

    Yukon Gear – Six Piece Side Gear And Thrust Washer Kit For Chrysler 8" And 9.25" (Part No.33278)

    Six Piece Side Gear And Thrust Washer Kit For Chrysler 8" And 9.25"

    from

    $98.99
    Six piece side gear thrust washer kit for Chrysler 8″ and 9.25″.

    Product Features:
    • Side gear thrust washer kit
    • Fits Chrysler 8″ and 9.25″
    See More

    Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

    Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

    from

    $67.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

    Product Features:
    • Powr Lok button kit
    • Fits Dana Spicer 30, 44 and Chrysler 8.75″
    See More

    Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

    Dana 60 & Dana 70 Power Lok Case Bolt

    from

    $7.99
    Dana 60 & Dana 70 Power Lok case bolt.

    Product Features:
    • Power Lok case bolt for Dana Spicer 60 and 70
    • 7/16 x 14 thread
    • 3.5″ long
    • 9/16″ hex head
    See More

    Popular 1973 Dodge B100 Van Differentials Categories

    1973 Dodge B100 Van Differentials

    Maybe you’re in the middle of a full rebuild of that 1973 Dodge B100 Van. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 351 different Differentials in our inventory ranging from $2.29 to $1,566.99. That means you can find the exact parts or products you need to keep that 1973 Dodge B100 Van running smoothly.

    Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1973 Dodge B100 Van. Yukon Gear, National, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1973 Dodge B100 Van, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 810 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 3.7 stars and Differential Pinion Shim Kit with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1973 Dodge B100 Van rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1973 Dodge B100 Van Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1973 Dodge B100 Van demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your B100 Van the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Dorman Differentials

    We carry Dorman parts in our stock across Differential Ring and Pinions categories, plus more. For a 1973 Dodge B100 Van, our most popular Dorman Differentials include:
    Differential Ring And Pinion Set
    from $384.99
    (2)
    Differential Ring And Pinion Set
    Differential Ring and Pinions

    Top 1973 Dodge B100 Van Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1973 Dodge B100 Van. Popular Felpro parts include:
    DIFFERENTIAL GASKET
    from $6.79
    (21)
    DIFFERENTIAL GASKET
    Rear Housing Cover Gaskets
    Differential Carrier Gasket
    from $6.49
    (1)
    Differential Carrier Gasket
    Automatic Transmission Differential Carrier Gaskets

    FAQs for 1973 Dodge B100 Van Differentials

    What are the most purchased Differentials for the 1973 Dodge B100 Van?

    Out of 351 Differentials for the 1973 Dodge B100 Van, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $23.99
    (7)
    Bearings
    Front Differential Pinion Bearings
    Ring Gear Bolt
    from $2.49
    This product is not rated
    Ring Gear Bolt
    Differential Ring Gear Bolts

    What are the top-rated 1973 Dodge B100 Van Differentials?

    Top-rated Differentials for your 1973 Dodge B100 Van based on customer reviews/ratings are:
    Differential Carrier Gear Kit
    from $219.99
    (6)
    Differential Carrier Gear Kit
    “Great customer service”
    Differential Pinion Shim Kit
    from $7.49
    (1)
    Differential Pinion Shim Kit
    “good product”
    Differential Crush Sleeve
    from $2.49
    (1)
    Differential Crush Sleeve
    “High quality, would buy again”