1973 Chevrolet Monte Carlo Ignition and Tune-Up Products

Below you will find various in-demand Chevrolet Ignition and Tune-Up Products, components and accessories for your 1973 Monte Carlo. Advance Auto Parts has popular Monte Carlo parts like Distributors, Spark Plugs, Ignition Boots and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Monte Carlo model years including 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 and more. Select a category of 1973 Chevrolet Monte Carlo Ignition and Tune-Up Products below and start saving instantly.

Popular 1973 Chevrolet Monte Carlo Ignition and Tune-Up Products Categories

Ignition Switch Bulbs

Spark Plug Wire Set Cut To Fits

Ignition Coil Boots

Standard Spark Plug Wires

Optional Spark Plug Wires

Ignition Conversion Kits

Distributor Cap Kits

Distributor Rotor Buttons

Ignition Starter Switches

Distributor Small Parts

Distributor Vacuum Advances

Points and Condensers and Kits

Ignition Coil Mounting Brackets

Ignition Capacitors

Ignition Tune-up Kits

Distributor Gears

Distributor Retainer

Ignition Switch Connectors

Distributor Leads

Distributor Mount Gaskets

Ignition Triggers

Distributor Hole Plug

Essential Ignition and Tune-Up Products for 1973 Chevrolet Monte Carlos

from

$23.99

Upgrade your vehicle with ZEVO® LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, ZEVO replacement bulbs are backed by a limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
NON-POLARITY DESIGN: Plug & play easy installation; SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$359.99

The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$499.99

Distributors

from

$499.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

6.25 in. Diameter
Absolutely the most accurate way to trigger the ignition.
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.

from

$13.99

All ignition system accessories are application matched components designed to restore your original ignition system to like new condition.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$214.99

GM Genuine Parts Ignition Starter are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Work with vehicle electronics to help optimize vehicle capabilities
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$16.99

ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$155.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance

from

$18.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$59.99

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$1.29

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$79.99

These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:

Tinned copper core allows virtually no resistance
Great for points and magneto
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$72.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$4.79

This spark plug is engineered for reliable ignition performance, featuring a standard center electrode design and durable nickel construction for both the center and ground electrode tips. The nickel material ensures excellent conductivity and resistance to wear, making it a dependable choice for maintaining consistent engine performance. Its tapered seat type provides a secure fit, enhancing the overall efficiency of the ignition system. Designed to deliver long-lasting durability and optimal functionality, this spark plug is a cost-effective solution for keeping your vehicle running smoothly. Whether you’re replacing a worn-out plug or performing routine maintenance, this high-quality component ensures dependable starts and efficient combustion.

Product Features:

Engineered with a standard center electrode design to ensure consistent and reliable ignition performance.
Constructed with durable nickel material for both the center and ground electrode tips, providing excellent conductivity and resistance to wear.
Features a tapered seat type for a secure fit, enhancing the overall efficiency of the ignition system.
Designed for long-lasting durability, making it a cost-effective solution for maintaining smooth engine operation.
Optimized to deliver dependable starts and efficient combustion, ideal for routine maintenance or replacing worn-out spark plugs.

from

$549.99

This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized ( . 006 In.) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

Product Features:

Includes built-in Rev Limiter

from

$33.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$41.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$64.99

Performance upgrade for 7mm OE applications, silicone jacket with fiberglass braid EPDM insulation, tinned copper core, rated at 450 degrees Fahrenheit. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end.

Product Features:

Silicone Spark Plug Boots
90 Degree Spark Plug Boot Angle
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$14.99

Chrome Finish

Product Features:

Edelbrock part No. 4802 hold-down distributor clamp is for 4.3L V6, small-block V8 and big-block V8 Chevys. It is constructed of die-cast zinc with a chrome finish. Kit includes stud, nut and a washer.
Includes stud, nut, & washer

from

$3.29

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Fel-Pro Oil Pan SnapUps 8mm bolts
Designed to hold up the pan and gasket, for one person installation
Engine$aver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$9.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system or operating system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$66.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$71.99

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$6.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$299.99

Our Chevrolet front drive distributors brought the need for a distributor plug. Both are billet aluminum and feature a slip collar to ensure correct installation depth.

Product Features:

Use On Engines w/Wet Sump Oil System And Front Drive Dist.
Supplied w/Bronze Gear
Must Be Used w/An MSD Crank Trigger
Adj. slip collar mounting flange for engines w/modified deck hts.
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear
QPQ coated polished steel shaft; guided by sealed ball bearings
Oversized Polished Steel Shaft w/QPQ Coating

from

$18.99

Distributor Condenser

from

$19.99

An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$59.99

Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.

Product Features:

Extra Thick Contact Arms
Large Radius Tungsten Contacts
High Strength Phenolic Rubbing Blocks
Prevents Points Float
Moisture-Proof Buna-N Condenser

Upgrade your 1973 Chevrolet Monte Carlo with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1973 Chevrolet Monte Carlo, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Monte Carlo functioning at its best. At Advance Auto Parts, we offer a wide selection of 174 Ignition and Tune-Up Products for the 1973 Chevrolet Monte Carlo, designed to meet your needs without breaking the bank. From Distributor replacements to Spark Plugs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1973 Chevrolet Monte Carlo at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $1.29 to $799.99, with an average price of $156.09. Our 174 Ignition and Tune-Up Products in stock come from 17 trusted brands, so you’re sure to find the right part for your 1973 Chevrolet Monte Carlo without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1973 Chevrolet Monte Carlo, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like ACDelco, MSD Ignition, Accel, and more. ACDelco Ignition and Tune-Up Products start at just $4.99 and boast an impressive 4.7 stars average rating from customers. MSD Ignition and Accel also bring quality to the table, with Ignition and Tune-Up Products available starting at $57.99, and at an average 4.2 stars rating. With 3,734 customer reviews and counting, our 1973 Chevrolet Monte Carlo Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1973 Chevrolet Monte Carlo is always ready to roll. We’re committed to providing you with everything you need to keep your Monte Carlo in top shape, all in one place. Start shopping confidently below for your 1973 Chevrolet Monte Carlo!

Best-Selling Distributors for 1973 Chevrolet Monte Carlos

Enhance the driving experience in your Chevrolet with 72 quality Distributor components, starting at $1.29.

show more show less

from

$3.29

Fel-Pro Oil Pan SnapUps 8mm bolts
Designed to hold up the pan and gasket, for one person installation
Engine$aver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$7.05

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$18.05

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
Distributor cap has aluminum terminals to match OE performance.
The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$207.99

ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:

Direct Plug In Factory Replacement Plug And Play
CNC Machined 6061 T6 Billet Aluminum Housing
High Dielectric Strenght Thermoplastic Cap With Br
4 Topin Module With Dwell Control Triggers At 75 R
Easy Access Fully Adjustable Mechanical Advance
Adjustable Vacuum Advance
Fit non computerized vehicles
High performance 4 pin module
Steel alloy drive gear compatible with either flat tappet or hydraulic roller camshafts.
All new components

from

$129.99

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$46.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$45.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$499.99

The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

Product Features:

Simple and clean three wire installation
Supplied w/An HEI Style Distributor Cap And Rotor
Accepts Cap-A-Dapts
Does not require an MSD Ignition Control
CARB E.O. Approved
Now includes built-in Rev Limiter
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear

from

$24.29

ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$8.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$18.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$46.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$45.99

Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:

PerTronix D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors

from

$7.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$33.99

Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:

PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.

from

$11.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$55.99

PerTronix D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors

from

$40.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$56.99

Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:

PerTronix D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap for Flame-Thrower distributors.

from

$39.99

This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI distributors.)

Product Features:

Replacement Canister
Vacuum Advance Mechanism
For Replacement On PN[8460/8461]
Size Replacement Canister For Distributor PN[8360/8361]

from

$40.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$40.99

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$59.99

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$48.99

PerTronix D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors

Most Popular 1973 Chevrolet Monte Carlo Spark Plugs

Customize your Chevrolet with 21 Spark Plugs products like Spark Plugs and Spark Plug Wire Set Cut To Fits, all priced under $99.99.

show more show less

from

$57.99

ACCEL’s patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are capable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Product Features:

Shorty Spark Plugs For Tubular Exhaust Headers
Eliminates Dimpling Headers For Added Clearance
Improves Spark Plug Access To Fit Socket Or Wrench
Shorter Overall Plug Length Vs. OE Style Plug
Copper Core Center Electrode
Projected Tip
Helps Eliminate Burned Spark Plug Boots
Shorty Header Spark Plug

from

$7.99

ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
Pure copper core provides great heat transfer and helps maximize plug durability
Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
Ribless insulator helps optimize plug to boot seal
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
High-Quality Suppressors: ACDelco Gold RAPIDFIRE Spark Plugs feature high-quality suppressors that help prevent misfiring, ensuring smooth and reliable engine performance.
Single Platinum Performance: Designed with a platinum center electrode tip, these spark plugs offer enhanced durability and consistent performance for everyday use.

from

$7.59

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs

from

$4.99

ACDelco GM Original Equipment Conventional Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

GM regularly updates production and service part designs to integrate new materials and technologies
High-Quality Copper Core: Designed with high-quality copper cores for reliable and efficient performance.
Nickel Center Electrode Tip: Features a nickel center electrode tip for enhanced durability and performance.
Outstanding Suppression Characteristics: Delivers reliable performance with excellent suppression characteristics.
Versatile Applications: Providing high-quality replacement options for various vehicles.

from

$4.29

Autolite Copper spark plugs are designed to provide reliable performance and durability, making them an excellent choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are engineered for extended life, while the mid-projection design optimizes spark delivery. A high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, contributing to superior strength and reliability. The nickel-plated shell offers exceptional corrosion resistance, ensuring long-lasting durability even in demanding conditions. With a tapered seat type and integrated resistor, these spark plugs are built to meet performance expectations, delivering quick starts and the power your vehicle needs.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
The integrated resistor minimizes electrical interference, ensuring smoother engine performance and reliable ignition.

from

$6.99

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
Reliable Performance: NGK V-Power spark plugs deliver consistent and reliable performance, making them a dependable choice for your vehicle’s ignition system.

from

$4.99

Autolite Platinum spark plugs are crafted for superior performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, enhanced acceleration, and improved fuel efficiency. The platinum firing tip prevents gap erosion, extending the service life, while the high alumina ceramic insulator offers excellent thermal conductivity and insulation for added strength. A multi-rib insulator design prevents flash-over, ensuring reliable operation, and the nickel-plated shell resists corrosion for long-lasting durability. With a mid-projection standard center electrode and a tapered seat type, these performance-grade spark plugs deliver consistent results. The combination of platinum and nickel materials in the electrode tips further enhances reliability, making them a trusted choice for maintaining engine efficiency and longevity.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Incorporates a mid-projection standard center electrode design to ensure consistent performance and reliable engine operation.

from

$6.99

The Double Platinum Spark Plug is engineered for exceptional durability and performance, making it a top choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring a longer service life compared to copper and standard platinum plugs. Its yttrium-enhanced ground electrode delivers superior heat transfer, allowing it to withstand high temperatures and pressure for extended durability. The high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. With a mid-projection center electrode and tapered seat type, this performance-grade spark plug is designed to deliver consistent ignition and efficiency. Both the center and ground electrode tips are crafted from platinum, ensuring robust functionality and lasting value for your engine.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with a mid-projection center electrode and tapered seat type to ensure consistent ignition and improved engine efficiency.

from

$8.49

The Premium DiamondFire Automotive Spark Plug is engineered for peak performance and efficiency, making it a standout choice for drivers seeking enhanced engine output. Featuring E3’s patented Diamond Fire edge-to-edge ground electrode, it delivers a faster, more complete burn for smoother acceleration and idle. The innovative “diamond-shaped” side wire electrode ensures quicker ignition of the air/fuel mixture, creating a larger flame kernel and improving power output by up to 6% on average. Its nickel center and ground electrode tips provide durability and reliable performance, while the tapered seat type ensures a secure fit. Pre-gapped at the factory for convenience, this spark plug also promotes cleaner combustion, reducing engine carbon deposits and contributing to fuel savings. Designed to maximize efficiency and power, its a smart upgrade for any vehicle.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

from

$63.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$99.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$12.99

The Iridium Power Spark Plug (ITF16) is engineered for unmatched performance and efficiency, featuring the world’s smallest 0.4mm Iridium Center Electrode for enhanced spark and maximum combustion. Its patented 360-degree laser welding ensures durability, while the U-groove and taper-cut ground electrode optimize flame propagation for superior ignition. Built to withstand extreme temperatures exceeding 4000 Deg F, this spark plug is burnished with nickel plating for exceptional corrosion resistance and high-temperature endurance. Designed for a wide range of applications, including classic and collector cars, it delivers superior performance with more horsepower, quicker starts, and fewer misfires under heavy loads. The advanced iridium technology enhances fuel efficiency, making it a cost-effective choice, while its low voltage requirement ensures reliable ignition with reduced energy consumption. Whether you’re seeking maximum power or improved fuel economy, this spark plug is built to perform under the most demanding conditions.

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000 degree Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power
Superior Performance: Designed for maximum performance under extreme conditions, this spark plug delivers more horsepower, faster and easier starts, and fewer misfires under heavy loads.
Enhanced Fuel Efficiency: The advanced iridium technology of the DENSO Iridium Power spark plug contributes to better fuel efficiency, making it an economical choice for your vehicle.
Low Voltage Requirement: This spark plug requires 5,000 volts less to fire compared to conventional spark plugs, ensuring reliable ignition with lower energy consumption.

from

$10.99

ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$9.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-enhanced alloy technology center electrode ensures superior wear resistance for extended performance life.

from

$4.49

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for optimal performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. They are resistant to oxidation and arc erosion, feature a multi-rib insulator to protect against misfire, and offer service intervals of up to 100,000 miles. Designed with high-quality materials, Motorcraft Spark Plugs ensure reliable performance for almost any application and are backed by Motorcraft’s Service Parts Warranty. They are an exact fit for Ford, Lincoln, and Mercury vehicles and help prevent false check engine lights, delivering the same performance and reliability as the original components installed during manufacturing.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.
Enhanced Durability: Engineered to meet strict Ford engineering standards, these spark plugs are designed to provide long-lasting performance and withstand harsh conditions.
Reduces Fuel Consumption: Specifically matched to engines to optimize fuel efficiency, helping you save on fuel costs.

from

$12.99

The Iridium TT Spark Plug combines the durability of an OE-style plug with the power and torque of high-performance engineering. Featuring the world’s smallest 0.4mm Iridium Center Electrode, it maximizes firing potential while the 0.7mm Needle Tip Ground Electrode promotes higher spark energy and minimizes heat quenching. Built with DENSO’s patented Iridium-Rhodium alloy formula, it offers unmatched durability and withstands extreme temperatures exceeding 4000 Deg F. The advanced 360-degree laser welding process ensures a robust bond and structural integrity, while the Twin-Tip Technology, derived from OE Super Ignition Plug design, blends a fine wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for ultimate endurance. This spark plug delivers over 100,000 miles of reliable performance, enhanced fuel economy, and reduced emissions, making it an eco-friendly and cost-effective choice. With premium materials and a tapered seat type, the Iridium TT Spark Plug is engineered for optimal performance and long-lasting reliability.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT
Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
Premium Materials: Features an Iridium Center Electrode Tip and a Tapered Seat Type for optimal performance and durability.

from

$2.79

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for optimal performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. Resistant to oxidation and arc erosion, they feature a multi-rib insulator to protect against misfires and offer service intervals of up to 100,000 miles. Designed with high-quality materials, Motorcraft Spark Plugs ensure reliable performance for a broad range of applications, including domestic and import cars and trucks of all makes and sizes. Backed by Motorcraft’s Service Parts Warranty, they are an exact fit for Ford, Lincoln, and Mercury vehicles, helping to prevent false check engine lights and providing the same quality as the original components installed during manufacturing.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.
Fuel Efficiency: These spark plugs help reduce fuel consumption, optimizing emissions and contributing to a more efficient engine performance.

from

$64.99

Silicone Spark Plug Boots
90 Degree Spark Plug Boot Angle
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$5.99

The spark plug is designed to deliver reliable ignition performance with its standard center electrode design, ensuring consistent and efficient combustion in your engine. Crafted with nickel for both the center and ground electrode tips, this spark plug offers excellent durability and resistance to wear, making it a dependable choice for long-term use. Its tapered seat type ensures a secure fit, enhancing the overall performance and compatibility with a wide range of vehicles. Built to withstand demanding conditions, this spark plug provides exceptional value by optimizing engine efficiency and contributing to smoother operation.

Product Features:

Designed with a standard center electrode to ensure consistent and efficient combustion for reliable engine performance.
Nickel construction on both the center and ground electrode tips enhances durability and resistance to wear, ensuring long-lasting functionality.
Tapered seat type provides a secure fit, improving compatibility and overall engine performance.
Built to withstand demanding conditions, optimizing engine efficiency and contributing to smoother operation.

Top Picks for 1973 Chevrolet Monte Carlo Ignition Boots

Upgrade Chevrolet Monte Carlos with top-quality Ignition Boots parts, including 16 OEM and aftermarket selections for your 1973 model.

show more show less

from

$172.99

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications

from

$89.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$63.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$68.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$79.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$79.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$176.99

The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:

150 Ohms/ft Of Resistance
600 F Rated Silicone Jacket
Stainless Steel Plug Terminals
Custom-fit Universal And Import Coverage
Pre And Post HEI Vehicles
Spiral-Wound Copper/Nickel Alloy

from

$199.99

ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerance, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:

Ceramic boots withstand up to 2,000░ Fahrenheit
Ceramic boots withstand up to 2,000° Fahrenheit
8mm double silicone construction black wire rated at 600░ F rated
8mm double silicone construction black wire rated at 600° F rated
500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
Universal and custom fit applications
Universal And Custom Fit Applications

from

$199.99

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$172.99

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$172.99

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$210.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle.The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Compensates For Exhaust Back Pressure When Used With Msd Pn 7766
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$210.99

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$210.99

Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions, ACCEL has the wire set for you. ACCEL Extreme 9000 Ceramic Boot Wires feature ultra high-temperature, double silicone, 8mm, 500 ohms/ft Ferro-Spiral core wire developed for performance use. The wire is rated at 600 degrees Fahrenheit peak and the black Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room or an application with high under-hood temps. ACCEL Extreme 9000 wires offer excellent energy delivery to the spark plugs through stainless steel spark plug terminals, while providing the highest level of RFI/EMI suppression.

Product Features:

Black Ceramic boots withstand up to 2,000░ Fahrenheit
Black Ceramic boots withstand up to 2,000° Fahrenheit
8mm double silicone construction black wire rated at 600░ F rated
8mm double silicone construction black wire rated at 600° F rated
500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
Universal and custom fit applications
Stainless Steel Plug Terminals

from

$210.99

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

In-Demand Ignition Coils and Boots for 1973 Chevrolet Monte Carlos

Select from 15 premium Ignition Coils and Boots parts for your 1973 Chevrolet Monte Carlo, with prices ranging from $13.99 to $199.99.

show more show less

from

$184.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle.The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Dt Series
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$43.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$41.49

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$79.99

An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$79.99

Graphite supression eliminates RFI/EMI
3,000 to 7,000 ohms per foot of resistance
Silicone Spark Plug Boots
450 Degree Temperature Rating

from

$38.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$13.99

All ignition system accessories are application matched components designed to restore your original ignition system to like new condition.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$83.99

Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:

12 Volt Coil
Oil-Filled Design
Arch Resistant Alkyd Top
Designed To Deliver Optimum Performance

from

$79.99

Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:

Engineered for higher energy output
Improved throttle responce
More high RPM power
Chrome Plated

from

$72.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$29.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

from

$199.99

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$184.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle.The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Eight Outputs Of Up To 680 Mj Of Energy
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$46.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$46.99

Edelbrock Ignition Coil No. 22739 is a universal 12-volt cannister-style coil designed as a high-quality direct bolt-on replacement for OEM ignition coils. This advanced coil has a primary resistance of 1.4 ohms with an output of 42,000 volts. Internally, each Edelbrock Coil features heavy-duty primary and secondary windings for higher energy and greater spark that can help to provide quicker starts with improved idle quality. With a durable oil-filled housing, Edelbrock Coils are resistant to heat, shock and vibration with an effective operating range of 0 to 6,500 RPM.

Product Features:

output of 42000V

Most Sold 1973 Chevrolet Monte Carlo Ignition Wires

Explore our best-selling Chevrolet parts for the 1973 Monte Carlo among 23 OEM and aftermarket options starting from $34.99.

show more show less

from

$158.99

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$79.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$153.99

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$71.99

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$94.39

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms Per Foot Of Resistance
550 Degree F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street/Strip Use
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$110.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$53.09

7mm Yellow Silicone Jacket
Street-driven Applications
Copper Core
Orange Spark Plug Boots
Pre HEI Vehicles
Universal Wire Set

from

$133.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$88.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$79.99

Tinned copper core allows virtually no resistance
Great for points and magneto
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$90.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$112.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$79.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$199.99

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$118.99

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications

from

$89.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

Silicone Spark Plug Boots
90 Degree Spark Plug Boot Angle
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating
Meets or Exceeds OE Resistance
Cooper Core
500 Ohms Resistance

from

$124.99

Custom Fit Spark Plug Wire Set

from

$79.99

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$172.99

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$199.99

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance

from

$190.99

Black Ceramic boots withstand up to 2,000░ Fahrenheit
Black Ceramic boots withstand up to 2,000° Fahrenheit
8mm double silicone construction black wire rated at 600░ F rated
8mm double silicone construction black wire rated at 600° F rated
500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
Universal and custom fit applications
Stainless Steel Plug Terminals

from

$34.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

Top-Rated Ignition and Tune-Up Products Brands For Your 1973 Chevrolet Monte Carlo

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1973 Chevrolet Monte Carlos. Below you’ll find some of our best rated Ignition and Tune-Up Products from ACDelco, MSD Ignition, and Accel, and more. Ignition and Tune-Up Products from these brands that fit a 1973 Monte Carlo start at just $4.99 and are rated as high as 4.7 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular ACDelco 1973 Chevrolet Monte Carlo Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1973 Chevrolet Monte Carlo, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Ignition and Tune-Up Products, specifically designed for the 1973 Chevrolet Monte Carlo. With over 3 ACDelco brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $9.99. Plus, with over 103 customer reviews and an average rating of 4.7 stars, you can trust that our ACDelco Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $4.99

(100)

Copper Core Spark Plug: Reliable Performance & Durability

“easy to use”

from $16.99

(1)

Ignition Capacitor

“Good quality. Can’t wait to see the difference.”

from $7.99

(2)

RAPIDFIRE Platinum Spark Plug: Reduces Misfires & Maximizes Durability

“Great product”

Popular MSD Ignition 1973 Chevrolet Monte Carlo Ignition and Tune-Up Products

MSD Ignition auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1973 Chevrolet Monte Carlo owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1973 Monte Carlo, Advance Auto Parts carries a full inventory of 3 MSD Ignition Ignition and Tune-Up Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these MSD Ignition Ignition and Tune-Up Products range from $71.99 to $172.99, plus, with more than 3 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $172.99

(1)

Wire Set; Super Conductor; Small Block Chevy with HEI Cap

“plug and go”

from $158.99

(1)

Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor

“Very good product and a great price!”

from $71.99

(1)

Wire Set; Street Fire; SBC; Socket Cap; under Manif

“Blinding a 327 for a 1953 Chevy pickup”

FAQs for 1973 Chevrolet Monte Carlo Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1973 Chevrolet Monte Carlos?

Out of 174 Ignition and Tune-Up Products that fit 1973 Chevrolet Monte Carlos, the following parts are the top sellers:

Copper Core Spark Plug: Reliable Performance & Durability (5391156) – $4.99
Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390079) – $4.29
Double Platinum Spark Plug: Long-Lasting Performance & Durability (11400013) – $10.99

What’s the price range for 1973 Chevrolet Monte Carlo Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1973 Chevrolet Monte Carlo start at $1.29 and go up to $799.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1973 Chevrolet Monte Carlo?

The average price for Ignition and Tune-Up Products for the 1973 Chevrolet Monte Carlo is $156.09. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Chevrolet Monte Carlo model years?

Yes, we currently carry Ignition and Tune-Up Products for 30 model years of Chevrolet Monte Carlos between 1970 and 2007. Ignition and Tune-Up Products are bought most frequently for the following model years: 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, and 1999.

What are the cheapest Ignition and Tune-Up Products for my 1973 Chevrolet Monte Carlo?

The cheapest 1973 Chevrolet Monte Carlo Ignition and Tune-Up Products we carry in stock are:

Engine Oil Pump Intermediate Shaft Guide (10999209) – $1.29
Spark Plug: Enhances Durability & Reduces Fuel Consumption (18090014) – $2.79
Distributor Mounting Gasket (5785529) – $3.29
Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390079) – $4.29
Standard Spark Plug: Enhances Durability & Reduces Fuel Consumption (11865567) – $4.49

What are the top-rated Ignition and Tune-Up Products that fit the 1973 Chevrolet Monte Carlo?

Out of 3,734 reviews by customers, our 1973 Chevrolet Monte Carlo Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1973 Chevrolet Monte Carlo and their top-rated products:

Ignition Switches
- 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (11920742) – $23.99
- Ignition Switch (5971217) – $24.29
- Ignition Switch (5971209) – $32.49
Ignition Coils and Boots
- 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (11920742) – $23.99
- Ignition Switch (5971217) – $24.29
- Ignition Switch (5971209) – $32.49
Spark Plugs
- 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (11920742) – $23.99
- Ignition Switch (5971217) – $24.29
- Ignition Switch (5971209) – $32.49

What types of Ignition and Tune-Up Products do you sell for my 1973 Chevrolet Monte Carlo?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1973 Chevrolet Monte Carlo:

Can I get help with 1973 Chevrolet Monte Carlo Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Ignition and Tune-Up Products and more.

What is your return policy for Chevrolet Monte Carlo Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Monte Carlo Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1973 Chevrolet Monte Carlo Ignition and Tune-Up Products

Sylvania – 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (Part No.194LED.BP2)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1702)

MSD Ignition – Distributors (Part No.85505)

MSD Ignition – Crank Trigger Kit; Small Block Chevy; 6? Balancer (Part No.8600)

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

GM Genuine Parts – Ignition Switch (Part No.D1432D)

ACDelco – Ignition Capacitor (Part No.D204)

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; HEI (Part No.31353)

Carquest – Distributor Cap (Part No.24E1007)

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Sealed Power – Engine Oil Pump Intermediate Shaft Guide (Part No.224-43343)

Accel – 8Mm Super Stock Copper Uni (Part No.4038B)

Accel – 8Mm Super Stock Copper Uni (Part No.4039)

Motorcraft – Spark Plug: Reliable Ignition with Nickel Electrode Design (Part No.SP-446-AX)

MSD Ignition – Super HEI Kit with Digital 6AL; Blaster SS Coil; HEI Adapter and 8.5mm Coil Wire (Part No.85001)

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1018)

Carquest Premium – Multi-Use Connector (Part No.PTA2515)

Accel – Universal Fit Super Stock 8mm Copper; Spark Plug Wire Set (Part No.4039B)

Edelbrock – Distributor Clamp No. 4802 For 4.3L V6 And Small-Block And Big-Block V8 Chevrolet (Part No.4802)

Felpro – Distributor Mounting Gasket (Part No.70194)

Carquest Premium – Distributor Primary Lead Wire (Part No.DLA1138)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1789)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Driveworks – Distributor Rotor (Part No.23031)

MSD Ignition – Oil Plug; Wet Sump; Chevy V8 (Part No.8513)

Mallory – Distributor Condenser (Part No.401)

Carquest Premium – Ignition Condenser (Part No.GAA1035)

Accel – Contact Set Hp 32 Oz (Part No.110128)

Felpro – Distributor Mounting Gasket (Part No.70194)

Carquest – Distributor Rotor (Part No.D138)

Carquest – Distributor Cap (Part No.C158)

Accel – Dist:Chev V8 Hei Vac (Part No.59107)

Carquest Premium – Distributor T1835: 100% New, With Cap and Rotor (Part No.T1835)

PerTronix – D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue (Part No.D4002)

PerTronix – D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black (Part No.D4000)

MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)

ACDelco – Ignition Distributor Cap (Part No.D308R)

Carquest Premium – Distributor Rotor (Part No.DAA1004)

Carquest Premium – Distributor Cap (Part No.CAE1058)

PerTronix – D4001 Flame-Thrower HEI Distributor Cap and Rotor Kit Red (Part No.D4001)

PerTronix – D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600700)

Carquest – Distributor Rotor (Part No.23A1019)

PerTronix – D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister (Part No.D9006)

Carquest – Distributor Cap (Part No.24E1023)

PerTronix – D600710 Cap Male Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600710)

PerTronix – D4051 Flame-Thrower HEI Distributor Cap Red (Part No.D4051)

PerTronix – D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor (Part No.D650710)

MSD Ignition – Vacuum Advance Mechanism (PN 8460/PN 8461) (Part No.8463)

PerTronix – D4050 Flame-Thrower HEI Distributor Cap Black (Part No.D4050)

PerTronix – D4052 Flame-Thrower HEI Distributor Cap Blue (Part No.D4052)

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

PerTronix – D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600701)

Accel – High-Performance Shorty Spark Plug: Enhanced Clearance & Heat Dissipation (Part No.8199)

ACDelco – RAPIDFIRE Platinum Spark Plug: Reduces Misfires & Maximizes Durability (Part No.10)

Dorman – Help – Spark Plug Non-Foulers – 14mm Tapered Seat (Part No.42006)

NGK – G-Power Spark Plug (YR5GP): Enhanced Durability & Fuel Efficiency (Part No.2953)

ACDelco – Copper Core Spark Plug: Reliable Performance & Durability (Part No.R45TS)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.26)

NGK – V-Power Nickel Spark Plug (YR5): Enhanced Ignitability & Reliability (Part No.7052)

Autolite – Platinum Spark Plug: Improved Performance & Durability (Part No.AP26)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP26)

E3 – DiamondFIRE Automotive Spark Plug: More Power & Fuel Efficiency (Part No.E3.40)

Accel – 8Mm Super Stock Graphite Uni (Part No.4041)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, ITF16 (Part No.5330)

ACDelco – Double Platinum Spark Plug: Long-Lasting Performance & Durability (Part No.41-803)

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP26)

Motorcraft – Standard Spark Plug: Enhances Durability & Reduces Fuel Consumption (Part No.SP-425-A)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, ITF16TT (Part No.4715)

Motorcraft – Spark Plug: Enhances Durability & Reduces Fuel Consumption (Part No.SP-425)

Accel – Universal Fit Super Stock 8mm Copper; Spark Plug Wire Set (Part No.4039B)

Motorcraft – Spark Plug: Reliable Ignition & Nickel Durability (Part No.SP-425-X)

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with HEI Cap (Part No.35659)

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Accel – 8Mm Super Stock Graphite Uni (Part No.4041R)

MSD Ignition – Wire Set; Street Fire; SBC; Socket Distributor Cap over VC (Part No.5565)