1972 Subaru Deluxe Belts and Hoses
Find Your Specific 1972 Subaru Deluxe Belts and Hoses
Below you will find various in-demand Subaru Belts and Hoses, components and accessories for your 1972 Deluxe. Advance Auto Parts has popular Deluxe parts like Oil Cooler Hoses, Serpentine and V Belts, Heater Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Deluxe model years including
1973 and more. Select a category of 1972 Subaru Deluxe Belts and Hoses below and start saving instantly.
Popular 1972 Subaru Deluxe Belts and Hoses Categories
Essential Belts and Hoses for 1972 Subaru Deluxes
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.5" Inside Diameter (Sold by foot) (Part No.28410)
from
$3.29
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25253)
from
$26.99
Product Features:
See More
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)
from
$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Automotive XL« High Capacity V-Belt (Part No.9380)
from
$31.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Bando – Precision Engineered V-Belt (Part No.W100046034BAN)
from
$9.20
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.
Product Features:
See More
Product Features:
- Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
- Precision molded teeth are protected by durable fabric facing for long life
- Tensile cord is engineered and tested for maximum load carrying capabilities
- Rubber backing resists abrasion, oil and heat
Upgrade your 1972 Subaru Deluxe with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1972 Subaru Deluxe, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Belts and Hoses are key to keeping your Deluxe functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Belts and Hoses for the 1972 Subaru Deluxe, designed to meet your needs without breaking the bank.
From
Oil Cooler Hose
replacements to
Serpentine and V Belts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1972 Subaru Deluxe at great prices.
Our Belts and Hoses inventory for this model
ranges from just $3.29 to $87.99, with
an average price of $32.75.
Our 7 Belts and Hoses in stock come from 3 trusted brands, so you’re sure to find the right part for your 1972 Subaru Deluxe without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1972 Subaru Deluxe is always ready to roll. We’re committed to providing you with everything you need to keep your Deluxe in top shape, all in one place.
Start shopping confidently below for your 1972 Subaru Deluxe!
Best-Selling Oil Cooler Hoses for 1972 Subaru Deluxes
Enhance the driving experience in your Subaru with 2 quality Oil Cooler Hose components, starting at $48.49.
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Most Popular 1972 Subaru Deluxe Serpentine and V Belts
Customize your Subaru with 2 Serpentine and V Belts products
like V-Belts, all
priced under $31.49.
Gates – Automotive XL« High Capacity V-Belt (Part No.9380)
from
$31.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Bando – Precision Engineered V-Belt (Part No.W100046034BAN)
from
$9.20
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.
Product Features:
See More
Product Features:
- Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
- Precision molded teeth are protected by durable fabric facing for long life
- Tensile cord is engineered and tested for maximum load carrying capabilities
- Rubber backing resists abrasion, oil and heat
Top Picks for 1972 Subaru Deluxe Heater Hoses
Upgrade Subaru Deluxes with top-quality Heater Hoses parts, including 1 OEM and aftermarket selections for your 1972 model.
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.5" Inside Diameter (Sold by foot) (Part No.28410)
from
$3.29
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
In-Demand Engine Cooling Hoses for 1972 Subaru Deluxes
Select from 2 premium Engine Cooling Hoses parts for your 1972 Subaru Deluxe, with prices ranging from $21.79 to $26.99.
Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25253)
from
$26.99
Product Features:
See More
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)
from
$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
FAQs for 1972 Subaru Deluxe Belts and Hoses
Which Belts and Hoses are best-sellers for 1972 Subaru Deluxes?
Out of 7 Belts and Hoses that fit 1972 Subaru Deluxes, the following parts are the top sellers:
- 1/2" x 12′ Engine Oil Cooler Hose (19230057) – $48.49
- Metal Line Kit for Engine Oil Coolers (19230068) – $87.99
- Vulco-Flex½ II Flexible Coolant Hose (10911792) – $26.99
What’s the price range for 1972 Subaru Deluxe Belts and Hoses?
Belts and Hose prices for the 1972 Subaru Deluxe start at $3.29 and go up to $87.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1972 Subaru Deluxe?
The average price for Belts and Hoses for the 1972 Subaru Deluxe is $32.75. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Subaru Deluxe model years?
Yes, we currently carry Belts and Hoses for 1 model years of Subaru Deluxes between 1973 and 1973. Belts and Hoses are bought most frequently for the following model years: 1973.
What are the cheapest Belts and Hoses for my 1972 Subaru Deluxe?
The cheapest 1972 Subaru Deluxe Belts and Hoses we carry in stock are:
- Straight Heater Hose: EPDM, Direct Fit, 0.5" Inside Diameter (Sold by foot) (10504774) – $3.29
- Precision Engineered V-Belt (10811519) – $9.20
- Vulco-Flex« II Flexible Coolant Hose (10504620) – $21.79
- Vulco-Flex½ II Flexible Coolant Hose (10911792) – $26.99
- Automotive XL« High Capacity V-Belt (11520185) – $31.49
What types of Belts and Hoses do you sell for my 1972 Subaru Deluxe?
As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1972 Subaru Deluxe:
Can I get help with 1972 Subaru Deluxe Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Belts and Hoses and more.
What is your return policy for Subaru Deluxe Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Subaru Deluxe Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
