1972 Porsche 911 Ignition and Tune-Up Products

Spark Plug Wire Set

NGK tinned copper core wire sets provide excellent OE fit, performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. As required on certain Europ

Product Features:

• PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
• BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
• STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
• CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

Spark Plug Wire Set

Spark Plug Wire Set

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles.
• Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
• Durable construction – made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The Beru Spark Plug Connector is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

• OE-Equivalent and a direct fit application
• Meets or exceeds the OE specifications for durability and performance
• High profile insulation to prevent arching.
• Engineered to withstand extremes in temperatures

The Beru Spark Plug Connector is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

• OE-Equivalent and a direct fit application
• Meets or exceeds the OE specifications for durability and performance
• High profile insulation to prevent arching.
• Engineered to withstand extremes in temperatures

NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
• IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
• PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
• Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance and reliability.
• Optimized for OE Applications: Engineered specifically for Original Equipment (OE) applications, meeting the highest standards of quality and durability.
• Even Wear: Features a platinum pad on the ground electrode, designed for even wear in distributorless ignition systems.
• Fine Wire Tip Design: The fine wire tip design of the IFR6B model ensures efficient combustion and improved engine performance.

With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite continues to set the standard in spark plug technology. Designed and engineered in the USA, these spark plugs feature a copper-glass seal that bonds the insulator, terminal post, and center electrode together, ensuring full required voltage at the spark gap with a 100% leak-proof, gas-tight seal. The multi-rib insulator reduces the risk of flash-over, while the one-piece terminal post adds strength and durability. Additionally, the built-in resistor minimizes radio frequency interference (RFI) and electrode erosion, making these spark plugs a reliable choice for enhancing your vehicle’s performance.

Product Features:

• Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
• Multi-rib insulator reduces danger of “flash-over”
• One-piece terminal post adds strength
• Resistor reduces radio frequency interference (RFI) and electrode erosion
• Quick Starts and Smooth Acceleration: The Autolite Copper Spark Plug is engineered to deliver quick starts and smooth acceleration, enhancing your vehicle’s overall performance.
• Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you achieve better fuel economy, saving you money at the pump.

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

• Superior Surface Finish
• RFI Resistors (Asian) / RFI Suppression (European)
• Installation Screws
• Precision-machined Contacts
• Finely -tooled Metal Mounting Sleeve (Asian)

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

• Superior Surface Finish
• RFI Resistors (Asian) / RFI Suppression (European)
• Installation Screws
• Precision-machined Contacts
• Finely -tooled Metal Mounting Sleeve (Asian)

Bosch contact points open and close the primary circuit of the ignition coil for energy storage and voltage conversion. Long recognized as an industry leader in ignition and fuel systems, Bosch’s quality, innovation, and experience are the foundation of the entire line of engine management components.

Product Features:

• Top quality components made to last over 100 million switching cycles
• Polyimide rubbing block designed to withstand extreme stress
• Wear and temperature resistant
• Meets or exceeds OEM specifications
• Guaranteed fit and function

Bosch Ignition Condensers are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

• Superior Surface Finish
• Installation Screws

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

• CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
• CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
• CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

It is suggested that ignition coil be replaced when replacing this control unit. Installation Instructions By design, Perma-Tune ignitions make very little heat of their own. Wiring problems external of the unit will cause your Perma-Tune to get hotter to the touch than the other components under the hood. If this is the case we recommend you read the diagnostic instructions. The Model 911 increases spark energy three times that of the stock ignition system. This is why spark plugs will never foul again, can be set to .065″ spark plug gap and will actually recover from fuel contamination. The Perma-Tune system uses the points only as a sensor so they will generally last the life of the engine. Dwell is not a factor simply set the points to stock gap specifications and then adjust the engine timing using a timing light. The Model 911 Perma-Tune is designed to replace the stock ignition box and will bolt up and plug in to the same location as the stock system. If the connector on the box does not fit the car harness connector, you have the wrong box. If you have a turbo charged car, be certain that the speed relay has not caused the previous ignition box to fail before plugging in the new box. If you are installing a 911SC engine in a 911 body, use the model 911EX Engine Exchange kit. If you need a harness to install this ignition system, exchange it for a Model 911E Perma-Tune. Use the Plasma Drive Perma-Tune for late model Porsche engine management systems, hall effect distributors or after-market engine management computers. Use the Model MP Perma-Tune on magnetic pulse type distributors like the Porsche 917 or any other magnetic sensor. For Perma-Tune products,customer MUST call Perma-Tune directly @ 631-909-1011 PRIOR to claiming any unit as warranty. Or contact Perma-Tune @ for further information.

It is suggested that ignition coil be replaced when replacing this control unit. Installation Instructions The Model 930 6 pin Perma-Tune is designed to replace the stock ignition box and will bolt up and plug in to the same location as the stock system. The Model 930 6 pin is more than a replacement of the original ignition system; it is a performance upgrade boosting the spark energy by a factor of three. This increase in spark energy improves combustion efficiency resulting in more performance and less unburned fuel in the exhaust. Spark plug gap can be increased to .065″, (except on turbo charged cars with special spark plugs that cannot be re gapped) and solid core, unshielded copper spark plug wire can be used without causing radio noise problems. For Perma-Tune products,customer MUST call Perma-Tune directly @ 631-909-1011 PRIOR to claiming any unit as warranty. Or contact Perma-Tune @ for further information.

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

• Superior Surface Finish
• RFI Resistors (Asian) / RFI Suppression (European)
• Installation Screws
• Precision-machined Contacts
• Finely -tooled Metal Mounting Sleeve (Asian)

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

• Superior Surface Finish
• RFI Resistors (Asian) / RFI Suppression (European)
• Installation Screws
• Precision-machined Contacts
• Finely -tooled Metal Mounting Sleeve (Asian)

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

The task of the connector is to provide a reliable connection and transfer the electrical power – under extreme operating conditions. BERU connectors are designed in accordance with OEM requirements and equipped with original connecting pieces – irrespective of whether as a spark plug connector, ignition coil connector or distributor connector.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Direct Ignition Coil

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
• Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

BERU ignition coils are developed vehicle-specific according to OEM requirements with or without built-in electronic modules and are manufactured using the latest computer-controlled technology.

Product Features:

• High-precision ignition component
• Meets or exceeds the OE specifications for durability and performance
• Extremely temperature resistant
• Radio-Frequency Interference (RFI) Suppression
• Rational computer-controlled manufacturing techniques
• High-tech quality based on zero-defect program
• With or without electronics module depending on the vehicle type

Direct Ignition Coil

Ignition Conversion Kit

The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• 2:1 improvement over “points” in current fall time for increased coil output.
• Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
• Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
• Stable timing; no need for any adjustments.
• Pair with a Flame Thrower Canister Coil for optimal performance
• Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

Ignition Conversion Kit

Ignition Conversion Kit