1972 Jeep Wagoneer Performance Ignition Products
More 1972 Jeep Wagoneer Performance Ignition Products
Find your specific 1972 Jeep Wagoneer original or aftermarket Performance Ignition Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1972 Jeep Wagoneer Performance Ignition Products
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)
from
$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Distributor Wiring Harness (Part No.29349)
Accel – Spark Plug Wire (Part No.8847)
from
$119.99
Spark Plug Wire
Accel – 300+Race, Spark Plug Wire Set, 8.8mm (Part No.7043)
from
$141.99
These ACCEL wire sets are custom tailored for race engines and their builders. The oversize 8.8 mm wire is rated for 600 degrees Fahrenheit and 60kV. Resists heat, chemicals and moisture. High density insulation eliminates arcing. Route over and under headers.
Product Features:
See More
Product Features:
- 150 Ohms Per Foot
- 8.8mm Oversize Silicone Jacket
Accel – Custom Fit 8.8mm; Spark Plug Wire Set (Part No.8843)
from
$112.99
These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.
Product Features:
See More
Product Features:
- 8.8mm Graphite Suppression
- Silicone Spark Plug Boots
- 550 Degree Double Silicone Construction
- Fiberglass Braid
- Carbon/Graphite Core
- Magnetic Suppression
- Fiberglass/Kevlar Core
- 500 Ohms Resistance
Accel – 300+Race, Spark Plug Wire Set, 8.8mm (Part No.7047)
from
$141.99
These ACCEL wire sets are custom tailored for race engines and their builders. The oversize 8.8 mm wire is rated for 600 degrees Fahrenheit and 60kV. Resists heat, chemicals and moisture. High density insulation eliminates arcing. Route over and under headers.
Product Features:
See More
Product Features:
- 150 Ohms Per Foot
- 8.8mm Oversize Silicone Jacket
Accel – Super Coil Ignition Coil (Part No.140001)
from
$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Coil; Blaster 2; High Performance (Part No.8202)
from
$71.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Accel – Super Stock Coil (Part No.8140)
from
$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Contact And Condenser Kit (Part No.8101)
from
$51.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Accel – Contact And Condenser Kit (Part No.8104)
from
$56.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Accel – High Performance Contact Set 32 Oz (Part No.110128)
from
$46.99
ACCEL high-performance 32 ounce points resist point float up to 6,500 RPM. Extra-thick contact arms prevent flexing. Large tungsten contacts provide crisp circuit-breaking for peak coil output. Phenolic rubbing blocks endure heavy spring loads.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Mallory – Kit (Part No.401)
from
$14.99
Kit
Popular 1972 Jeep Wagoneer Performance Ignition Products Categories
1972 Jeep Wagoneer Performance Ignition Products
Maybe you’re in the middle of a full rebuild of that 1972 Jeep Wagoneer. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 10 different Performance Ignition Products in our inventory ranging from $25.99 to $141.99. That means you can find the exact parts or products you need to keep that 1972 Jeep Wagoneer running smoothly.
Performance Ignition Products are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Jeep Wagoneer. Accel, Mallory, and MSD Ignition are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Ignition Products for your 1972 Jeep Wagoneer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 214 reviews in this category, some of the top rated parts include Coil; Blaster 2; High Performance with 4.3 stars.
So if you’re in the market for aftermarket Performance Ignition Products to keep your 1972 Jeep Wagoneer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Ignition Products Brands To Make Your 1972 Jeep Wagoneer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Jeep Wagoneer demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your Wagoneer the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.
Popular Mallory Performance Ignition Products
We carry Mallory parts in our stock across Performance Ignition Parts categories, plus more. For a 1972 Jeep Wagoneer, our most popular Mallory Performance Ignition Products include:
Top 1972 Jeep Wagoneer Performance Ignition Products from Accel
Accel products are another trusted brand when it comes to Performance Ignition Products for your 1972 Jeep Wagoneer. Popular Accel parts include:
FAQs for 1972 Jeep Wagoneer Performance Ignition Products
What are the most purchased Performance Ignition Products for the 1972 Jeep Wagoneer?
Out of 10 Performance Ignition Products for the 1972 Jeep Wagoneer, the most popular in our inventory are:
from
$46.99
This product is not rated
High Performance Contact Set 32 Oz
Performance Points and Condensers
from
$141.99
This product is not rated
300+Race, Spark Plug Wire Set, 8.8mm
Performance Spark Plug Wires
What are the top-rated 1972 Jeep Wagoneer Performance Ignition Products?
Top-rated Performance Ignition Products for your 1972 Jeep Wagoneer based on customer reviews/ratings are:
