1972 Jeep Wagoneer Drivetrains
More 1972 Jeep Wagoneer Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1972 Jeep Wagoneer, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1972 Jeep Wagoneer Drivetrains
Driveworks – Oil Seal (Part No.S-3173)
from
$5.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Crown Auto Jeep Replacmnt – For Use With Front Or Rear Yokes, 12 Point Bolt (Part No.4006928K)
from
$9.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Yukon Gear – Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline (Part No.16168)
from
$399.99
Yukon positraction internals for Dana 44 Dura Grip posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Powr Lok. Fits Dura Grip ONLY.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 44 with Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Powertrax – Lock Right Locker (Part No.2110-LR)
from
$425.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Motive Gear – Ring Gear Bolt (Part No.1304)
Pro-King – Pinion Seal (Part No.720A070)
from
$4.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Omix – U-Bolt (Part No.18204.07)
from
$20.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
Product Features:
See More
Product Features:
- 3.25 in.
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – OE Replacement, Dana 44 (Part No.83503077)
from
$15.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Dorman – Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-149)
from
$3.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Powr Lok Flat Drive Plate For Dana 44 (Part No.16172)
Yukon Gear – Model 20 Gasket (Part No.23025)
Driveworks – Universal Joint (Part No.DW-365)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)
from
$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
- 1.560″ I.D.
- Fits standard open differentials only
Yukon Gear – Spindle Nut Kit For Dana 30, Dana 44 & GM 8.5" – Not CJ Or Scout (Part No.33475)
from
$37.99
Spindle nut kit for Dana 30, Dana 44 & GM 8.5″. Not CJ or Scout. This replaces Spicer part number 28068X.
Product Features:
See More
Product Features:
- Spindle nut kit for Dana Spicer 30, Dana Spicer 44 and GM 8.5″
- Will not fit Jeep CJ or Scout applications
Spicer – Universal Joint (Part No.5-760X)
from
$51.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Driveworks – Ball Bearing (Part No.S-207)
from
$19.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Minor Install Kit For Dana 44 Differential (Part No.12017)
from
$142.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44 front
- Included are a pinion seal, axle seals, complete shim kit, marking compound and brush.
Needa Parts – Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head, 1 Pack (Part No.090-018)
from
$11.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)
from
$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Powr Lok button kit
- Fits Dana Spicer 30, 44 and Chrysler 8.75″
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
Motive Gear – Differential Bearing Kit – Koyo (Part No.RA28LR)
from
$112.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- DANA-44 MED BRG & SEAL KIT 1968-UP
USA Standard Gear – Ring & Pinion Replacement Gear Set For Dana 44 In A 3.54 Ratio (Part No.36039)
from
$279.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44
- 8.50″ ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 3.54 ratio
Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)
Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.73 & Down (Part No.26026)
from
$869.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.73 ratio and down only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Motive Gear – Differential Carrier Shim Kit (Part No.1115)
Popular 1972 Jeep Wagoneer Drivetrains Categories
1972 Jeep Wagoneer Drivetrains
You count on your 1972 Jeep Wagoneer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 429 Drivetrains ranging in price from $3.29 to $1,487.99, you’re sure to find everything you need for your 1972 Jeep Wagoneer.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 18 different brands like Valvoline, Moog, and Driveworks. 1972 Jeep Wagoneer Drivetrains start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,227 extensive product reviews on 1972 Jeep Wagoneer Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Universal Joint with 4.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1972 Jeep Wagoneer below to get started!
Top-Rated Drivetrains Brands For Your 1972 Jeep Wagoneer
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1972 Jeep Wagoneer running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Milemarker Drivetrains
You’ll find popular Milemarker brand products across 4WD Components. All are waiting to get your 1972 Jeep Wagoneer back on the road. Some of the top-rated Milemarker products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1972 Jeep Wagoneer, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1972 Jeep Wagoneer Drivetrains
What are the most purchased Drivetrains for the 1972 Jeep Wagoneer?
Out of 429 Drivetrains for the 1972 Jeep Wagoneer, the most popular in our inventory are:
What are the top-rated 1972 Jeep Wagoneer Drivetrains?
Top-rated Drivetrains for your 1972 Jeep Wagoneer based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
from
$28.99
(12)
Universal Joint
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”
from
$6.49
(10)
Axle Housing Cover Gasket
“fit perfectly and was easy to work with.no more leaking rear differential.”
