1972 Jeep CJ5 Body Parts
Find Your Specific 1972 Jeep CJ5 Body Parts
Below you will find various in-demand Jeep Body Parts, components and accessories for your 1972 CJ5. Advance Auto Parts has popular CJ5 parts like Truck Beds, Vehicle Hoods, Vehicle Latches and Handles and more. You’ll also find aftermarket and OEM Body Parts for other CJ5 model years including
1975,
1976,
1977,
1978,
1979,
1980,
1981,
1982,
1983 and more. Select a category of 1972 Jeep CJ5 Body Parts below and start saving instantly.
Popular 1972 Jeep CJ5 Body Parts Categories
Essential Body Parts for 1972 Jeep CJ5s
Energy Suspension – Body Cab Mount Set (Part No.2.4103R)
from
$101.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
RT Offroad – Door Hinge Bracket Set, Left & Right Front Lower, Matte Black, Stainless Steel (Part No.RT34092)
from
$28.99
For over 45 years, Crown Automotive has been providing the Jeep(R) industry with outstanding quality replacement parts. That same quality and experience can now be found in our new line of Jeep(R) accessories and heavy duty components called RT Off Road.
Product Features:
See More
Product Features:
- Limited 12 Month Or 12,000 Mile Warranty
- Matte Black Powder Coat Finish
- Includes Hardware
- Direct Replacement For Factory Hinge
- Only Includes the Body Side Brackets
Crown Auto Jeep Replacmnt – Oem Replacement, Single (Part No.J5758964)
from
$302.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Steel Construction
- Leading Manufacturer Of Quality Replacement Parts For Jeep (R)
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
KAI – Window Crank Handle (Part No.CH1354104)
from
$6.99
New Standard Replacement Chrome Window Crank Handle, For CJ And Wrangler With Hard Doors
Product Features:
See More
Product Features:
- For CJ And Wrangler With Hard Doors
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rugged Ridge – Front Tube Bumper (Part No.11560.01)
from
$376.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Each front bumper has two welded light tabs for easy mounting of offroad lighting.
Product Features:
See More
Product Features:
- Gloss Black
- With Raiser
- Welded End Caps
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Powder Coated, Black, Steel (Part No.J5461361)
from
$28.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Rugged Ridge – Nerf Bars; Black (Part No.11504.01)
from
$524.99
Rugged Ridge Nerf bars are a classic addition to any Jeep. They not only have great off-road styling, but they give you a firm step up into your Jeep, plus some protection from debris.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Mounting Bracket
- .07 in. Wall Steel Tubing
- No Slip Step Pads
- Chip Resistant
Crown Auto Jeep Replacmnt – Grille Mount Bushing, Mounts Directly Under Frame (Part No.J0971669)
Omix – Body Fastener Kit; Tailgate; 55-75 Jeep CJ5/CJ6 (Part No.12215.02)
from
$591.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
Product Features:
See More
Product Features:
- 1955-1975 CJ5 & CJ6, Body Fastner Kit, With Tailgate (539 Pieces)
Bestop – Soft Top: Tigertop(tm) (Part No.51405-01)
from
$1496.00
The Tigertop provides that classic look for vintage vehicles. With roll up windows, and one piece doors, on some applications, you get classic styling, convenience, and modern quality. Easily attaches to vehicle with reinforced snaps for a clean, custom look. For appearance and durability, the premium fabric maintains shape in any temperature. Roll up side and rear windows for classic “safari” style, plus convenient ventilation. Kit comes with soft top and all necessary hardware. Some models include one piece doors. Most Bestop soft top parts can be replaced individually, extending the value of your purchase. Limited warranty.
Product Features:
See More
Product Features:
- Attaches w/Factory Snap Locations
- Windows Roll Up For Ventilation
- Both Side and Rear Windows Roll Up
- Snaps Are Reinforced
- Snaps Covered w/Fabric
- Includes Hardware and Soft Top
- Black Powdercoat Painted Hardware
- Full Soft Doors Included
K-Source – Mirror Assembly: Driver Side, Manual Adjustment, Foldable, 1 Pk (Part No.60020C)
from
$13.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
- Mirror glass is adjusted by moving Mirror head
- Manual folding for additional clearance
- Black
- Superior material and manufacturing process ensures the highest quality possible
Rugged Ridge – Entry Guard (Part No.11119.01)
from
$39.49
Protect your door threshold with this stylish pair of stainless steel door entry guards that are perfect to prevent paint scuffs and chips to your lower door sills or cover up any existing damage. No drill attachment makes installation a breeze.
Product Features:
See More
Product Features:
- Stainless Steel
- Protects Door Threshold From Damage
- Automotive Grade Double Sided Tape
- 2 Piece Kit
Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)
from
$50.99
The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.
Product Features:
See More
Product Features:
- Classic Styling Of Brite-Tread Aluminum
- Front Or Rear Wheel Protection
- Radius Notch Contours To The Fender Well
- Protected By A BriteGard Powder Coat Finish
Omix – Soft Top Snap Kit; 55-86 Jeep CJ5/CJ7/and CJ8 (Part No.93002)
from
$49.99
Soft Top Snap Kit; 55-86 Jeep CJ5/CJ7/and CJ8
Rugged Ridge – Door Mirror Arm Bushing Kit; Black; 55-86 Jeep CJ (Part No.11029.03)
from
$36.99
This pair of black anodized aluminum mirror arm bushings from Rugged Ridge is designed to hold the mirror arm firmly in place. One pair of bushings is required per mirror. Sold in pairs.
Product Features:
See More
Product Features:
- Black
- Aluminum
- Holds Mirror Arms
- Pair
Crown Auto Jeep Replacmnt – 1 Inch Diameter, Rubber, Single (Part No.J4000334)
from
$0.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
KAI – Hood Panel (Part No.CH1230126)
from
$624.99
New Standard Replacement Hood Panel
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Crown Auto Jeep Replacmnt – Front Or Rear fender Flare Nut, Black Plastic, Front Or Rear, Left Or Right (Part No.J4004868)
from
$1.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Omix – Rear-View Mirror; 72-02 Jeep CJ/Wrangler YJ/TJ (Part No.12020.03)
from
$47.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Black
- OE Style
- Direct Fit
- Easy To Install
Rugged Ridge – Door Grab Strap Pair, Cj-Yj Black 76-95 (Part No.11825.01)
from
$68.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
See More
Rugged Ridge – Door Mirror Arm Kit; Right; Bracket; Black; 55-86 Jeep CJ (Part No.11003.02)
from
$20.99
This black CJ style replacement mirror arm and bracket from Rugged Ridge is a replica of the factory original so you maintain that original equipment look while replacing those worn mirrors. Includes all necessary hardware. Fits right side only.
Product Features:
See More
Product Features:
- Black
- Right side
- Arm and Bracket
Crown Auto Jeep Replacmnt – Hood To Grille, 3/16 Inch Thick, Rubber, Single (Part No.5455348)
from
$2.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Prevents Hood From Contacting The Grille
Crown Auto Jeep Replacmnt – Black, Plastic, Single (Part No.J5455074)
from
$44.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Omix – Axle Snubber; 76-86 Jeep CJ Models (Part No.18271.07)
from
$6.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Left Or Right
- Front Or Rear
- OE Style
- Direct Fit
Crown Auto Jeep Replacmnt – Black, Metal, Single (Part No.HC2)
from
$7.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Omix – Grille (Part No.DMC-5752656)
from
$443.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Officially Licensed
- Steel
Rugged Ridge – Radiator Bug Shield (Part No.11213.02)
from
$86.99
Protect your front grille from bugs and debris with this durable black radiator bug shield. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching.
Product Features:
See More
Product Features:
- Black
- Mounts externally
- Includes Hardware
Rugged Ridge – Grille Screen; Stainless Steel (Part No.11106.01)
from
$167.99
Protect your front grille from bugs and debris with this stainless steel weather resistant radiator bug shield. Each externally mounted bug shield is perforated for better air flow. All shields are bound by soft rubber to prevent vehicle scratching.
Product Features:
See More
Product Features:
- Stainless Steel
- Weather Resistant
- Sold Individually
- Hardware Included
- Bound By Soft Rubber To Prevent Vehicle Scratching
Upgrade your 1972 Jeep CJ5 with Top-Quality Body Parts
When it comes to maintaining or upgrading your 1972 Jeep CJ5, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Body Parts are key to keeping your CJ5 functioning at its best. At Advance Auto Parts, we offer a wide selection of 103 Body Parts for the 1972 Jeep CJ5, designed to meet your needs without breaking the bank.
From
Truck Bed
replacements to
Vehicle Hoods
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1972 Jeep CJ5 at great prices.
Our Body Parts inventory for this model
ranges from just $0.99 to $1,620.00, with
an average price of $109.68.
Our 103 Body Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 1972 Jeep CJ5 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1972 Jeep CJ5 is always ready to roll. We’re committed to providing you with everything you need to keep your CJ5 in top shape, all in one place.
Start shopping confidently below for your 1972 Jeep CJ5!
Best-Selling Truck Beds for 1972 Jeep CJ5s
Enhance the driving experience in your Jeep with 4 quality Truck Bed components, starting at $143.99.
Covercraft – Truck Cab Cooler – Tan Flannel, Tan (Part No.CP11663TF)
from
$254.99
Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.
Product Features:
See More
Product Features:
- Protects Cab Area From UV & Heat Build-up
- Also Good For Snow & Ice Protection
- Easy to Install
- Stow Behind Seat
Covercraft – Truck Cab Cooler – Tan Flannel, Tan (Part No.CP11662TF)
from
$254.99
Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.
Product Features:
See More
Product Features:
- Protects Cab Area From UV & Heat Build-up
- Also Good For Snow & Ice Protection
- Easy to Install
- Stow Behind Seat
Covercraft – Truck Cab Cooler – Polycotton, Gray (Part No.CP11663PD)
from
$143.99
Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.
Product Features:
See More
Product Features:
- Protects Cab Area From UV & Heat Build-up
- Also Good For Snow & Ice Protection
- Easy to Install
- Stow Behind Seat
Covercraft – Truck Cab Cooler – Polycotton, Gray (Part No.CP11662PD)
from
$143.99
Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.
Product Features:
See More
Product Features:
- Protects Cab Area From UV & Heat Build-up
- Also Good For Snow & Ice Protection
- Easy to Install
- Stow Behind Seat
Most Popular 1972 Jeep CJ5 Vehicle Hoods
Customize your Jeep with 6 Vehicle Hoods products
like Lift Supports,
Hood Hinges, and
Hood Panels, all
priced under $624.99.
KAI – Hood Panel (Part No.CH1230126)
from
$624.99
New Standard Replacement Hood Panel
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Omix – Hood Support Shock; Replacement; Sold Individually; (Part No.11252.80)
from
$86.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
See More
Crown Auto Jeep Replacmnt – Black, Rubber (Part No.J0989844)
from
$53.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Rugged Ridge – Hood Lock Kit (Part No.11252.01)
from
$52.99
This black hood lock kit from Rugged Ridge features a special design that virtually disappears into the grille. Cam lock design keeps people out of the engine compartment of your Jeep. These clever applications install in minutes.
Product Features:
See More
Product Features:
- Hidden Behind Grille
- Keeps Your Jeeps Hood Locked
- Internal Lock Cover
- Easy to Install
Crown Auto Jeep Replacmnt – HOOD HINGE (Part No.55016588)
from
$33.99
HOOD HINGE
Crown Auto Jeep Replacmnt – Black, Plastic, Set Of 2 (Part No.488601)
from
$18.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Top Picks for 1972 Jeep CJ5 Vehicle Latches and Handles
Upgrade Jeep CJ5s with top-quality Vehicle Latches and Handles parts, including 13 OEM and aftermarket selections for your 1972 model.
Rugged Ridge – Paracord Grab Handle (Part No.13505.32)
from
$82.99
Paracord Grab Handle
Rugged Ridge – Ultimate Grab Handle- Black-All Jeep Roll Bars (With Or Without Covers), Pair 55 (Part No.13505.04)
from
$48.49
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
See More
RT Offroad – Stainless Steel Hood Catch Kit, Left & Right (Part No.RT34011)
from
$27.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications include Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- One kit includes A Pair of Hood Catches
- Includes all hardware need for installation
Rugged Ridge – GrabHandle (Part No.13505.01)
from
$46.99
GrabHandle
Rugged Ridge – Ultimate Grab Handle Kit; Green; 55-19 Jeep CJ/Wrangler YJ/TJ/JK/JL (Part No.13505.05)
from
$46.99
Ultimate Grab Handle Kit; Green; 55-19 Jeep CJ/Wrangler YJ/TJ/JK/JL
Rugged Ridge – Ultimate Grab Handle Kit; Red; 55-19 Jeep CJ/Wrangler YJ/TJ/JK/JL (Part No.13505.03)
from
$43.49
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
See More
RT Offroad – Grab Handle: Grab Handle Set, Left Or Right, Front Or Rear, Black, Deluxe (Part No.RT27007)
from
$36.99
RT Off-Road’s Deluxe Grab Handle Sets are a perfect way to add a handle to any vehicle with a roll bar. They feature molded rubber grips, thick nylon straps, and large sections of hook and loop fasteners to mount to the vehicle. Sold in pairs.
Product Features:
See More
Product Features:
- Easily adds grab handles to any vehicle with a roll bar
- Features molded rubber grips and thick nylon straps
- Sold in pairs
Rugged Ridge – Hood Catch (Part No.11116.03)
from
$22.29
This weather resistant polished 304 stainless steel hood catch was built as a strong direct replacement for the OE catches that degrade and fail after years of use.
Product Features:
See More
Product Features:
- Stainless Steel
- Weather Resistant
- Sold Individually
- Installs Directly Covering Factory Hinge Using Existing Hardware
Rugged Ridge – Hood Catch Kit Chrome (Part No.11302.01)
from
$22.29
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
See More
AutoCraft – Window Handle (Part No.76964)
from
$13.99
Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.
Product Features:
See More
Product Features:
- Ideal replacement – this window crank handle matches the fit and function of the original equipment component
- Durable construction – this window crank handle is made of durable material to withstand extended use
- Easy to install – this window crank requires no special tools to install
- Versatile design – this window crank handle is suitable for use in various locations in the vehicle
Crown Auto Jeep Replacmnt – Rubber Coated, Black, Metal, Single (Part No.HC4)
from
$12.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications include Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Limited 12 Month/ 12,000 Mile Warranty
Omix – Hood Catch Kit; Left Or Right; Use One Per Side (Part No.11210.04)
from
$9.79
This replacement hood catch from Rugged Ridge was built as a strong direct replacement for the OE catches that degrade and fail after years of use. Features a black powder-coated finish to prevent rust and corrosion.
Product Features:
See More
Product Features:
- Black Powdercoated
- OE Style
- Direct Fit
- Resistant To Rust and Corrosions
Crown Auto Jeep Replacmnt – Black, Metal, Single (Part No.HC2)
from
$7.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
In-Demand Bodies and Fender Parts for 1972 Jeep CJ5s
Select from 27 premium Bodies and Fender Parts parts for your 1972 Jeep CJ5, with prices ranging from $0.99 to $591.99.
Crown Auto Jeep Replacmnt – 1 Inch Diameter, Rubber, Single (Part No.J4000334)
from
$0.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)
from
$50.99
The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.
Product Features:
See More
Product Features:
- Classic Styling Of Brite-Tread Aluminum
- Front Or Rear Wheel Protection
- Radius Notch Contours To The Fender Well
- Protected By A BriteGard Powder Coat Finish
Energy Suspension – Body Cab Mount Set (Part No.2.4101R)
from
$33.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Crown Auto Jeep Replacmnt – Black, Plastic, Set Of 4 (Part No.J8997109)
from
$154.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Plastic Construction
- Meets Quality Standards
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy To Install
Omix – Hood To Grille Bumper; 76-86 Jeep CJ Models (Part No.12029.01)
from
$6.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Single
- OE Style
- Direct Fit
Energy Suspension – Body Cab Mount Set (Part No.2.4101G)
from
$33.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Crown Auto Jeep Replacmnt – Rubber, Black, Single (Part No.J5355483)
from
$7.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Metal And Rubber Construction
- Meets Quality Standards
- Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
- Easy To Install
Omix – Body Fastener Kit; Tailgate; 55-75 Jeep CJ5/CJ6 (Part No.12215.02)
from
$591.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
Product Features:
See More
Product Features:
- 1955-1975 CJ5 & CJ6, Body Fastner Kit, With Tailgate (539 Pieces)
Rugged Ridge – Nerf Bars; Black (Part No.11504.01)
from
$524.99
Rugged Ridge Nerf bars are a classic addition to any Jeep. They not only have great off-road styling, but they give you a firm step up into your Jeep, plus some protection from debris.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Mounting Bracket
- .07 in. Wall Steel Tubing
- No Slip Step Pads
- Chip Resistant
Omix – Fresh Air Box; 72-77 Jeep CJ Models (Part No.17906.01)
from
$323.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
Product Features:
See More
Product Features:
- 1972-1977 CJ5, 1972-1975 CJ6, 1976-1977 CJ7, 1966-1973 Commando, Fresh Air Box (With Brackets)
Crown Auto Jeep Replacmnt – Oem Replacement, Single (Part No.J5758964)
from
$302.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Steel Construction
- Leading Manufacturer Of Quality Replacement Parts For Jeep (R)
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Omix – Main Engine Bearing Set (Part No.17465.49)
from
$279.99
Are you rebuilding an engine and need a fresh set of main bearings? Omix-ADA offers high-quality replacement main bearing sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Standard
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Main Bearing Set; .010; 72-91 Jeep CJ/Wrangler YJ (Part No.17465.50)
from
$187.99
Are you rebuilding an engine and need a fresh set of main bearings? Omix-ADA offers high-quality replacement main bearing sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- .010 Over
- Engine Work May Be Required To Install This Part
Omix – Main Engine Bearing Set (Part No.17465.35)
from
$125.99
Are you rebuilding an engine and need a fresh set of main bearings? Omix-ADA offers high-quality replacement main bearing sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Standard
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Rugged Ridge – Body Mount Kit (Part No.18351.01)
from
$101.99
With these polyurethane body mount bushings, you can drastically improve your ride in just a few hours. One of the best and most cost-effective ways to improve the handling and feel of your pride and joy is to replace those mushy and worn-out body mount bushing.
Product Features:
See More
Product Features:
- Polyurethane
- Direct Fit
- Higher Level of Performance
- Long-lasting
Rugged Ridge – Body Mount Kit; Black (Part No.1-101BL)
from
$75.99
In this 14 piece black polyurethane bushing kit from Prothane, polyurethane based suspension, driveline and chassis components have been designed as an upgrade to the soft factory rubber components. Precision fabrication ensures a perfect fit.
Product Features:
See More
Product Features:
- Black Polyurethane
- Direct Fit
- Higher Level of Performance
- Long-lasting
Crown Auto Jeep Replacmnt – Black, Plastic, Single (Part No.J5455073)
from
$44.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Crown Auto Jeep Replacmnt – Black, Plastic, Single (Part No.J5455072)
from
$44.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Has Cutout For Side Marker Lens
Crown Auto Jeep Replacmnt – Black, Plastic, Single (Part No.J5455074)
from
$44.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Crown Auto Jeep Replacmnt – OE Replacement, With 24 Screws/ Nuts (Part No.7109K)
from
$35.99
Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Fender Flare Retainers Are Made To OE-Style For Your Application
- Attached To Your Jeep With A Nice, Tight Fit
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
- Long-Lasting, Durable Crown Automotive Products
Omix – Floor Drain Hole Cover (Part No.12023.38)
from
$33.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Plastic
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Powder Coated, Black, Steel (Part No.J5461361)
from
$28.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Crown Auto Jeep Replacmnt – OE Replacement (Part No.J0945577)
from
$10.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Omix – Switch Nut; 45-86 Willys/Jeep (Part No.17234.11)
from
$9.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Nut Only
- OE Style
- Direct Fit
Most Sold 1972 Jeep CJ5 Vehicle Doors
Explore our best-selling Jeep parts for the 1972 CJ5 among 9 OEM and aftermarket options starting from $6.99.
Rampage – Interior Accessories (Part No.769401)
from
$10.99
Product Features:
See More
- Helps Keep Any Door Manageable
- Easy Installation
- Adjustable
- Allows Door To Open To Desired Position
Rugged Ridge – Entry Guard (Part No.11119.01)
from
$39.49
Protect your door threshold with this stylish pair of stainless steel door entry guards that are perfect to prevent paint scuffs and chips to your lower door sills or cover up any existing damage. No drill attachment makes installation a breeze.
Product Features:
See More
Product Features:
- Stainless Steel
- Protects Door Threshold From Damage
- Automotive Grade Double Sided Tape
- 2 Piece Kit
RT Offroad – Door Hinge Bracket Set, Left & Right Front Lower, Polished Stainless (Part No.RT34007)
from
$36.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and
Product Features:
See More
Product Features:
- Limited 12 Month Or 12,000 Mile Warranty
- Highly Polished Finish
- Includes Stainless Hardware
- Direct Replacement For Factory Hinge
- Only Includes the Body Side Brackets
RT Offroad – Door Hinge Bracket Set, Left & Right Front Lower, Matte Black, Stainless Steel (Part No.RT34092)
from
$28.99
For over 45 years, Crown Automotive has been providing the Jeep(R) industry with outstanding quality replacement parts. That same quality and experience can now be found in our new line of Jeep(R) accessories and heavy duty components called RT Off Road.
Product Features:
See More
Product Features:
- Limited 12 Month Or 12,000 Mile Warranty
- Matte Black Powder Coat Finish
- Includes Hardware
- Direct Replacement For Factory Hinge
- Only Includes the Body Side Brackets
Rugged Ridge – Door Mirror Arm Kit; Right; Bracket; Black; 55-86 Jeep CJ (Part No.11003.02)
from
$20.99
This black CJ style replacement mirror arm and bracket from Rugged Ridge is a replica of the factory original so you maintain that original equipment look while replacing those worn mirrors. Includes all necessary hardware. Fits right side only.
Product Features:
See More
Product Features:
- Black
- Right side
- Arm and Bracket
Rugged Ridge – Replacement Mirror Arm And Bracket (Part No.11003.01)
from
$20.99
This black CJ style replacement mirror arm and bracket from Rugged Ridge are replicas of the factory original so you maintain that OE look while replacing those worn mirrors. Fits left side only.
Product Features:
See More
Product Features:
- Black
- Left side
- Arm and Bracket
- Limited 5 Year Warranty
Rugged Ridge – Footman Loop Kit (Long And Short), 55-95 Jeep Cj & Wrangler, Stainless (Part No.11105.01)
from
$20.79
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
Product Features:
See More
Product Features:
- 1976-1986 CJ5, 1976-1986 CJ7, 1981-1986 CJ8 Footman Loop Kit, Stainless Steel
- 1987-2006 Wrangler, 2004-2006 Wrangler Unlimited, Footman Loop Kit, Stainless Steel
Rugged Ridge – Door Check Strap Kit; Adjustable; 55-06 Jeep CJ/Wrangler YJ/TJ (Part No.12103.01)
from
$11.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
Product Features:
See More
Product Features:
- 1987-1995 Wrangler, Adjustable Door Limiting Straps, Black (Pair)
Crown Auto Jeep Replacmnt – Black, Plastic, Single (Part No.83500261)
from
$6.99
Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Constructed From Rubber
- Offers OE Fit And Function
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
- Long-Lasting, Durable Crown Automotive Products
FAQs for 1972 Jeep CJ5 Body Parts
Which Body Parts are best-sellers for 1972 Jeep CJ5s?
Out of 103 Body Parts that fit 1972 Jeep CJ5s, the following parts are the top sellers:
- 1 Inch Diameter, Rubber, Single (11740085) – $0.99
- Hood To Grille, Pull Through, Rubber, Round, 1"Dia X 1/4"Height, Black, Single (11740178) – $3.99
- Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (10971893) – $50.99
What’s the price range for 1972 Jeep CJ5 Body Parts?
Body Part prices for the 1972 Jeep CJ5 start at $0.99 and go up to $1,620.00 for the most premium parts.
What’s the average price of a Body Part for a 1972 Jeep CJ5?
The average price for Body Parts for the 1972 Jeep CJ5 is $109.68. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Body Parts for other Jeep CJ5 model years?
What are the cheapest Body Parts for my 1972 Jeep CJ5?
The cheapest 1972 Jeep CJ5 Body Parts we carry in stock are:
- 1 Inch Diameter, Rubber, Single (11740085) – $0.99
- OE Replacement, Metal, Single (50074738) – $0.99
- Front Or Rear fender Flare Nut, Black Plastic, Front Or Rear, Left Or Right (11900879) – $1.99
- MOLDING CLIP (50259319) – $1.99
- Door Mirror Bracket Bushing (10945636) – $2.29
What types of Body Parts do you sell for my 1972 Jeep CJ5?
As of 11/2/25, these are some of the most in-demand types of Body Parts for a 1972 Jeep CJ5:
Can I get help with 1972 Jeep CJ5 Body Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Body Parts and more.
What is your return policy for Jeep CJ5 Body Parts?
Advance Auto Parts keeps returns simple. For new Jeep CJ5 Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
