1972 International 1010 Suspension Parts
Find Your Specific 1972 International 1010 Suspension Parts
Below you will find various in-demand International Suspension Parts, components and accessories for your 1972 1010. Advance Auto Parts has popular 1010 parts like Air Suspension and Kits Shocks and Struts and more. You’ll also find aftermarket and OEM Suspension Parts for other 1010 model years including
1971
1973 and more. Select a category of 1972 International 1010 Suspension Parts below and start saving instantly.
Popular 1972 International 1010 Suspension Parts Categories
Essential Suspension Parts for 1972 International 1010s
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
Monroe – Load Adjusting Shock Absorber (Part No.58567)
from
$125.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Gas-Magnum Shock Absorber (Part No.34803)
from
$56.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.
Product Features:
See More
Product Features:
- DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
- BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Max-Air Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA727)
from
$106.99
Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Monroe – Gas-Matic Truck Shock Absorber (Part No.59001)
from
$48.49
Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic light trucks and vans
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Upgrade your 1972 International 1010 with Top-Quality Suspension Parts
When it comes to maintaining or upgrading your 1972 International 1010, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your International or enhancing its overall performance, Suspension Parts are key to keeping your 1010 functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Suspension Parts for the 1972 International 1010, designed to meet your needs without breaking the bank.
From
Air Suspension and Kit
replacements to
Shocks and Struts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1972 International 1010 at great prices.
Our Suspension Parts inventory for this model
ranges from just $25.99 to $125.99, with
an average price of $62.49.
Our 7 Suspension Parts in stock come from 2 trusted brands, so you’re sure to find the right part for your 1972 International 1010 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 International 1010, we stock popular OEM and aftermarket Suspension Parts from top names
like Valvoline Monroe, and more.
Valvoline Suspension Parts
start at just $36.49 and boast an impressive 5 stars average rating from customers.
With 11,110 customer reviews and counting, our 1972 International 1010 Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1972 International 1010 is always ready to roll. We’re committed to providing you with everything you need to keep your 1010 in top shape, all in one place.
Start shopping confidently below for your 1972 International 1010!
Best-Selling Air Suspension and Kits for 1972 International 1010s
Enhance the driving experience in your International with 4 quality Air Suspension and Kit components, starting at $25.99.
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
Monroe – Max-Air Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA727)
from
$106.99
Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Most Popular 1972 International 1010 Shocks and Struts
Customize your International with 3 Shocks and Struts products
like Rear Shock and Struts and
Front Shock and Struts, all
priced under $125.99.
Monroe – Gas-Matic Truck Shock Absorber (Part No.59001)
from
$48.49
Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic light trucks and vans
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Gas-Magnum Shock Absorber (Part No.34803)
from
$56.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.
Product Features:
See More
Product Features:
- DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
- BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Load Adjusting Shock Absorber (Part No.58567)
from
$125.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Top-Rated Suspension Parts Brands For Your 1972 International 1010
Shop for the best-rated brands offering Suspension Parts and other products for your 1972 International 1010s. Below you’ll find some of our best rated Suspension Parts from Valvoline and Monroe, and more. Suspension Parts from these brands that fit a 1972 1010 start at just $25.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 1972 International 1010 Suspension Parts
When it comes to maintaining or upgrading your 1972 International 1010, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1972 International 1010. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$36.49
$36.49
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon
“Good product”
Popular Monroe 1972 International 1010 Suspension Parts
Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 1972 International 1010 owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 1972 1010, Advance Auto Parts carries a full inventory of 6 Monroe Suspension Parts. Plus you will be keeping your International in peak condition while saving money because prices on these Monroe Suspension Parts range from $25.99 to $125.99, plus, with more than 59 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.
from
$48.49
$48.49
(47)
Gas-Matic Truck Shock Absorber
“Used on a custom setup. These are just what I need. Not going to get a lot of abuse.”
FAQs for 1972 International 1010 Suspension Parts
Which Suspension Parts are best-sellers for 1972 International 1010s?
Out of 7 Suspension Parts that fit 1972 International 1010s, the following parts are the top sellers:
- Gas-Matic Truck Shock Absorber (5530000) – $48.49
- Monroe Shock Absorber Air Hose Kit (5100001) – $36.49
- Monroe Shock Absorber Air Hose Kit (5100002) – $25.99
What’s the price range for 1972 International 1010 Suspension Parts?
Suspension Part prices for the 1972 International 1010 start at $25.99 and go up to $125.99 for the most premium parts.
What’s the average price of a Suspension Part for a 1972 International 1010?
The average price for Suspension Parts for the 1972 International 1010 is $62.49. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Suspension Parts for other International 1010 model years?
What are the cheapest Suspension Parts for my 1972 International 1010?
The cheapest 1972 International 1010 Suspension Parts we carry in stock are:
- Monroe Shock Absorber Air Hose Kit (5100002) – $25.99
- MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (8150020) – $36.49
- Monroe Shock Absorber Air Hose Kit (5100001) – $36.49
- Gas-Matic Truck Shock Absorber (5530000) – $48.49
- Gas-Magnum Shock Absorber (18570055) – $56.99
What are the top-rated Suspension Parts that fit the 1972 International 1010?
Out of 11,110 reviews by customers, our 1972 International 1010 Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1972 International 1010 and their top-rated products:
- Air Suspension and Kits
- MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (8150020) – $36.49
- Max-Air Air Adjustable Air Shock Absorber Pack of 2 (5560003) – $106.99
- Monroe Shock Absorber Air Hose Kit (5100001) – $36.49
- Shocks and Struts
- MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (8150020) – $36.49
- Max-Air Air Adjustable Air Shock Absorber Pack of 2 (5560003) – $106.99
- Monroe Shock Absorber Air Hose Kit (5100001) – $36.49
What types of Suspension Parts do you sell for my 1972 International 1010?
As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 1972 International 1010:
Can I get help with 1972 International 1010 Suspension Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about International Suspension Parts and more.
What is your return policy for International 1010 Suspension Parts?
Advance Auto Parts keeps returns simple. For new International 1010 Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
