1972 GMC C15/C1500 Pickup Towing Products

Essential 1972 GMC C15/C1500 Pickup Towing Products

Hopkins – Vehicle Wiring Kit (Part No.41105)

Vehicle Wiring Kit

from

$27.49
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:
  • Plug-In Simple® Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins (Part No.13099)

Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins

from

$396.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits older years of Ford, GMC and Chevy pickup trucks (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
  • Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins (Part No.14082)

Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins

from

$309.99
Whatever the next item is on your to-do list — whether it’s arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset — CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Chevy C30, C3500, C3500HD or Silverado 3500, Ford F Super Duty, F350, F350 Super Duty, F450 Super Duty or F550 Super Duty and GMC C3500, C3500HD or K3500 (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2″ receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Product Features:
  • Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight
  • Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Draw-tite Hitches – Class V Hitch (Part No.41947)

Class V Hitch

from

$414.99
Class I Trailer Hitch

Product Features:
  • 2″ Square Receiver Tube Opening
  • Ultra Frame receivers are designed for full size long wheelbase trucks, vans and utility vehicles with full frames and heavy-duty suspensions
  • Strong, secure heavy-duty side bracket design
  • Ideal for high tongue weight applications
  • Neat Appearance, All Frame Attachments
  • A-Coat Base with Black Powder Coat Finish
  • Rated up to 15,000 lbs. (GTW) Weight Carrying (WC)
  • Rated up to 16,000 lbs. (GTW) Weight Distributing (WD)
  • Solid All-Welded Construction for Maximum Strength and Safety
  • Custom Built According to Manufacturer & Model Year
  • Ensures Perfect Fit and Top Towing Performance
  • Computer-Aided Design and Fatigue Stress Testing
  • Designed to Withstand Road Abuse Within Specified Capacities
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity (Part No.12923)

Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity

from

$209.99
When a custom hitch is not available for your vehicle, CURT offers the multi-fit hitch. Designed to be the ultimate in versatility, CURT universal trailer hitches fit several different vehicle manufacturers, including Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Nissan, Oldsmobile, Plymouth, Pontiac and Toyota. The multi-fit hitch is a universally designed alternative to our custom hitches. It provides a more affordable option and flexibility in installation. Very simply, a CURT multi-fit trailer hitch uses a sliding or adjustable frame to match the width of your vehicle’s frame. In general, multi-fit hitches are used on mid-size and full-size pickup trucks and SUVs. This class 2 multi-fit trailer hitch features a gross trailer weight capacity of 3,500 lbs., a tongue weight capacity of 350 lbs. and a 1-1/4″ x 1-1/4″ receiver tube opening, making it an excellent choice for towing smaller utility trailers, boat trailers and popup campers, as well as cargo carriers and bike racks (NOTE: Never exceed the lowest weight capacity of any towing component). It comes with mounting hardware and instructions, and typically requires little or no drilling during installation.

Product Features:
  • Features an adjustable frame to fit a variety of vehicles
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Requires little or no drilling on most models
  • Protected by a durable high-gloss black powder coat finish
  • Equipped with an open-back receiver for easy cleaning
See More

Dee Zee – Dee Zee Headache Rack Mount, Rectangle, Black, Without Light, Side Mount (Part No.DZ95064)

Dee Zee Headache Rack Mount, Rectangle, Black, Without Light, Side Mount

from

$46.49
Add light mounts to your Dee Zee Aluminum or Steel Headache Rack or Rear Rack. With these convenient mounts that slide into the built in channel system, mounting your auxiliary lights is quick and easy. Several size options to meet your needs.

Product Features:
  • Made From Rugged Steel
  • Protective Gloss Black Powder Coat Finish
  • Utilize The Accessory Channel On Aluminum Cab Racks
  • Several Size Options To Meet Your Needs
  • Made In USA
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1358)

Trailer Connector Kit

from

$49.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Hopkins – 48035, 4 Flat Vehicle Side Towing Connector (48") (Part No.48035)

48035, 4 Flat Vehicle Side Towing Connector (48")

from

$7.99
Get your vehicle ready to tow the most common type of trailer on the road by installing this vehicle side 4 flat. This 4 flat connector carries the trailer’s basic lighting and includes printed wire functions that make installation quick.

Product Features:
  • 48 inch length
  • Corrosion Resistant Terminals
  • Most Commonly Used Trailer Connector
  • Found On Small Boat/Utility
  • Printed wire functions for easy wire reference
  • Printed Wire Functions For Easy Wire Reference
  • 100 Percent Tested
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55311)

Custom Wiring Harness (4-Way Flat Output)

from

$26.49
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Chevy Blazer, K5 Blazer, C10, C20, C30, K10, K20 and K30 pickup or Suburban and GMC C15, C1500, C25, C2500, C35, C3500, K15, K1500, K25, K2500, K35 and K3500 pickup or Suburban (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into existing OEM vehicle socket to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
See More

Dorman – Electrical – Trailer Wiring Accessories, Chevrolet/General Motors Trailer Plug-In (Part No.86083)

Electrical - Trailer Wiring Accessories, Chevrolet/General Motors Trailer Plug-In

from

$20.99
Convenient repair and replacement options for simple trailer wiring repairs.
See More

Milemarker – Winch Hydraulic Fittings (Part No.35-5020-15)

Winch Hydraulic Fittings

from

$124.99
For use with 75 Series and HI Series winches.

Product Features:
  • Winch Hydraulic Fittings
See More

CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins (Part No.13028)

Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins

from

$199.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 3500, C30, C3500, C3500HD, Ford F Super Duty, F350, F350 Super Duty, F450 Super Duty, F550 Super Duty, GMC C3500, C3500HD and K3500 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
  • Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Dee Zee – Dee Zee Headache Rack Mount, 250 Pound Capacity, Black, Aluminum, 2 Piece (Part No.DZ95002)

Dee Zee Headache Rack Mount, 250 Pound Capacity, Black, Aluminum, 2 Piece

from

$57.99
It does not matter what you haul, you need to make sure to secure it properly in order to protect your truck, yourself and other motorists. Dee Zee Cab Rack Tie Downs offer a reliable method for securing your cargo to your cab rack. Designed to fit into your cab rack integrated channel, our Tie Downs glide along your rack accessory channel tightening into place for virtually endless possibilities.

Product Features:
  • Tie Down Anchor For Cargo
  • Cast Aluminum Finish
  • Fits Into Integrated Channel In Cab Rack
  • No Drilling Required
See More

1972 GMC C15/C1500 Pickup Towing Products

You count on your 1972 GMC C15/C1500 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 11 Towing Products ranging in price from $7.99 to $414.99, you’re sure to find everything you need for your 1972 GMC C15/C1500 Pickup.

Brands matter. If you want to shop a specific Towing Products brand, we stock 6 different brands like Hopkins, CURT, and Dorman. 1972 GMC C15/C1500 Pickup Towing Products start as low as $7.99!

One of the best ways to find top quality OEM or aftermarket Towing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 60 extensive product reviews on 1972 GMC C15/C1500 Pickup Towing Products.

Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 1972 GMC C15/C1500 Pickup below to get started!

Top-Rated Towing Products Brands For Your 1972 GMC C15/C1500 Pickup

Trusted Towing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1972 GMC C15/C1500 Pickup running right for years to come. In our inventory you’ll find brands like Hopkins, CURT, Dorman, and even more.

Popular Hopkins Towing Products

You’ll find popular Hopkins brand products across Trailer Wiring. All are waiting to get your 1972 GMC C15/C1500 Pickup back on the road. Some of the top-rated Hopkins products in these categories are:
48035, 4 Flat Vehicle Side Towing Connector (48")
from $7.99
(5)
48035, 4 Flat Vehicle Side Towing Connector (48")
Trailer Wiring Kits

FAQs for 1972 GMC C15/C1500 Pickup Towing Products

What are the most purchased Towing Products for the 1972 GMC C15/C1500 Pickup?

Out of 11 Towing Products for the 1972 GMC C15/C1500 Pickup, the most popular in our inventory are:
Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins
from $199.99
This product is not rated
Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 60 Mins
Trailer Hitch-Class III/IV
Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins
from $309.99
This product is not rated
Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 60 Mins
Trailer Hitch – Class V
Vehicle Wiring Kit
from $27.49
This product is not rated
Vehicle Wiring Kit
Trailer Wiring Harness