1972 Dodge Charger Vehicle Hoods

The Outlaw cat-back exhaust system for the 2017-2023 Dodge Charger R/T and Daytona with 5.7L engine and standard bumper cutout configuration, is perfect for the person looking for aggressive exterior and interior sound levels. System features include dual 3.00-inch 409S stainless steel mandrel-bent tubing flowing into a Scavenger series X-pipe for maximum performance and unique deep sound. The race-proven Outlaw Series mufflers flow into large 3.00-inch mandrel-bent tailpipes with high quality active exhaust valves and are finished off with a pair of 4.00-inch stainless steel tips exiting out the factory exhaust cutouts. Designed for an easy fit, uses the factory hanger locations, includes all necessary hardware and comes with easy to follow installation instructions. Notes: This system is for cars with factory round cutouts in the rear bumper. Check out system No:817779 if your car has factory exhaust bezels in the rear bumper.

This non-link bar hydraulic roller lifter features short travel. This lifter’s short travel allows for light pre-load and reduced oil volume for the highest revving lifter for GEN III Chrysler 6.4L HEMI’s.

This Outlaw Cat-back exhaust system is designed for the 2017-2023 Dodge Charger R/T and Daytona models with the 5.7L Hemi engine and is perfect for the person looking for aggressive exterior and interior sound levels. System features include dual 3.00-inch mandrel bent 409S stainless steel tubing connecting to our exclusive Scavenger Series X-pipe for maximum performance and a deep unique sound. The system then flows into a pair of race-proven Outlaw Series mufflers expelling spent gases and sound through the large 3.00-inch tailpipes. The tailpipes include a high-quality pair of Active Exhaust Valves waiting to be paired with your vehicles factory actuators. The tailpipe then exits in the stock location through the factory exhaust bezels. The system includes all necessary parts, hardware, easy to follow installation instructions and is covered by our Limited Warranty. Notes: This system is for cars with factory exhaust bezels in the rear bumper. Check out system No:817845 if your car has factory round cutouts in the rear bumper.

The Flowmaster American Thunder Cat-back exhaust system for the 2015-2016 Dodge Charger R/T and 2015-2023 Chrysler 300 with the 5.7L Hemi engine is perfect for the person looking for an aggressive exterior and interior sound level with all of the performance benefits that you would expect from Flowmaster. This bolt-on 409S stainless steel system features a pair of Super 44 Series mufflers for a deep, aggressive sound. The system uses our dual 2.50-inch Scavenger Series X-Pipe and mandrel-bent tubing for maximum performance and a deep performance tone. The system is finished off with 2.50-inch stainless steel tips that exit within the factory exhaust bezels located in the rear bumper valence. Designed for an easy fit, this system includes all necessary parts and hardware for installation and includes our Limited Warranty. Notes: Does NOT fit Charger Pursuit models identified by round exhaust cutouts without factory exhaust bezels in the rear valance.

This Flowmaster American Thunder cat-back exhaust system for the 2017-2023 Dodge Charger R/T and Daytona models with 5.7L Hemi engine is perfect for the person looking for an aggressive exterior sound level with all of the performance benefits that you would expect from Flowmaster. This bolt-on 409S stainless steel system features a dual 3.00-inch mandrel-bent Scavenger Series X-Pipe for maximum performance flowing into a pair of specially designed Super 40 Series mufflers with 3.50-inch internals for maximum power and exterior sound quality, but with a moderate but pleasant interior tone at cruising speeds. Other features include dual 3.00-inch mandrel-bent tailpipes which are designed to re-use the factory exhaust valves and exit in the factory exhaust tips located in the rear valance. The tailpipes are a two-piece design and have no resonators. This system includes all necessary parts, hardware, and instructions for an easy installation.

“Engineered as a premium upgrade, the COMP Cams Non-MDS Lifters for Dodge Gen III HEMI engines, keep all 8 cylinders engaged at all times, allowing the use of performance camshafts without concerns about lifter failure. Designed as a major upgrade over the commonly sourced Dodge “”Hellcat”” lifters, this unique design enhances oil retention around the axle and bearing, helping to reduce wear and increase durability in all applications, stock to high performance. Additionally, extra material is strategically placed at the bottom of the lifter, adding strength and stiffness to the critical roller area. An ideal replacement for factory units, this drop-in lifter is designed to protect against roller bearing wear and lifter body breakage, it’s ideal for any stock, high performance or racing application. COMP Cams Non-MDS Dodge Gen III HEMI Lifters are available with or without lifter yokes. COMP lifter yokes perfectly align the lifters and are manufactured from a premium material to meet all factory/OEM requirements. One lifter yoke holds four non-MDS HEMI lifters, four yokes needed per engine.”

This Flowmaster Flow FX cat-back exhaust system for the 2018-2023 Dodge Charger GT / GT Plus and 2015-2023 Pursuit / Enforcer models with the 3.6-liter engine is manufactured using durable 409 stainless steel throughout and features 2.5-inch mandrel bent tubing for better exhaust gas flow. Dual Flow FX series mufflers are used for an aggressive to moderate exhaust note and increased performance. This system exits with dual 4.0-inch black ceramic coated stainless steel tips for added style and a custom look. Max gains of 11 hp and 8 lb.ft. of torque at the rear wheels over stock. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.

Competition Cams 10 Degree Steel Retainer for 26120 Beehive Spring, 795-1.

These short travel retro-fit XD hydraulic roller lifters feature a billet seat and short travel. These lifters’ short travel allows for light pre-load and reduced oil volume for the highest revving lifter for Chrysler 6.4 HEMI.

The Flowmaster American Thunder Cat-back exhaust system for 2015-2023 Dodge Charger SRT 392, R/T Scat Pack models with the 6.4L engine, as well as the SRT Hellcat with the 6.2L engine. This system is perfect for the person looking for an aggressive exterior sound level while maintaining a moderate interior sound with all of the performance benefits that you would expect from Flowmaster. The bolt-on 409S stainless steel system features our exclusive dual 3.00-inch Scavenger Series X-pipe assembly for maximum power and a deep unique tone. The mandrel-bent tubing flows into a pair of specially built Super 40 Series mufflers with 3.50-inch internals for a deep powerful sound. The tailpipes include valves with actuator stands for the factory MDS system, and the tailpipes are finished off with a pair of large 4.00-inch polished stainless steel tips embossed with the Flowmaster logo. The exhaust system is covered by Flowmaster’s Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home.

The Outlaw Cat-back exhaust system for 2015-2016 Dodge Charger R/T with 5.7L Hemi engine, and 2015-2023 Chrysler 300 with 5.7L Hemi engine is perfect for the person looking for an aggressive exterior and interior sound levels and who is not afraid of attention. System features include 409S stainless steel mandrel-bent tubing, our exclusive design 2.50-inch Scavenger Series X-pipe for a deep unique tone, and a pair of race-inspired Outlaw series mufflers for maximum performance. The 2.50-inch stainless steel tips finish off the system and exit out the factory exhaust bezels located in the rear bumper valance. Designed for an easy fit, this Flowmaster system includes all necessary parts, hardware and easy to follow installation instructions is covered by our Limited Warranty.