1972 Dodge B300 Van Performance and Racing Products

Name: Cylinder Head Gasket Set for Chrysler
Brand: Edelbrock
SKU: 7326
Price: 61.99 USD

Below you will find various in-demand Dodge Performance and Racing Products, components and accessories for your 1972 B300 Van. Advance Auto Parts has popular B300 Van parts like Performance Fuel Systems, Performance Engines, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other B300 Van model years including 1971, 1973, 1974 and more. Select a category of 1972 Dodge B300 Van Performance and Racing Products below and start saving instantly.

Popular 1972 Dodge B300 Van Performance and Racing Products Categories

Performance Oil Filters

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Performance Fuel Pumps

Performance Coils

Performance Distributor Cap and Rotor Kits

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Engine and Transmission Mounts

Performance Steering Stabilizers

Performance Engine Water Pumps

Performance Water Outlets

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Engine Intake Manifold Gaskets

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Oil Pans

Performance Ignition Kits

Performance Upper Performance Control Arm Bushings

Performance Exhaust Header Hardware

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Intake Manifold Hardware

Performance Lower Control Arm Bushings

Performance Engine Main Bearing Gasket Sets

Performance Transmission Shift Kits

Performance Oil Filler Caps

Performance Strut Rods and Kits

Performance Wheel Bearing Dust Caps

Performance Engine Cylinder Heads

Performance Torque Converters

Performance Flywheels

Performance Transmission Rebuild Kits

Manual Transmission Main Shaft Race

Essential Performance and Racing Products for 1972 Dodge B300 Vans

from

$61.99

Product Features:

Cylinder Head Gasket
1966-1987 318-340-360

from

$59.99

Product Features:

Non-Rotator Type
1.380 in. Outer Diameter
1.010 in. Inner Diameter
1.010 in. Coil Blind
Set of 16

from

$154.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1962-up TF727 transmissions and all internally balanced Chrysler, Dodge and Plymouth V8 engines with 6-bolt crankshaft flange. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.00 or 11.125 inch converter mounting locations and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$48.09

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$166.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1971-up Chrysler, Dodge and Plymouth 383, 400 and 440ci (externally balanced cast crankshaft) V8 engines with A727 transmission. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 and 11.125 inch bolt patterns and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$78.99

Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

Product Features:

IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F

from

$64.99

Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1965-1991 Chrysler 273-318-340-360 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Product Features:

Designed for 1965-1991 Chrysler 273-318-340-360 engines
Baffled for breather system compatibility
Sold in pairs
Triple chrome-plated steel construction
Stock height
Features OEM style sealing edge

from

$467.99

The B&M Transkit includes the same quality components used in a B&M street strip transmission, in a do it yourself kit. Our Transpak is included giving improved shift feel, while still retaining full automatic function.

Product Features:

High Perf. Friction Materials
Complete Overhaul Gasket Set
Modification Components
Replacement Valves
Replacement Springs

from

$17.79

Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:

Mechanical Fuel Pump Mounting Pad Cover For Chrysler V-8ft.S

from

$53.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$48.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$22.49

When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.

Product Features:

14 per Package
Heat-Treated For Strength
Ideal For Tight Spaces
Grade 5 Material
Protective Black Finish

from

$538.99

The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:

Improved Combustion And Economy
Increased Spark Plug Life
Improved Cold Weather Starting
Maintenance Free Operation
Accurate Spark Timing
Self-Lubricating Bushings
Years Of Trouble-Free Service

from

$28.99

Product Features:

5/16 in. Thick
Conforms to warped flanges, giving them better sealing capabilities
Graphite-impregnated facing and steel expanded metal core
Does not deteriorate or crack under excessive heat and pressure
Sold as a pair

from

$479.99

The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H

Product Features:

Universal Floor Mount Application
Cable Operated
Quick Installation
Accurate Shifting
NHRA/IHRA Reverse Lockout Meets Requirements
Use w/Reverse Pattern Valve Body
Includes Neutral Safety Switch
Includes Backup Light Switch

from

$879.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$14.29

Chrome plated breather cap is ideal for race car vacuum balance systems, as well as original equipment applications with positive crankcase ventilation (PCV).

Product Features:

Features 1″ O.D. neck and a 5/8″ O.D. breather tube
Breather has Metal/Foam Baffle inside and includes Grommet
Fits all aftermarket valve covers with a 1.22″ Dia. opening

from

$97.99

This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

Product Features:

Relocate oil filter to an easy access location

from

$72.99

This B&M Shift Improver kit fits all 1971-1977 Chrysler, Dodge and Plymouth TF727 transmissions with 6 cyl and V8 engines, along with A-904 transmissions with V-8 engines. This kit recalibrates your automatic transmission for optimum performance, extended life by eliminating shift overlap and excess wear on clutches & bands due to slippage. You get two modes of performance to select from: Stage 1 Heavy Duty, or Stage 2 Street/Strip. Stage 1 gives firm positive shifts without loss of driver comfort for improved shifting performance in all street vehicles. Street/Strip is for high performance street use or for competitive events for the enthusiast who wants the hardest hitting, quickest possible shifts. All you need are basic tools, the included installation instructions and in the space of an afternoon you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions!

Product Features:

Eliminates Shift Overlap
Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$351.99

Race winning performance. For 3500 to 8000 RPM high-performance engines. For oval track and drag race engines. Use appropriate racing carburetor.

Product Features:

For 3500 to 8000 RPM High-Performance Engines
for Oval Track And Drag Race Engines
Race Winning Performance
Use Appropriate Racing Carburetor

from

$106.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$30.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$85.29

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$26.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$186.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$12.09

If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Product Features:

Chrome Plated Steel
Set of 2 Caps
Easy Installation
2 Per Set

from

$91.99

Put an end to high maintenance point ignition systems by utilizing a specialized electronic circuitry and an infrared signal. Stabilizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.

Product Features:

Most Accurate Ignition Timing System
Improves Performance And Fuel Economy
Easy To Install With Simple Hand Tools
Reduced Maintenance
Eliminates Changing Points

from

$18.99

Oil Pan Bolt Kit

Upgrade your 1972 Dodge B300 Van with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1972 Dodge B300 Van, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your B300 Van functioning at its best. At Advance Auto Parts, we offer a wide selection of 78 Performance and Racing Products for the 1972 Dodge B300 Van, designed to meet your needs without breaking the bank. From Performance Fuel System replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1972 Dodge B300 Van at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $2,198.99, with an average price of $242.43. Our 78 Performance and Racing Products in stock come from 18 trusted brands, so you’re sure to find the right part for your 1972 Dodge B300 Van without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 Dodge B300 Van, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Accel, Mr. Gasket, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. Accel and Mr. Gasket also bring quality to the table, with Performance and Racing Products available starting at $12.09, and at an average 4 stars rating. With 3,276 customer reviews and counting, our 1972 Dodge B300 Van Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1972 Dodge B300 Van is always ready to roll. We’re committed to providing you with everything you need to keep your B300 Van in top shape, all in one place. Start shopping confidently below for your 1972 Dodge B300 Van!

Best-Selling Performance Fuel Systems for 1972 Dodge B300 Vans

Enhance the driving experience in your Dodge with 1 quality Performance Fuel System components, starting at $17.79.

show more show less

from

$17.79

Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:

Mechanical Fuel Pump Mounting Pad Cover For Chrysler V-8ft.S

Most Popular 1972 Dodge B300 Van Performance Engines

Customize your Dodge with 34 Performance Engines products like Performance Engine Intake Manifold Gaskets, Performance Engine Cylinder Head Gaskets, and Performance Intake Manifolds, all priced under $2,198.99.

show more show less

from

$36.49

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track use

from

$26.99

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$23.79

Spectre’s Chrysler water neck fits 1964 and later Chrysler V8 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts.

Product Features:

Fits 1964 and later Chrysler V8 engines
Includes bolts
Chrome plated
Easy to install
O-ring/gasket not included

from

$17.29

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$18.99

Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$111.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$26.99

Opens at 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$46.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$38.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$17.49

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:

Zinc plated to resist corrosion and provide a clean professional appearance
Made from Grade 5 steel for strength and durability
Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
Allen (socket) Head
Zinc Plated For Protection

from

$21.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$28.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$27.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$397.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used

from

$41.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$37.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$42.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$48.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$30.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$2198.99

The Edelbrock #5093 E-Street cylinder heads are designed for use with 1961-1979 Chrysler 361-440 c.i.d. Wedge engine applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads featur

Product Features:

Complete Pair For Hydraulic Flat Tappet
84cc Combustion Chamber Volume
210cc Intake/70cc Exhaust Runner Volume
2.14 in. Intake/1.81 in. Exhaust Valve Diameter
0.625 in. Deck Thickness

from

$1093.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$879.99

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$703.99

Hi-Ram Intake Manifold

from

$521.99

Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po

Product Features:

Idle-5500 RPM Range
Dual Plane Type-4150 Style Flange
4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
Black Powder Coated Finish
Non-EGR

from

$473.99

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. Accepts early-style waterneck only. Non-EGR. Mopar 340-360. 4 bbl carb. For street and high pe

Product Features:

Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed For 1500 To 6500 RPM
Dual-Plane High-Rise Intake
Accepts Early-Style Waterneck

from

$449.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 Deg Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used

from

$426.99

Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in

Product Features:

Maximum Cooling for Street and Racing Engines
Internal Passages Are Balanced for Maximum Flow
Impeller is Larger than Others For Max Pressure
Impeller Vanes Dramatically Increase Flow Rates
Equal Distribution to Both Sides of Block
Only Flows in One-Direction for Optimum Efficiency

from

$378.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$141.99

Product Features:

Non-Rotator Type
1.550 in. Outer Diameter
.190 Wire Size
Single Coil Spring Type
Set of 16

from

$61.99

Product Features:

Cylinder Head Gasket
1966-1987 318-340-360

from

$59.99

Product Features:

Non-Rotator Type
1.380 in. Outer Diameter
1.010 in. Inner Diameter
1.010 in. Coil Blind
Set of 16

from

$28.99

Product Features:

5/16 in. Thick
Conforms to warped flanges, giving them better sealing capabilities
Graphite-impregnated facing and steel expanded metal core
Does not deteriorate or crack under excessive heat and pressure
Sold as a pair

from

$27.49

These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:

Assures Accurate Torque App
Prevents Galling Manifold
Grade 5 Material
Black Oxide Coasted

from

$20.29

Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

Top Picks for 1972 Dodge B300 Van Performance Oil Filters

Upgrade Dodge B300 Vans with top-quality Performance Oil Filters parts, including 3 OEM and aftermarket selections for your 1972 model.

show more show less

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$97.99

Relocate oil filter to an easy access location

from

$14.29

Chrome plated breather cap is ideal for race car vacuum balance systems, as well as original equipment applications with positive crankcase ventilation (PCV).

Product Features:

Features 1″ O.D. neck and a 5/8″ O.D. breather tube
Breather has Metal/Foam Baffle inside and includes Grommet
Fits all aftermarket valve covers with a 1.22″ Dia. opening

In-Demand Performance Ignition Products for 1972 Dodge B300 Vans

Select from 8 premium Performance Ignition Products parts for your 1972 Dodge B300 Van, with prices ranging from $30.49 to $186.99.

show more show less

from

$85.29

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$42.49

Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:

42000 Volts
Effective To 6500 RPM
Quicker Starting
Improved Throttle Response
Higher RPM Power
Can Finished In Yellow

from

$49.99

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:

Improved output coil for electronic ignitions
Works w/Blaster Ignition Or MSD 5/6/7 Series
Ballast Resistor Required If Used w/Stock Points Ignition
Alkyd tower w/high dielectric properties lessens carbon tracking

from

$105.99

Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:

Oil Filled For Better Cooling
Optimized Low Resistance
Silicon Magnetic Steel E-Core
Higher Energy/Voltage Outputs
Quicker Starts
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$91.99

Most Accurate Ignition Timing System
Improves Performance And Fuel Economy
Easy To Install With Simple Hand Tools
Reduced Maintenance
Eliminates Changing Points

from

$30.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$186.99

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$176.99

Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:

Easy Installation
Improved Fuel Economy
Reduced Maintenance
Accurate Timing
Improved Performance
Provides A Simple Conversion
No Moving Parts To Wear Out

Most Sold 1972 Dodge B300 Van Performance Exhaust Products

Explore our best-selling Dodge parts for the 1972 B300 Van among 5 OEM and aftermarket options starting from $18.59.

show more show less

from

$18.59

Header Gasket Set

from

$38.49

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Has A Steel Core With Graphite Facing
Graphite Facing Has Excellent Thermo-conductivity
High Recovery Mat Allows For Better Seal Retention

from

$22.49

14 per Package
Heat-Treated For Strength
Ideal For Tight Spaces
Grade 5 Material
Protective Black Finish

from

$42.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Top-Rated Performance and Racing Products Brands For Your 1972 Dodge B300 Van

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1972 Dodge B300 Vans. Below you’ll find some of our best rated Performance and Racing Products from K&N, Accel, and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1972 B300 Van start at just $12.09 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1972 Dodge B300 Van Performance and Racing Products

When it comes to maintaining or upgrading your 1972 Dodge B300 Van, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1972 Dodge B300 Van. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 120 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$17.99

(120)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“Exactly what i wanted”

Popular Accel 1972 Dodge B300 Van Performance and Racing Products

Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1972 Dodge B300 Van owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 1972 B300 Van, Advance Auto Parts carries a full inventory of 5 Accel Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Accel Performance and Racing Products range from $42.49 to $717.99, plus, with more than 56 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from
$91.99

This product is not rated

Module:Eliminator Replacement

“”

from
$105.99

This product is not rated

Supercoil

“”

from
$717.99

This product is not rated

Ignition/Electrical

“”

FAQs for 1972 Dodge B300 Van Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1972 Dodge B300 Vans?

Out of 78 Performance and Racing Products that fit 1972 Dodge B300 Vans, the following parts are the top sellers:

Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $42.49
High Performance 180 Degree Thermostat for Increased Flow (17360033) – $26.99
Thermocap Radiator Cap (10648825) – $48.09

What’s the price range for 1972 Dodge B300 Van Performance and Racing Products?

Performance and Racing Product prices for the 1972 Dodge B300 Van start at $7.69 and go up to $2,198.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1972 Dodge B300 Van?

The average price for Performance and Racing Products for the 1972 Dodge B300 Van is $242.43. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Dodge B300 Van model years?

Yes, we currently carry Performance and Racing Products for 3 model years of Dodge B300 Vans between 1971 and 1974. Performance and Racing Products are bought most frequently for the following model years: 1974, 1973, and 1971.

What are the cheapest Performance and Racing Products for my 1972 Dodge B300 Van?

The cheapest 1972 Dodge B300 Van Performance and Racing Products we carry in stock are:

CUP (50206003) – $7.69
Dust Cap (22901302) – $12.09
Breather/Oil Filler Cap (17360086) – $14.29
PERFORMANCE OIL PAN GASKET SET (19781040) – $17.29
Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (17360285) – $17.49

What are the top-rated Performance and Racing Products that fit the 1972 Dodge B300 Van?

Out of 3,276 reviews by customers, our 1972 Dodge B300 Van Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1972 Dodge B300 Van and their top-rated products:

Performance Oil Filters
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120012) – $17.99

What types of Performance and Racing Products do you sell for my 1972 Dodge B300 Van?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1972 Dodge B300 Van:

Can I get help with 1972 Dodge B300 Van Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.

What is your return policy for Dodge B300 Van Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Dodge B300 Van Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1972 Dodge B300 Van Performance and Racing Products

Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7326)

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5892)

B & M – Flexplate, 6 Bolt Crank for TF 727 (Part No.10230)

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

B & M – Flexplate, TF 727 383 CID (Part No.10237)

Rancho – RS5000 Steering Damper (Part No.RS5403)

Spectre – Valve Cover (Part No.5274)

B & M – Transkit, 70-79 TF 727 (Part No.10229)

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-813)

Energy Suspension – Control Arm Bushing Set (Part No.5.3106R)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2947)

Mr. Gasket – Header Bolts (Part No.976)

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3757901)

Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7592)

B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)

B & M – Torque Converter, Holeshot 3000 (Part No.10425)

Mr. Gasket – Breather/Oil Filler Cap (Part No.2059)

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

B & M – Shift Improver Kit (Part No.10225)

Edelbrock – XX Victor W-2 Intake Manifold for Chrysler 340-360 w/Chrysler W2 Oval Port Head (Part No.2920)

Energy Suspension – Control Arm Bushing Set (Part No.3.3106G)

FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set (Part No.1807)

Mallory – Unilite Ignition Module (Part No.605)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Mr. Gasket – Dust Cap (Part No.2485)

Accel – Module:Eliminator Replacement (Part No.2005)

Mr. Gasket – Oil Pan Bolt Kit (Part No.6088)

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-813)

Mr. Gasket – Valve Cover Gasket Set (Part No.379)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Spectre – Water Neck; Chrysler (Part No.4739)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1808)

FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Mr. Gasket – High Performance Thermostat (Part No.4367)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 8 Piece Set (Part No.1214)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1213)

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)

Edelbrock – Intake Manifold Gasket for 1966-87 318-340-360 Chrysler engines (Part No.7276)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 4 Piece Set (Part No.1216)

Edelbrock – Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines (Part No.2176)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1608)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1243)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2947)

FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set (Part No.1807)

Edelbrock – Big-Block Chrysler E-Street Cylinder Heads 84cc (Part No.5093)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)

B & M – Torque Converter, Holeshot 3000 (Part No.10425)

Weiand – Hi-Ram Intake Manifold (Part No.1995)

Edelbrock – Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish (Part No.21763)

Edelbrock – RPM Air-Gap Small Block Chrysler Intake Manifold (Part No.7576)

Edelbrock – Performer Intake Manifold Small-Block Chrysler (Part No.3776)

Edelbrock – Water Pump Chrysler 1969-85 318/ 360 in Polished Finish (Part No.8887)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-222-3)

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7326)

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5892)

Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7592)

Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1611)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

Mr. Gasket – Breather/Oil Filler Cap (Part No.2059)

Mallory – Unilite Ignition Module (Part No.605)

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Accel – Supercoil (Part No.140001)

Accel – Module:Eliminator Replacement (Part No.2005)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

Flowtech – Header Gasket Set (Part No.99361FLT)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5935)

Mr. Gasket – Header Bolts (Part No.976)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1414)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)