1972 Dodge B200 Van Differentials

Essential 1972 Dodge B200 Van Differentials

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.75RLMK)

Differential Master Bearing Kit - Koyo

from

$131.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • CHRYSLR 8 3/4 LATE BRNG SL&GSKT M/K NO CARRIER SHIMS
See More

Yukon Gear – Standard Open Spider Gear Replacement Kit For Dana 60 And 61 With 35 Spline Axles (Part No.16085)

Standard Open Spider Gear Replacement Kit For Dana 60 And 61 With 35 Spline Axles

from

$301.99
Yukon standard open spider gear replacement kit for Dana 60 and 61 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 60 open differential with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Replacement Cross Pin Shaft For Dana 60, Fits Standard Open And Trac Loc Posi (Part No.33314)

Replacement Cross Pin Shaft For Dana 60, Fits Standard Open And Trac Loc Posi

from

$26.99
Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 60
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.88 Ratio (Part No.24062)

High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.88 Ratio

from

$454.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.88 ratio
See More

Yukon Gear – Pinion Seal For 8.75" Chrysler Or For 9.25" Chrysler With 41 Or 89 Housing (Part No.30121)

Pinion Seal For 8.75" Chrysler Or For 9.25" Chrysler With 41 Or 89 Housing

from

$13.99
Pinion seal for 8.75″ Chrysler or for 9.25″ Chrysler with 41 or 89 housing.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Chrysler 8.75″ with ’41’ and ’89’ case housings and 2000 and down Chrysler 9.25″
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Yoke For Chrysler 9.25" With A 7260 U/Joint Size. (Part No.41001)

Yoke For Chrysler 9.25" With A 7260 U/Joint Size.

from

$289.99
Yukon yoke for Chrysler 9.25″ with a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 9.25″ rear
  • 29 spline
  • 7260 u-joint size
  • Inside snap ring design
  • 2.125″ snap ring span
  • 1.078″ cap diameter
  • Strap style
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55047)

DIFFERENTIAL GASKET

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Replacement Baffle For Dana 60 & Dana 70-U

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
See More

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Differential Pinion Shim Kit

from

$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Powertrax – No-Slip Traction System (Part No.9203822705)

No-Slip Traction System

from

$527.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

    Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

    from

    $67.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

    Product Features:
    • Powr Lok button kit
    • Fits Dana Spicer 30, 44 and Chrysler 8.75″
    See More

    Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#41) Differential (Part No.13005)

    Pinion Install Kit For Chrysler 8.75" (#41) Differential

    from

    $292.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits Chrysler 8.75″ ’41’ case
    • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)

    Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front

    from

    $8.99
    Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.

    Product Features:
    • Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
    • 3/8″ x 24 thread
    • .866″ long
    See More

    Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)

    9.25" Pinion Gear Thrust Washer

    from

    $12.99
    9.25″ pinion gear thrust washer.

    Product Features:
    • Pinion gear thrust washer for Chrysler 9.25″ rear
    See More

    Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut (Part No.33137)

    Chrysler 8.75" (Coarse Spline) Pinion Nut

    from

    $5.99
    Chrysler 8.75″ (coarse spline) pinion nut. 3/4″ x 16.

    Product Features:
    • Pinion nut
    • Fits Chrysler 8.75″ with 10 spline pinion
    See More

    Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

    Drive Shaft Pinion Yoke

    from

    $117.99


    Product Features:
    • PINION YOKE
    • CAST:1310
    • U-BOLT STYLE
    See More

    Powertrax – No-Slip Traction System (Part No.9203923125)

    No-Slip Traction System

    from

    $579.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1106)

    Differential Carrier Shim Kit

    from

    $18.99


    Product Features:
    • CARRIER SHIM-DANA 60 & 70
    See More

    Yukon Gear – Dura Grip For Chrysler 9.25" Rear (Part No.26019)

    Dura Grip For Chrysler 9.25" Rear

    from

    $829.99
    The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

    Product Features:
    • Fits Chrysler 9.25″ rear
    • 4-spring, clutch style positraction
    • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
    • Fully rebuildable
    • Assembled in the USA
    See More

    Richmond Gear – Differential Gear Install Kit (Part No.83-1041-B)

    Differential Gear Install Kit

    from

    $42.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

    Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

    from

    $5.99
    Product Features:
    • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
    See More

    USA Standard Gear – Spartan Locker for Dana 60 Differential with 35 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17004)

    Spartan Locker for Dana 60 Differential with 35 Spline Axles, Includes Heavy-duty Cross Pin Shaft

    from

    $829.99
    The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

    Product Features:
    • Fits Dana Spicer 60 with 35 spline axles
    • Made from 9310 steel for added strength
    • Replaces the spiders in a standard carrier case
    See More

    Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

    Differential Side Bearing Screw Adjuster For 9.25" Chrysler

    from

    $64.99
    Differential side bearing screw adjuster for 9.25″ Chrysler.

    Product Features:
    • Side adjuster for Chrysler 9.25″ rear
    See More

    Yukon Gear – Chrome Replacement Cover For Dana 60 And 61 Standard Rotation (Part No.32005)

    Chrome Replacement Cover For Dana 60 And 61 Standard Rotation

    from

    $89.99
    Chrome replacement cover for Dana 60 and 61(not reverse rotation!).

    Product Features:
    • Fits standard rotation Dana Spicer 60
    • Chrome
    See More

    Popular 1972 Dodge B200 Van Differentials Categories

    1972 Dodge B200 Van Differentials

    Maybe you’re in the middle of a full rebuild of that 1972 Dodge B200 Van. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 327 different Differentials in our inventory ranging from $2.29 to $1,487.99. That means you can find the exact parts or products you need to keep that 1972 Dodge B200 Van running smoothly.

    Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Dodge B200 Van. National, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1972 Dodge B200 Van, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,586 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 3.7 stars and Bearings with 4.7 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1972 Dodge B200 Van rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1972 Dodge B200 Van Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Dodge B200 Van demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your B200 Van the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Dorman Differentials

    We carry Dorman parts in our stock across Differential Ring and Pinions categories, plus more. For a 1972 Dodge B200 Van, our most popular Dorman Differentials include:
    Differential Ring and Pinion Set
    from $384.99
    (2)
    Differential Ring and Pinion Set
    Differential Ring and Pinions

    Top 1972 Dodge B200 Van Differentials from National

    National products are another trusted brand when it comes to Differentials for your 1972 Dodge B200 Van. Popular National parts include:
    Bearings
    from $15.99
    (9)
    Bearings
    Front Differential Pinion Bearings
    Bearings
    from $6.99
    (6)
    Bearings
    Differential Bearings
    Bearings
    from $10.49
    (4)
    Bearings
    Rear Differential Pinion Bearings

    FAQs for 1972 Dodge B200 Van Differentials

    What are the most purchased Differentials for the 1972 Dodge B200 Van?

    Out of 327 Differentials for the 1972 Dodge B200 Van, the most popular in our inventory are:
    DIFFERENTIAL GASKET
    from $6.79
    (21)
    DIFFERENTIAL GASKET
    Rear Differential Cover Gaskets
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil
    Ring Gear Bolt
    from $2.49
    This product is not rated
    Ring Gear Bolt
    Differential Ring Gear Bolts

    What are the top-rated 1972 Dodge B200 Van Differentials?

    Top-rated Differentials for your 1972 Dodge B200 Van based on customer reviews/ratings are:
    Differential Carrier Gear Kit
    from $219.99
    (6)
    Differential Carrier Gear Kit
    “Great customer service”
    Bearings
    from $18.79
    (3)
    Bearings
    “as advertised”
    Differential Crush Sleeve
    from $2.49
    (1)
    Differential Crush Sleeve
    “High quality, would buy again”