1972 Chevrolet Townsman Performance Engines

Name: Cylinder Head Dowel Pins
Brand: Mr. Gasket
SKU: 4377
Price: 17.79 USD

Find your specific 1972 Chevrolet Townsman original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1972 Chevrolet Townsman Performance Engines

from

$17.79

Big Block Chevrolet tubular head dowel, .638/.639 inch o.d. (outer diameter) by 1/2 inch. Packaged two per set. These hard to find dowel pins are precision machined then case hardened for accurate alignment in engine assembly.

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$1070.99

Product Features:

Complete Single For Flat Tappet
110cc Combustion Chamber Volume
290cc Intake/110cc Exhaust Runner Volume
2.19 in. Intake/1.88 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$499.99

Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer
Washer Between Turbine and Cover

from

$73.99

These grade 8 alloy steel, longer length bolts are designed to compensate for thread length lost when using head bolt washers. This allows increased torque and clamping. Set of 16 does one cylinder head.

Product Features:

Cylinder Head Bolts
Longer-Than-Stock
High Quality Grade 8 Alloy
Increase Torque Settings
Higher Clamp Loads On Gasket

from

$16.49

Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:

8″ diameter
1970-73, 396-427-454 cu. in.
1967-69, 302 cu. in.
1965-68, 327 cu. in. hi-performance
1970-76, 400 cu. in.
1970-73, 350 cu. in.

from

$529.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$74.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets

from

$75.99

Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

Product Features:

Chrome plated
Grade 8
12-point head
AN washers with no exposed shoulder for a professional appearance

from

$20.29

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Steel core gasket construction
Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
Not intended for use in emission controlled vehicles.

from

$334.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$411.99

Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Designed to work with Torker II manifolds for performance from 2500 to 6500 RPM, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.

Product Features:

Designed for 2500 to 6500 Performance
Designed for Hi-Perf Street; Drag or Marine Use
Matched to Edelbrock Torker II Intakes
Includes Hydraulic Lifters and Assembly Lube
Dyno Matched/Street Proven Performance
Take The Guesswork Out Of Camshaft Selection

from

$157.99

Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:

3/8″ Diameter, 7.800″ Length
Magnum Pushrods for Small Block Chevy
One-piece .080″ wall chromemoly steel tubing
Heat-treated for extended durability and guide plate compatibility
Precision formed and reinforced pushrod end

from

$26.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$40.19

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material.
Provides excellent sealing and durability.
Can be trimmed if necessary for modified port applications.
Complete with manifold end seals and distributor gasket.
For OE replacement, high performance street, drag race and oval track use.

from

$402.99

Edelbrock #88503 Water Pump big block Chevy short black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling” Water Pu

Product Features:

Standard Impeller Rotation
0.625 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
5.750 in. Block To Hub Height
Black Finish

from

$213.99

These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed

Product Features:

Roller tip reduces friction while stiff design and superior ratio accuracy yield more effective valve lift
For applications with less than 350 lbs. of open spring pressure
Constructed from 8620 chromemoly steel, a superior material that will not flex and ensures maximum lift
Ultimate street roller rocker arm designed for serious performance enthusiasts

from

$95.99

Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:

Valve Spring Retainers for Use OE Cast Iron Heads
Superior Quality Heat-Treated Steel
Machined for Strength with Black Oxide Finish
Finish Ensures Rust and Corrosion Protection

from

$468.99

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM street-driven power. Dual-plane high-rise intake with 180 degree firing order. Produces incredible top-end horsepower. Retains good throttle response and acceleration. Larger plenum and runners maximize other upgrades. Edelbrock total power package maximizes gains. Available in cast, polished or endurashine finish.

Product Features:

Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock Total Power Package Maximizes Gains

from

$27.49

Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:

Complete with o-rings and mounting bolts
Features an o-ring style seal to prevent water leaks
Chrome plated
1/2″ NPT port can be used for various coolant temp related sensors or switches

from

$42.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$128.99

Product Features:

Provides excellent sealing and conformability
Releases+N747 clean without sticking, if the engine needs to be disassembled
Perfect companion for Edelbrock cylinder heads and intake manifolds
Does not include end seals
Use of a silicone sealant in place of end seal is recommended

from

$39.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$30.99

Manufactured from high-density cork and rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement and high performance street.

Product Features:

One-piece design
Eliminates potential leaks
Prevents over tightening
Prevents torque loss

from

$30.19

Mr. Gasket Performance Oil Pan Gaskets are manufactured from a high-density cork /rubber blend gasket material to provide excellent sealing and durability. Comes complete with molded rubber front/rear oil pan seals. For original equipment replacement and high performance street use.brbrFits Chevrolet 265,283,302,307,327,350,400 Gen I Small Block.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
Provides excellent sealing and durability
Complete with molded rubber front/rear oil pan end seals where applicable
For OE replacement and high performance street use

from

$29.49

Molded rubber gaskets are reusable, great for engines that require valve lash maintenance. These gaskets feature Nitrile material for long life, solid steel carrier for strength and rigidity. Incorporates compression limiters to prevent fastener over-tightening.

Product Features:

Features Nitrile Rubber Material For Long Life
Molded Rubber Gaskets Are Reusable
Ideal For Engine Requiring Valve Lash Maintenance

from

$25.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$253.99

Product Features:

Non-Rotator
1.500 in. Outside Diameter
1.082 in. Inside Diameter
1.340 in. Coil Blind
Set of 16

from

$65.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

Popular 1972 Chevrolet Townsman Performance Engines Categories

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Performance Engine Water Pumps

Performance Water Outlets

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Engine Harmonic Balancers

Performance Engine Intake Manifold Gaskets

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Camshaft and Lifter Kits

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Intake Manifold Hardware

Performance Engine Main Bearing Gasket Sets

Performance Engine Cylinder Head Bolts

Performance Engine Cylinder Head Installation Kits

Performance Engine Timing Cover Gasket Sets

Performance Engine Push Rods

Performance Engine Cylinder Heads

Performance Torque Converters

Performance Engine Valve Spring Retainer

Maybe you’re in the middle of a full rebuild of that 1972 Chevrolet Townsman. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 133 different Performance Engines in our inventory ranging from $14.99 to $1,322.99. That means you can find the exact parts or products you need to keep that 1972 Chevrolet Townsman running smoothly.

Performance Engines are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Chevrolet Townsman. Mr. Gasket, Edelbrock, and FEL-PRO Performance are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1972 Chevrolet Townsman, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 467 reviews in this category, some of the top rated parts include Action Plus Water Pumps with 3.7 stars and Action Plus Water Pumps with 1.5 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1972 Chevrolet Townsman rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1972 Chevrolet Townsman Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Chevrolet Townsman demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Townsman the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular B & M Performance Engines

We carry B & M parts in our stock across Performance Torque Converters categories, plus more. For a 1972 Chevrolet Townsman, our most popular B & M Performance Engines include:

from $339.99

(1)

Tork Master 2400

Performance Torque Converters

from $499.99

(1)

Tork Master 3000

Performance Torque Converters

Top 1972 Chevrolet Townsman Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1972 Chevrolet Townsman. Popular Mr. Gasket parts include:

from $26.99

(20)

High Performance 180 Degree Thermostat for Increased Flow

Performance Engine Coolant Thermostats

FAQs for 1972 Chevrolet Townsman Performance Engines

What are the most purchased Performance Engines for the 1972 Chevrolet Townsman?

Out of 133 Performance Engines for the 1972 Chevrolet Townsman, the most popular in our inventory are:

from $195.99

(7)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

Performance Intake Manifolds

from $39.49

(1)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

Performance Engine Cylinder Head Gaskets

from $27.49

This product is not rated

Lower Intake Manifold Gasket Set: 9 Piece Set

Performance Engine Intake Manifold Gaskets

What are the top-rated 1972 Chevrolet Townsman Performance Engines?

Top-rated Performance Engines for your 1972 Chevrolet Townsman based on customer reviews/ratings are:

from $215.99

(3)

Action Plus Water Pumps

“I bought this item for my 1979 Camaro SBC for Street/Strip application. Water pump weighs 4 LBS less than factory, comes with its own cork gaskets. N”

from $215.99

(2)

Action Plus Water Pumps

“The twisted neck comes to far up on the hub. For a 2 groove pulley it causes the pulley to hit the water pump. You will also need new bolts for the”

from $334.99

(1)

Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet

“put this cam and lifter kit in my 412 inch small block chevy. works well with patriot alum. heads and edelbrock duel quad intake. all this is running ”

1972 Chevrolet Townsman Performance Engines

More 1972 Chevrolet Townsman Performance Engines

Essential 1972 Chevrolet Townsman Performance Engines

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4377)

Edelbrock – Performer Big-Block Chevy Oval Hydraulic Flat Tappet Cam (Part No.60479)

B & M – Tork Master 3000 (Part No.20402)

Mr. Gasket – Ultra Seal: Cylinder Head Bolts (Part No.941G)

Mr. Gasket – Precision Timing Tape (Part No.1591)

Competition Cams – CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA (Part No.12-602-4)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7810)

Mr. Gasket – Intake Bolt Kit (Part No.5003)

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2103)

Edelbrock – Torker-Plus Camshaft Kit for 1957-1986 Small-Block Chevy 283-400 V8 (Part No.5002)

Competition Cams – Magnum 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set (Part No.7513-16)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Mr. Gasket – Intake Gasket (Part No.116)

Edelbrock – Water Pump Big-Block Chevy Short/Standard in Black Finish (Part No.88503)

Competition Cams – MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST (Part No.1412-16)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9721)

Edelbrock – RPM Air-Gap Big Block Chevy 2-R Intake Manifold (Part No.7562)

Mr. Gasket – Water Neck (Part No.2557)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2918)

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet (Part No.7361)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

Mr. Gasket – Oil Pan Gasket (Part No.197)

Mr. Gasket – Oil Pan Gasket (Part No.196)

Mr. Gasket – Valve Cover Gasket Set (Part No.585G)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1605)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 396-402-427-454 V8 (Part No.5895)

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

Popular 1972 Chevrolet Townsman Performance Engines Categories